TP-Link TL-SF1005LP Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für TP-Link TL-SF1005LP (3 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
MODEL: TL-SF1005LP Datasheet
- With four PoE ports, transfers data and power on one single cable
- Working with IEEE 802.3af compliant PDs, expands your network
- Supports PoE Power up to 15.4 W for each PoE port
- Supports PoE Power up to 41 W for all PoE ports
- Plug and play, no conguration and installation required
- Up to 250 m data and power transmission under Extend Mode** specially designed for surveillance
system
- Priority Mode ensures high priority of port 1–2 to guarantee the quality of sensitive application
Highlights
5-Port 10/100Mbps
Desktop Switch with 4-Port PoE
Overview
TL-SF1005LP is a 5 10/100 Mbps ports unmanaged switch that requires no conguration and
provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE
802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along
with data in one single cable allowing you to expand your network to where there are no power lines or
outlets, where you wish to x devices such as APs, IP Cameras or IP Phones, etc.
Power Over Ethernet
Four of the 5 Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch support Power over
Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE
802.3af compliant Powered Devices (PDs).
Overload Arrangement
TL-SF1005LP has the priority function which will help protect the system when the system power is
overloaded. If all PoE PDs power consumption is >= 41 W, a priority will be arranged among the PoE
ports, then the system will cut o the power of the lowest-priority port.
Intelligent Power Management
Priority (port-1=port-2=port-3>port-4): This function will help to ensure the normal operation of the
system, it means Port 4 will be cut o when all total PoE PDs power consumption exceeds 41 W. For
example. If port 1, 2 and 4 are consuming 10 W respectively, and an additional PoE device with 15.4 W
is inserted to port 3, the system will cut o the power of port 4 to compensate for the overload.
TL-SF1005LP is easy to install and use. It requires no conguration and installation. With desktop and
wall mountable design, outstanding performance and quality, the TP-Link’s TL-SF1005LP 5-Port
10/100 Mbps Desktop Switch with 4-Port PoE is an ideal choice for expanding your network.
Easy of Use
Highlight Performance
Up to 250 m PoE power supply and data transmission under Extend Mode**.
Priority Mode ensures high priority of port 1–2 to guarantee the quality of sensitive application.
Specications
www.tp-link.com
Specications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or
registered trademarks of their respective holders. Copyright ©2020 TP-Link Technologies Co., Ltd. All rights reserved.
Note:
* PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a
result of client limitations and environmental factors.
**The speed of the ports which are under extend mode will be downgraded to 10 Mbps. Actual transmission distance may
vary from the quality of the cables.
Product Picture
Model TL-SF1005LP
Standards IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af
Interface 5*10/100 Mbps Ports with 4 PoE Ports(Port 1 to Port 4)RJ45
AUT otiation/O Neg AUTO MDI/MDIX
Network Media
10B SE-T: UTP category 3, 4, 5 cable (maximum 100 m)A
EI /TIA A-568 100 Ω STP (maximum 100 m)
100 SE-TX: UTP category 5, 5e cable (maximum 100 m)BA
EI /TIA A-568 100 Ω STP (maximum 100 m)
PoE Ports (RJ45)
Standard: 802.3 af compliant
PoE Ports: Port1- Port4
Power Supply: 41 W
Transmission Method Store-And-Forward
Swit ty 1 Gbpsching Capaci
Mac ddress Table 2KA
Fan Quantity Fanless
Extend Mode Yes
Priority Mode Yes
Max Power onsumptionC1.9 W (220 V/50 Hz. no PD connected)
47 W (220 V/50 Hz. with 41 W PD connected)
Max Heat Dissipation 6.48 BTU/h (no PD connected)
160.27 BTU/h (with 41 W PD connected)
External P er Supply External P er dapter (ow ow A Output: 53.5 VDC / 0.81 A)
LED Power, Link/Act, PoE Status, PoE Max
Dimensions ( W x D x H ) 3.9 x 3.9 x 1.0 in. (99.8 x 98 x 25 mm)
FCC, C RE, oHS
Package ontents TL-SF1005LP, PCower dapter, Installation GuideA
Environment
Operating Temperature F): 0 °C~40 °C (32 °F~104 °
Storage Temperature F): -40 °C~70 °C (-40 °F~158 °
Operating Humidity -condensing: 10% ~ 90% RH, non
Storage Humidity -condensing: 5%~90% RH, non


Produktspezifikationen

Marke: TP-Link
Kategorie: Nicht kategorisiert
Modell: TL-SF1005LP

Brauchst du Hilfe?

Wenn Sie Hilfe mit TP-Link TL-SF1005LP benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert TP-Link

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-