Tripp Lite DMBB110V Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite DMBB110V (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
Installation Guide
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
© 2020 Tripp Lite. All rights reserved.
Battery Box and Battery for the
Mobile Interactive Display
1. Important Safety Instructions 2
2. Installing the Battery in the Enclosure 3
3. Connecting the Battery to the Power Module 4
4. Connecting the Power Cables 5
5. Operational Guidelines for the Power Module 6
6. Attaching the Battery Box and Battery to the Mobile Cart 7
7. Warranty 8
The complete installation video for DMCSTP65CBP, DMCS32OXPGG
and DMCS60100XXBB models can be found at tripplite.com
2
1. Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed during the operation of this
product. Failure to heed these warnings may cause product damage, accident, fire, electric shock, serious
injury or death. The warranty may also be affected. Refer to the Interactive Touchscreen Owner’s Manual
for more information.
1.1 Battery Installation Warnings
• Batteries can present a risk of electrical shock and burn from high short-circuit current. Observe proper precautions. Do not
dispose of the battery in a fire. Do not open the power module or battery. Do not short or bridge the battery terminals with
any object. There are no user-serviceable parts inside the power module. At the end of the unit’s life, follow best practice
by discharging the battery prior to disposal. Refer to local codes for disposal requirements. Do not connect or disconnect
the battery when the unit is operating on battery power.
• Remove watches, rings or other metal objects.
• Wear safety gear and proper safety goggles while working to connect the battery. This will help reduce the chances of
personal injury while working with the battery.
• Use insulated tools. Under no circumstances allow the tools to touch the positive terminal or any other metal surface.
Failure to follow these directions will cause a dangerous short circuit that can lead to an electrical arc, burns and possibly
even an exploded battery.
• Sparks may result during final battery connection. To prevent sparks, always install the red Positive (+) Terminal first, then
the black Negative (-) Terminal. When disconnecting the battery, always disconnect the black Negative (-) Terminal first,
then the red Positive (+) Terminal. (Battery Connection: Red first and then black.)
• Do not place beverage containers or other liquids on the enclosure or any other accessory associated with the product.
• This product is intended to be used with a battery installed. Do not attempt to operate this product without a battery.
• The total load connected to this product must not exceed the nameplate rating.
1.2 Power Module Connection Warnings
• The power module contains its own energy source (external battery). The output terminals may be live even when the
power module is not connected to an AC supply.
• Connect the power module to a properly grounded AC power outlet. Do not modify the power module’s plug in a way that
would eliminate its connection to ground. Do not use adapters that eliminate the power module’s connection to ground.
• Do not plug the power module into itself; this will damage the power module and void the warranty.
1.3 Power Cord Connection Warnings
• Use only the AC input power cord supplied with the product or an approved replacement specified by the manufacturer.
• Confirm that the AC input power cord is securely connected to the product’s power inlet.
• Do not modify the plug, and do not use an adapter that would eliminate the ground connection.
• Do not bend the AC input power cord excessively, nor place heavy objects on the power cord. This may damage the cord.
• Do not unplug the AC input power cord from the display while the product is operating.
• Unplug the product during lightning storms; unplug the product when it will be unused for long periods of time.
• When unplugging the AC input power cord, firmly grasp the plug, not the cord. Pulling on the cord may damage it.
• Do not attempt to use a damaged power cord, plug or outlet. This may cause an electric shock or fire.
• If the power cord is damaged or feels hot, turn off the main power switch, allow the cord to cool and then unplug it.
•
Ensure that all cords connected to the product are properly routed and secured to prevent tripping and entanglement hazards.
3
2. Installing the Battery in the Enclosure
2.1 Preparing the Enclosure
1 Unlock the enclosure using the keys provided in the packaging.
2 Open the front door and
remove the U-shaped bracket
inside the enclosure by using
the included hex key to
loosen the screws.
Note: Save hardware for
reinstallation.
3 Reinstall and secure the U-shaped bracket to the outside of the enclosure
using the hex key and the screws from the previous step. Secure the
screws from the inside of the enclosure.
1
2
3


Produktspezifikationen

Marke: Tripp Lite
Kategorie: Nicht kategorisiert
Modell: DMBB110V

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tripp Lite DMBB110V benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Tripp Lite

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-