TP-Link RE815XE Bedienungsanleitung

TP-Link Nicht kategorisiert RE815XE

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für TP-Link RE815XE (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

7106509576 REV1.0.0

Plug the extender into a power outlet your router. Wait until next to

its Power LED turns solid on.

Note: For safety, only plug the extender in the direction as shown below.

Power On

Quick Installation Guide

Range Extender

Next to

Relocate

Set Up

1. Plug in the extender about between your router and the Wi-Fi dead halfway

zone. The location you choose must be within the range of your router.

2. Wait for about 2 minutes until the LED turns . If it doesn't, solid blue

relocate the extender closer to the router to achieve better signal quality.

Enjoy!

Connect your devices to the extender wirelessly or via an Ethernet cable,

then enjoy the internet. The passwords of your extended networks are

the same as your host router.

Tip: You can also set up the extender in Access Point mode to transform your existing wired

network to a wireless one. For details, refer to the user guide at https://www.tp-link.com/support.

Router Devices

Halfway

Blue: Suitable location

Red: Too far from router

Via the Tether App

1. Get the up-to-date Tether app from the

Apple App Store or Google Play, or simply

scan the QR code.

Note: If the LED does not turn solid on, please

refer to > .FAQ Q2

2. Launch the Tether app and log in with your

TP-Link ID. If you don’t have an account,

create one first.

Welcome to Tether

TP-Link ID (Email)

Password

3. Tap the button and select .Range Extender

Tether

Scan for Tether

Note: If you cannot find your device, please refer to

FAQ > .Q1

For more details, please refer to the user guide at

https://www.tp-link.com/support/download.

More Setup Methods

1. Connect your computer or smartphone to

the extender’s network TP-Link_Extender.

2. Visit http://www.tplinkrepeater.net or

http://192.168.0.254 in a web browser.

Create a password to log in.

3. Follow web instructions to complete the setup.

Via a Web Browser

Extended Network Names:

Router’s network name with

EXT

at the end

Same as your OneMesh router

(See back for OneMesh details)

Passwords:

Same as your router

4. Follow app instructions to complete the setup.

The LED should turn solid on, indicating

successful connection to your router.

2. Within 2 minutes, press the WPS button on the

extender for 1 second. The LED should

change from blinking to solid on, indicating

successful connection.

1. Press the WPS button on your router.

Via the WPS Button

Note: WPA3 required for 6 GHz bands does not allow WPS

connection. To connect to a router’s 6 GHz band, please

connect via the Tether app or web browser.

Setup with videos

Scan the QR code, or visit

https://www.tp-link.com/support/setup-video/#range-extenders

and search for the setup video of your model.

Solid On

* Images may differ from your actual product.

Tip: To place the extender for optimal Wi-Fi performance, access extender settings

via the Tether app and go to Tools Location Assistant> , or simply scan the QR code

to visit https://www.tp-link.com/support/faq/3103/.

My Devices

No devices found.

Choose Your Device Type

Wireless Router

Gaming Router

Range Extender

TP-Link OneMesh router and extenders work together to form one unied Wi-Fi

network. Walk through your home and stay connected with the fastest possible

speeds thanks to OneMesh’s seamless coverage.

OneMeshTM with Seamless Roaming

Seamless Roaming

Devices automatically switch between your router and extenders as you move through your

home for the fastest possible speeds.

Unied Wi-Fi Network

Router and extenders share the same wireless settings, including network name, password,

access control settings and more.

Easy Setup and Management

Set up a OneMesh network with a push of WPS buttons. Manage all network devices on the

Tether app or at your router’s web management page.

To check full list of TP-Link OneMesh devices, scan the QR code,

or visit https://www.tp-link.com/onemesh/compatibility.

LED Explanation

LED Status Indication (For Range Extender Mode)

The extender is connected or not connected to the 5 GHz

wireless network of your router.

The extender is connected or not connected to the 6 GHz

wireless network of your router.

6 GHz

On/O

5 GHz

On/O

The extender is connected or not connected to the 2.4 GHz

wireless network of your router.

2.4 GHz

On/O

The extender is on or o.

The system is starting up or rmware upgrade is in progress.

On/O

Blinking

The extender is connected to your router’s wireless

network and is in a suitable location.

The extender is receiving a weak signal. Try relocating it

closer to your router.

WPS connection is in progress.

No wireless connection is established.

Solid blue

Solid red

Blinking

O

(Power)

(Signal)

INTER N ET

SAME

Network Name & Password

for seamless roaming

Method 2: Via a Web Browser

1. Connect your computer or smartphone to the extender’s network

If you are

using a computer, unplug the Ethernet cable if any.

