Tripp Lite B150-1A1-DVI Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite B150-1A1-DVI (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
Owner’s Manual
DisplayPort to DVI over
Cat5 Extender Kit
Model: B150-1A1-DVI
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an ISOBAR6ULTRA
surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2015 TRIPP LITE. All rights reserved.
15-11-118-933506-EN.indd 1 11/13/2015 2:29:38 PM
2
Product Features
Package Includes
Optional Accessories
System Requirements
• Converts a DisplayPort video signal for use with a DVI display
• Extends a 1920 x 1080 (1080p) @ 60 Hz video signal up to 125 ft.
• Supports 24-bit True Color (8 bits per channel)
• Micro USB ports supply power to the transmitter and receiver units—
no external power supplies required
• Plug and play—no software or drivers required
• B150-1A1-DVI Transmitter Unit
• B150-1A1-DVI Receiver Unit
• Screwdriver for Equalization Adjustment
• (x2) Micro USB Cables – 3 ft.
• Owner’s Manual
• N202-Series Cat6 24 AWG Solid-Wire Patch Cables
• UR05C-Series USB Micro-B Charge-Only Cables
• U280-002-W12 2-Port USB Wall Charger
• UAC-1B 1-Port USB Wall Charger
• Computer with DisplayPort output port
• Display with DVI input port
15-11-118-933506-EN.indd 2 11/13/2015 2:29:38 PM
3
Installation
Note:
1. Test to make sure the entire installation works properly before pulling cables
through ceilings/walls.
2. To achieve maximum distance and performance, 24 AWG solid-wire Cat5e/6
cable must be used. The use of stranded-wire Cat5e/6 cable or cable with a
gauge size higher than 24 AWG will result in a shorter extension distance. All
TRIPP LITE N202-Series Cat6 cables are made with 24 AWG solid-wire cabling.
3. Make sure the power to all connected devices is turned off prior to installation.
14
3
24 AWG SOLID-WIRE
CAT5/6 CABLE
DISPL AYPORT
COMPUTER
DVI
DISPL AY
Up to 125 ft. at 1920 x 1080 (1080p) @ 60 Hz
25
1. Connect the transmitter unit’s built-in DisplayPort cable to the
computer’s DisplayPort output port.
2. Connect the included USB Micro-B cable to the transmitter unit and a
USB port on the computer or a USB wall outlet. The green and orange
LEDs on the transmitter unit’s RJ45 ports will illuminate to indicate it is
receiving power from the USB Micro-B cable.
3. Connect the RJ45 port on the transmitter to the RJ45 port on the
receiver using Cat5e/6 cable.
Note: See the installation diagrams for maximum extension distance and video
resolutions.
4.
Connect the receiver unit’s built-in DVI cable to a DVI monitor input port.
5. Connect the included USB Micro-B cable to the receiver unit and a
USB port on the display or a USB wall outlet. The green LED on the
receiver’s RJ45 port will illuminate to indicate it is receiving power from
the USB Micro-B cable.
15-11-118-933506-EN.indd 3 11/13/2015 2:29:39 PM


Produktspezifikationen

Marke: Tripp Lite
Kategorie: Nicht kategorisiert
Modell: B150-1A1-DVI

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tripp Lite B150-1A1-DVI benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Tripp Lite

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-