TRENDnet TEW-734APO Bedienungsanleitung

TRENDnet Zugangspunkt TEW-734APO

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für TRENDnet TEW-734APO (18 Seiten) in der Kategorie Zugangspunkt. Dieser Bedienungsanleitung war für 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/18

TEW-734APO

TEW-734APO (V1) / 06.19.2015

Ÿ13 dBi Outdoor PoE Access Point

ŸQuick Installation Guide (1)

1. Before You Start

Minimum Requirements

ŸTEW-734APO

ŸCD-ROM (User's Guide)

ŸQuick Installation Guide

ŸMounting hardware

ŸPower adapter (24V DC, 1A)

ŸPoE injector

ŸGrounding wire

ŸComputer with an Ethernet port and Web Browser

ŸNetwork switch or router with an available network port

Ÿ2 x network cables

Note : The TEW-734APO does not support IEEE 802.3af. You must use the included

proprietary Power over Ethernet (PoE) injector.

Package Contents

2. Configuring a WDS connection

ŸThe default IP address of the TEW-734APO is 192.168.10.100. To configure the

unit, your network adapter must have an IP address within the 192.168.10.XX

range.

(192.168.10.1 – 192.168.10.254)

Please refer to the Appendix in the User's Guide for more information.

ŸAll antivirus and firewall software must be disabled before configuring the

TEW-734APO.

ŸThe initial configuration should be done in a testing environment, with two

TEW-734APO units approximately 15 ft. (5 meters) apart.

ŸConfigure and connect the devices before they are mounted.

1. Write the MAC address of the two TEW-734APOs. The MAC address can be

found on the label on the back of the unit.

Note:

TEW-734APO

Product Description: 13 dBi Outdoor PoE Access Point (5 Ghz)

IP Address: 192.168.10.100

Passwork: admin

FCC ID

Domain FCC H/W: 0.5

MAC: XXX XXXXXXXXX

SN: 1523H21ANU000985 MADE IN CHINA

2. Pinch the tab and slide the cover down.

3. Connect a network cable into the PoE port on the TEW-734APO.

4. Data & Power Out Connect the other end of the network cable to the port on the

included Power over Ethernet (PoE) Injector.

5. Using the second network cable, connect one end to the port of the PoE Data In

injector.

6. Connect the other end of the second network cable to your computer's network

port.

7. Connect the power cord to the PoE Injector, and plug the adapter into an electrical

outlet.

8. Assign a static IP address to your computer's network adapter, using the subnet

setting 192.168.10.XX (192.168.10.00 – 192.168.10.255). For this example we

will assign our computer with 192.168.10.30.

Note: The default IP address of the TEW-734APO is 192.168.10.100. Do not set

your computer's network adapter to this address.

9. Set the subnet mask to 255.255.255.0.

10. Open your web browser, and enter the IP address 192.168.10.100 into the

address bar to log into the TEW-734APO.

5 4

Produktspezifikationen

Marke:	TRENDnet
Kategorie:	Zugangspunkt
Modell:	TEW-734APO
Upgradefähige Firmware:	Ja
Breite:	205 mm
Tiefe:	64 mm
Gewicht:	800 g
AC-Netzadapter:	Nein
Internationale Schutzart (IP-Code):	IP55
Höhe:	61 mm
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Antennentyp:	Intern
Betriebstemperatur:	-20 - 70 °C
Netzstandard:	IEEE 802.1D, IEEE 802.11a, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3u, IEEE 802.11n, IEEE 802.3
Unterstützte Sicherheitsalgorithmen:	HTTPS, SSH
Quality of Service (QoS) Support:	Ja
Schnellstartübersicht:	Ja
Zertifizierung:	FCC, CE
Power over Ethernet (PoE):	Ja
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Stromverbrauch (max.):	12 W
Maximale Datenübertragungsrate:	300 Mbit/s
Ethernet LAN Datentransferraten:	10, 100 Mbit/s
2,4 GHz:	Nein
Antenne Zunahmeniveau (max):	13 dBi
LED-Anzeigen:	Ja
Frequenzband:	5 GHz
Web-basiertes Management:	Ja
VLAN-Unterstützung:	Ja
Management-Protokolle:	HTTPS, Telnet, SSH, SNMP v2/v3
Ausgangsstrom:	1 A
Ausgangsspannung:	24 V
Eingangsstrom:	0.6 A
MAC Adressen Filtern:	Ja
IP-Adressen Filter:	Ja
Reset-Knopf:	Ja
5 GHz:	Ja
Wi-Fi Datenrate (max):	300 Mbit/s
Modulation:	16-QAM, 64-QAM, QPSK, BPSK, OFDM