2. Launch a web browser, enter http://www.tplinkrepeater.net in the address

bar, and log in.

3. View or change extender settings as needed.

Method 1: Via the Tether App

1. Connect your smartphone to the extender‘s or router’s network.

2. Launch the Tether app, select your extender, and log in.

3. View or change extender settings as needed.

Access Extender Settings

After setup, you can access extender settings via any of the methods below.

You can reselect host network, change extended network settings and more.

Note: If your extender and router use the same network name, is recommended.Method 1

Wi-Fi

TP-Link_Extender

CHOOSE A NETWORK...

< Settings

My Devices

Local Device

RExxx

XX-XX-XX-XX-XX-XX

Q1. What should I do if the Tether app cannot nd my device during

setup?

Try another method by following the steps below:

1. Connect your smartphone to the extender’s network .TP-Link_Extender

2. Launch the Tether app, and select your extender.

3. Follow app instructions to complete the setup.

If you are still having problems, contact our technical support.

Q2. What should I do if the LED doesn’t turn solid on after

completing setup via the Tether app or web browser?

You may have entered incorrect Wi-Fi password for your host router during the

conguration. Check the password and try again.

Make sure the extender is close to your router, preferably within 16 feet, and away

from large electrical appliances.

If you have enabled wireless MAC ltering, wireless access control, or access

control list (ACL) on your router, disable them rst, then follow any method on the

front page to complete the conguration.

Try setting it up via the WPS button.

Reset the extender and go through the conguration again.

If you are still having problems, contact our technical support.

Q3. How do I reset the extender?

With the extender powered on, use a pin to press the Reset button for 1 second.

The extender will reboot.

For technical support, replacement services, user manuals and other information,

please visit https://www.tp-link.com/support, or simply scan the QR code.

If you have any suggestions or needs for our product guides, you are welcome to

email techwriter@tp-link.com.cn.

To communicate with TP-Link users or engineers, please join the TP-Link Community

at https://community.tp-link.com.

Reset

Tip: If you have connected to the extender’s Wi-Fi but still cannot nd your device, try turning o

your cellular data.

Safety Information

• Keep the device away from water, re, humidity or hot environments.

• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

• Do not use the device where wireless devices are not allowed.

• The socket-outlet shall be installed near the equipment and shall be easily accessible.

This device is restricted to indoor use only.

The operation of this device is prohibited on oil platforms, cars, trans, boats, and aircraft, except that

operation of this device is permitted in large aircraft while ying above 10000 feet. Operation of

transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned

aircraft systems.

TP-Link hereby declares that the device is in compliance with the essential requirements and other

relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863.

The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce

TP-Link hereby declares that the device is in compliance with the essential requirements and other

relevant provisions of the Radio Equipment Regulations 2017.

The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca

If you need more setup help, please visit

https://www.tp-link.com/support/faq/3074/, or simply scan the QR code.

AXE5400 Tri-Band Wi-Fi 6E Range Extender Model: RE815XE

Produktspezifikationen

Marke:	TP-Link
Kategorie:	Nicht kategorisiert
Modell:	RE815XE
WLAN-Standards:	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax)
Breite:	106.6 mm
Tiefe:	39.7 mm
Produkttyp:	Mesh-Satellit
Produktfarbe:	Weiß
Höhe:	348.2 mm
Antennentyp:	Extern
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Netzstandard:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Unterstützte Sicherheitsalgorithmen:	64-bit WEP, 128-bit WEP, WPA, WPA3
Zertifizierung:	CE, RoHS
Stromverbrauch (Standardbetrieb):	23 W
Netzteil Eingansgsspannung:	100 - 240 V
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Anzahl der Antennen:	4
Temperaturbereich bei Lagerung:	-40 - 70 °C
Luftfeuchtigkeit bei Lagerung:	5 - 90 %
Netzteilfrequenz:	50 - 60 Hz
Anzahl enthaltener Produkte:	1 Stück(e)
Top WLAN-Standard:	Wi-Fi 6 (802.11ax)
Nachhaltigkeitszertifikate:	Federal Communications Commission (FCC), RoHS
WLAN-Band:	Tri-Band (2,4 GHz/5 GHz/6 GHz)
WLAN Datentransferrate (max.):	2402 Mbit/s
WLAN-Datenübertragungsrate (erstes Band):	574 Mbit/s
WLAN-Datenübertragungsrate (zweites Band):	2402 Mbit/s
Reset-Knopf:	Ja
WLAN- Datenübertragungsrate (Terzband):	2402 Mbit/s
Ethernet-Kabel:	Ja