Tripp Lite CSC16USB Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite CSC16USB (24 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/24
1
Table of Contents
1. Important Safety Instructions 2
2. Overview 2
3. Feature Identification 3
4. Setup 4
4.1 Adjusting Storage Shelf Dividers 4
4.2 Powering the USB Charger/Hub Unit 4
4.3 Door Locks 4
5. 16-Port USB Charger/Hub 5
5.1 USB Charger/Hub Features 5
5.2 Connecting Devices to the 5
USB Charger/Hub
5.3 Connecting a Computer to the 6
USB Charger/Hub
6. Wall Mounting 6
7. Desktop/Floor Placement 6
8. Specifications 7
9. Storage, Service and Cleaning 7
10. Optional Casters and Handle 7
11. Warranty and Product Registration 8
Español 9
Français 17
USB Charging Station
16-Port Models: CSC16USB (CSC16USBW)
Owners Manual
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2016 Tripp Lite. All trademarks are the sole property of their respective owners.
2
1. Important Safety Instructions
2. Overview
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that must be followed during the installation and operation of the product described in this manual.
Failure to comply may invalidate the warranty and cause property damage or personal injury.
USB Charger/Hub Unit:
To remove the USB Charger/Hub unit from the supply mains, the power cord serves as a disconnect device.
If any of the following situations arise, schedule an appointment with a service technician to have your equipment inspected:
The equipment has been exposed to moisture
The equipment has been dropped and damaged
The equipment shows obvious signs of breakage
The equipment is not functioning properly or is not functioning according to the instructions described in this Owner’s Manual
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support
equipment or to significantly affect its safety or effectiveness is not recommended.
Charging Station Cabinet:
Keep the charging station in a controlled indoor environment away from moisture, temperature extremes, flammable liquids and gasses, conductive
contaminants, dust and direct sunlight.
Leave adequate space around the charging station for proper ventilation. Do not block, cover or insert objects into the charging station’s external
ventilation openings.
The charging station is extremely heavy. Use caution when handling the charging station. Do not attempt to unpack or mount it unassisted. Use a
mechanical device such as a forklift or pallet jack to move the charging station in the shipping container.
Do not place containers of liquid or stack items on the cabinet.
Inspect the shipping container and the charging station for shipping damage. Do not use the charging station if it is damaged.
Use caution when cutting packing materials. The charging station could be scratched, causing damage not covered by the warranty.
Save all packing materials for later use. Repacking and shipping the charging station cabinet or equipment without the original packing materials
may cause product damage that will void the warranty.
For Wall-Mount and Desktop Installations:
Before mounting, first make sure that the wall surface can safely support the combined load of the charging station, equipment stored and all
attached hardware and components.
Always use suitable mounting means when installing to cinder block, concrete, drywall or wood studs.
For desktop installations, the mounting brackets that shipped with unit can also be used to secure the charging station to a desktop surface.
Your charging station is an all-in-one solution for storing, charging and syncing for up to 16 devices. Your charging station can be conveniently mounted
to walls, as well as used for stationary desktop or floor placement installations. To prevent theft and device tampering, your charging station enclosure
comes equipped with locking steel doors.
3
3. Feature Identification
CSC16USB(W)
1 Locking Split Doors
2 Adjustable Storage Shelves (Holds up to 16 Devices)
3 Blanking Panel (Removable)
4 Power Cord Access Holes (1 Located on Each Side)
5 Padlock Hasp (User Supplies Lock)
6 Cable Lock Routing Holes (User Supplies Lock)
7 Rear Panel with Keyhole Wall Mount Slots Section 5(See for More Information)
Not Shown:
USB Charger/Hub Unit
Power Cord
Keys
1
5
3
2
4
4
6
7
7


Produktspezifikationen

Marke: Tripp Lite
Kategorie: Nicht kategorisiert
Modell: CSC16USB
Ursprungsland: China
Anzahl Produkte pro Versandkarton: 1 Stück(e)
Gewicht Versandkarton: 50800 g
Länge des Versandkartons: 855 mm
Breite des Versandkartons: 599.9 mm
Höhe des Versandkartons: 623.1 mm

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tripp Lite CSC16USB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Tripp Lite

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-