Tripp Lite CSC32USBWHG Bedienungsanleitung

Tripp Lite Handyladegerät CSC32USBWHG

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite CSC32USBWHG (24 Seiten) in der Kategorie Handyladegerät. Dieser Bedienungsanleitung war für 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/24

Table of Contents

1. Important Safety Instructions 2

2. Overview 3

3. Feature Identiﬁcation 3

4. Setup 4

4.1 Installing the Handle Bracket 4

and Power Cord Manager

4.2 Adjusting Storage Shelf Dividers 4

4.3 Powering the USB Charger/Hub Unit 4

4.4 Door Locks 4

5. 32-Port USB Charger/Hub 5

5.1 USB Charger/Hub Features 5

5.2 Connecting Devices to the 5

USB Charger/Hub

5.3 Connecting a Computer to the 6

USB Charger/Hub

6. Ultraviolet Light Operation 6

7. Speciﬁcations 7

8. Storage, Service and Cleaning 7

9. Warranty and Product Registration 8

Español 9

Français 17

Hospital-Grade USB Charging

Station Cart with Anti-Microbial

Coating and UV Light

Model: CSC32USBWHG

Owner’s Manual

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

WARRANTY REGISTRATION

automatically entered to win an ISOBAR®

surge protector in our monthly drawing!

tripplite.com/warranty

1. Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that must be followed during the installation and operation of the product described in this manual.

Failure to comply may invalidate the warranty and cause property damage or personal injury.

WARNING!

• The charging station is intended to sanitize mobile devices and non-critical medical devices. The subsequent use of the devices disinfected by the

charging station is the sole responsibility of the user.

• Non-protected eyes or skin should never be exposed directly to the ultraviolet light.

• Ultraviolet (UVC) bulbs contain mercury and must be properly recycled or disposed of as hazardous waste in accordance with local, state and federal

regulations.

• Only Tripp Lite-approved replacement UVC bulbs should be used in the device.

• Only qualified personnel should perform UVC bulb replacement. Take precautions with broken UVC bulbs to avoid inhalation, ingestion or contact

with eyes or skin. Refer to your local codes for disposal requirements.

• Do not bypass any of the safety precautions built into the device. Failure to comply may result in exposing skin to the UV light. Prolonged skin

exposure may generate redness and a sunburn-like condition.

• The charging station should not be operated by children.

• Do not remove any warnings, cautions or descriptive labeling from the charging station.

USB Charger/Hub Unit:

• To remove the USB Charger/Hub from the supply mains, the power cord serves as a disconnect device.

• If any of the following situations arise, schedule an appointment with a service technician to have your equipment inspected:

• The equipment has been exposed to moisture

• The equipment has been dropped and damaged

• The equipment shows obvious signs of breakage

• The equipment is not functioning properly or is not functioning according to the instructions described in this Owner’s Manual

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support

equipment or to significantly affect its safety or effectiveness is not recommended.

Charging Station Cabinet:

• Keep the charging station in a controlled indoor environment away from moisture, temperature extremes, flammable liquids and gasses, conductive

contaminants, dust and direct sunlight.

• Leave adequate space around the charging station for proper ventilation. Do not block, cover or insert objects into the charging station’s external

ventilation openings.

• The charging station is extremely heavy. Use caution when handling the charging station. Do not attempt to unpack it unassisted. Use a mechanical

device such as a forklift or pallet jack to move the charging station in the shipping container.

• Do not place containers of liquid or stack items on the cabinet.

• Inspect the shipping container and the charging station for shipping damage. Do not use the charging station if it is damaged.

• Use caution when cutting packing materials. The charging station could be scratched, causing damage not covered by the warranty.

• Save all packing materials for later use. Repacking and shipping the charging station cabinet or equipment without the original packing materials

may cause product damage that will void the warranty.

For Mobile Applications:

• The charging station comes with four pre-installed locking/swivel casters.

