Tripp Lite ENBRKTCVR Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite ENBRKTCVR (16 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
1
Installation Guide
Wireless Access Point Right-Angle
Wall Bracket with Cover
Model: ENBRKTCVR
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2018 Tripp Lite. All trademarks are the sole property of their respective owners.
Español 5 • Français 9 • 13Русский
2
Components List
Installation
IMPORTANT:
Ensure that you have received all parts according to the component checklist prior to installing. If any parts are missing or
faulty, visit www.tripplite.com/support for service.
(x1) (x1) (x1) (x1) (x1)(x4) (x2)
1. Mount Bracket to Wall
Mark the exact location of the
mounting holes
Attach the
bracket onto
the wall
Drill pilot holes
Find a wood stud
location for mounting
the wall mount
(Mounting Hardware
Not Included)
3
Installation
IMPORTANT!
Attach all data and power cables to the access point prior to attaching to the mount.
Installers are responsible for providing wall-mounting hardware. Use a minimum of two #10 x 2” or larger screws (not included) to secure the
mount in place.
Make sure that mounting screws are anchored into the center of the studs. Use of a studnder is highly recommended.
If there is no stud at the mounting location, it is recommended that you use four anchors to secure the mount in place. Due to the
weight of the mount, plastic expansion wall anchors are not recommended for drywall installations. Suitable anchors include: threaded
drywall anchors, threaded drywall toggles, sleeve-type hollow wall anchors (a.k.a. molly bolts) or toggle bolts.
If placing the mount over a telecommunications receptacle, remove the wall plate, then fasten the mount to the wall. Once secured,
fasten the wall plate back over the receptacle.
If no telecommunications receptacle is available, a surface mount box (or biscuit jack) and equipment cord can be mounted inside the unit.
Use an adhesive-backed surface mount box.
2. Run Data and Power Cable (If Required) Through the Mount’s Rear Cutout or
Side Conduit Cutouts
3. Using the Provided Screws, Attach the Access Point to the Mount
3a. Cisco Low-Profile Bracket
(AIR-AP-BRACKET-1)* Installation
3b. Cisco Universal Bracket
(AIR-AP-BRACKET-2)* Installation
AIR-AP-BRACKET-2
Security Tab Access Point
Security Tab
Zip Tie
(Included)
* Cisco brackets not included.


Produktspezifikationen

Marke: Tripp Lite
Kategorie: Nicht kategorisiert
Modell: ENBRKTCVR

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tripp Lite ENBRKTCVR benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Tripp Lite

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-