Tripp Lite B110-SP-CAT Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite B110-SP-CAT (24 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/24
1
Quick Start Guide
Digital Signage In-Line
HDBaseT & 10G Network
Surge Protector
Model: B110-SP-CAT
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright Š 2019 Tripp Lite. All rights reserved.
Español 7 • Français 13 • Русский 19
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
surge protector in our monthly drawing!
www.tripplite.com/warranty
2
Package Includes
Product Features
• B110-SP-CAT
• Grounding Wire, 12 in. / 305 mm
• Mounting Screws (x4)
• Screw Anchors (x4)
• Grounding Wire Screw
• Quick Start Guide
• Protects your network equipment’s inputs and outputs against electrostatic
discharge (ESD), lightning surges and cable discharge events
• Meets the following IEC regulations:
o IEC 61000-4-2 (ESD) +/- 15kV (Air), +/- 8kV (Contact)
o IEC 61000-4-5 (Lightning) 2kA (8/20Âľs), 6kV (8/20Âľs)
• Lightning protection reaction speed < 1 ns
• Solid-state silicon-avalanche technology
• Supports network data transmission speeds up to 10 Gbps
• Supports resolutions up 4K @ 60 Hz (HDBaseT)
• Easy in-line installation with integrated mounting ears
• Passive by design – no external power required
3
Installation
Note: The following instructions assume that two network devices are currently
connected together.
Single Device Protection:
1. Disconnect the installed patch cable from the device you wish to protect
and attach this cable to the “Cable End” of the In-Line HDBaseT & 10G
Network Surge Protector.
2. Using a Cat5/5e/6 patch cable (not included), connect the device to be
protected to the “Equipment End” of the In-Line HDBaseT & 10G Network
Surge Protector.
Note: For best protection performance, the patch cable between the “Equipment
End” of the In-Line HDBaseT & 10G Network Surge Protector and the equipment
to be protected should not exceed 300 ft. (90 m). Tripp Lite’s N001-Series Cat5e
Snagless Patch Cables are recommended.
3. Connect the ground wire to the In-Line HDBaseT & 10G Network Surge
Protector and then to earth ground.
NVR
Equipment End
Network Device
(Protected)
Network Source
(Unprotected)
In-Line HDBaseT
& 10G Network
Surge Protector
Cable End
PC


Produktspezifikationen

Marke: Tripp Lite
Kategorie: Nicht kategorisiert
Modell: B110-SP-CAT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tripp Lite B110-SP-CAT benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Tripp Lite

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-