Tripp Lite B055-001-SER Bedienungsanleitung

Tripp Lite Nicht kategorisiert B055-001-SER

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite B055-001-SER (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Quick Start Guide

Serial Adapter Cable

Model: B055-001-SER

The B055-001-SER Adapter Cable connects a serial device to the KVM switch.

Conﬁguration

To conﬁgure the B055-001-SER to interact with the connected device, you need to set

its serial parameters to match the parameters of the device:

Note: The B055-001-SER settings cannot be directly accessed from the Web Browser OSD. When in the Web

Browser OSD, you must access a connected computer/server, and then re-open the OSD using the GUI icon

You will then be able to access the B055-001-SER settings via the steps below. The Local Console and Non-

Browser OSDs allow you to directly access these settings.

1. In the Port Access page sidebar, select the port that the B055-001-SER is connected to.

2. Select the Port Conﬁguration tab on the menu bar.

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

All trademarks are the property of their respective owners.

WARRANTY REGISTRATION

ISOBAR® surge protector in our monthly drawing!

tripplite.com/warranty

Conﬁguration

3. In the Properties section, drop down each of the lists to select the port property values

that match the ones used by the connected serial console device. The port property

settings that the B055-001-SER support are listed in the following table:

Setting Meaning

Bits per

second

(Baud Rate)

This sets the port’s data transfer speed. Choices range from 300 to 38400 (drop down list shows

them all). Set the rate to match the Baud Rate setting of the serial console device. The default is

9600. If the Baud Rate is set to 9600, must be used. FLOW CONTROL Note: FLOW CONTROL

is not supported by all devices. For these devices, 9600 is the max supported Baud Rate.

Data Bits This sets the number of bits used to transmit one character of data. Choices are 7 or 8. Set this

to match the data bit setting of the serial console device. The default is 8 (this is the default for

the majority of serial console devices).

Parity This bit checks the integrity of the transmitted data. Choices are: None, Odd or Even.

Set this to match the parity setting of the serial console device. The default is Odd.

Stop Bits This indicates that a character has been transmitted. Set this to match the stop bit setting of the

serial console device. Choices are 1 or 2. The default is 1 (this is the default for the majority of

serial console devices).

Flow Control This allows you to choose how the data ﬂow will be controlled. Choices are None, Hardware and

XON/XOFF. Set this to match the ﬂow control setting of the serial console device. The default is None.

Access Mode This allows you to set the serial console device’s access mode. Choices are Share, Occupy and

Exclusive. The default is Share. (See the B064-Series manual for details on access modes.)

4. When you have ﬁnished making all of your selections, click Save.

Operation

To operate the device connected to the

port, simply double click the port in

the Port Access page. After you switch

to the port, issue the command that calls

up the device.

21-12-111 93-2934_revC

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

Warranty

Connector Pinout

WARRANTY REGISTRATION

Visit tripplite.com/warranty today to register the warranty for your

new Tripp Lite product. You’ll be automatically entered into a

drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited.

Some restrictions apply. See website for details.

Warning!

Use of this equipment in life support applications where failure of

this equipment can reasonably be expected to cause the failure

of the life support equipment or to signiﬁcantly affect its safety or

effectiveness is not recommended.

WEEE Compliance Information for Tripp Lite

Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE)

Directive and implementing regulations, when customers buy

new electrical and electronic equipment from Tripp Lite they are

entitled to:

• Send old equipment for recycling on a one-for-one, like-for-

like basis (this varies depending on the country)

• Send the new equipment back for recycling when this

ultimately becomes waste

Tripp Lite has a policy of continuous improvement. Speciﬁcations

are subject to change without notice. Photos and illustrations

may differ slightly from actual products.

Produktspezifikationen

Marke:	Tripp Lite
Kategorie:	Nicht kategorisiert
Modell:	B055-001-SER
Produktfarbe:	Schwarz
Verpackungsbreite:	129.5 mm
Verpackungstiefe:	124.5 mm
Verpackungshöhe:	43.2 mm
Paketgewicht:	180 g
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Warentarifnummer (HS):	8544.42.9090
Ursprungsland:	Taiwan
Anzahl Produkte pro Versandkarton:	20 Stück(e)
Gewicht Versandkarton:	4080 g
Länge des Versandkartons:	259.1 mm
Breite des Versandkartons:	269.2 mm
Höhe des Versandkartons:	223.5 mm
Hauptkarton GTIN (EAN/UPC):	10037332151480
Anschluss 1:	RJ45
Anschluss 2:	DB9
Steckerverbindergeschlecht:	Weiblich/Weiblich