• Always use the included handle when moving the charging station (see section 4.1: Installing the Handle Bracket and Power Cord Manager for

more information).

• When moving the charging station cabinet, always push it from behind; never pull it toward you.

• A rolling charging station can cause personal injury and property damage if not properly supervised. If rolling the charging station down a ramp is

required, use extreme caution. Do not attempt to use ramps that have a slope grade greater than 12%.

DOOR CLOSEDDOOR CLOSED

/ "READY" / "READY"

START BUTTON

UV LIGHT

CYCLE “ON”

(10 min)

2. Overview

The hospital-grade charging station is an all-in-one solution for sanitizing, storing and charging for up to 32 devices.

The unit’s built-in ultraviolet lights help disinfect electronic devices at the touch of a button. The UV lights destroy most microbes on the devices

without the use of damaging heat, liquids or chemicals.

The surface of the charging station is protected by a patented antimicrobial coating with EPA-registered and FDA-compliant silver ionic technology. The

antimicrobial protection is 99.9% effective in inhibiting bacteria and viruses, such as C. diff and MRSA. The coating meets the requirements of

JIS Z 2801:2000, an international standard for evaluating efficacy in antimicrobial products.

With four pre-installed locking/swivel casters and an attachable, reversible handle accessory, the charging station is ideal for mobile applications.

To prevent theft and device tampering, your charging station enclosure comes equipped with locking steel doors.

3. Feature Identification

1 Locking Split Doors

2 Adjustable Storage Shelves (Holds up to 16 Devices per Shelf)

3 Blanking Panels (Removable)

4 Reversible Handle

5 Swivel/Locking Casters

6 Power Cord Manager

7 Power Cord Access Holes (1 Located on Each Side)

8 5-15P HG Hospital-Grade Input Plug with 10 ft. Cord

9 Padlock Hasp (Lock Not Included)

UV Lamps

Start Button and LED Status Indicators

Not Shown:

USB Charger/Hub Units

(In Interior of Unit)

Included Accessory Hardware

12 x Hex Screws

Hex Key

Produktspezifikationen

Marke:	Tripp Lite
Kategorie:	Handyladegerät
Modell:	CSC32USBWHG
Breite:	513.1 mm
Tiefe:	770.4 mm
Gewicht:	75000 g
Produktfarbe:	Weiß
Höhe:	931.7 mm
Energieschutzeigenschaften:	Überstrom
Platzierung:	Flur
Lenkrollen:	Ja
Sperren:	Ja
AC Eingangsspannung:	120 V
AC Eingangsfrequenz:	50 - 60 Hz
Verpackungsbreite:	599.9 mm
Verpackungstiefe:	855 mm
Verpackungshöhe:	1075.9 mm
Paketgewicht:	90650 g
Ursprungsland:	China
Typ:	Wagen zur Verwaltung tragbarer Geräte
Kabellänge:	3.05 m
Betriebsanleitung:	Ja
Gehäusematerial:	Stahl
Aufladequelle:	USB Typ-A
Anzahl Produkte pro Versandkarton:	1 Stück(e)
Gewicht Versandkarton:	90650 g
Länge des Versandkartons:	855 mm
Breite des Versandkartons:	599.9 mm
Höhe des Versandkartons:	1075.9 mm
Griff(e):	Ja
Ausgangsstrom:	80 A
Anzahl der Regale:	2 Regale
Maximale Bildschirmgröße:	- "
Schrauben enthalten:	Ja
Anzahl der unterstützten Geräte:	32
Schloss Art:	Key, Padlock
Slot-Breite:	38.2 mm
Slot-Höhe:	267.3 mm
Slot-Tiefe:	390.5 mm
Unterstützte tragbare Geräte:	E-book reader, Notebook, Smartphone, Tablet
Unterstützte Geräteanschlüsse:	30-pin, Lightning, Micro-USB, Mini-USB, USB
UV-C-LED-Desinfizierung:	Ja