TP-Link Omada DS105GE Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für TP-Link Omada DS105GE (5 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
Wall Mounting Guide
Wall Mountable Switches
© 2023 TP-Link 1910013579 REV1.0.0
1.1 Wall Mounting Preparation
Before mounting the switch, you need to prepare the tools below:
Ç´A screw driver.
Ç´Two screws which complies to the corresponding standard. For details, see Wall
Mounting Specification.
1.2 Wall Mounting Procedure
On the bottom of the panel, there are two mounting holes. You need to drive two screws
into the wall, then mount the switch on the wall. Note that the switch should be mounted
on the wall upright rather than sideways. For TL-SF1008P/TL-SF1008LP/TL-SF1009P/
TL-SG1008P, the switch should be mounted with the ports facing downward and the
LEDs facing upward.
1) Determine the location on the wall where you want to mount the switch.
2) Mark the wall where the two mounting holes are. The distance between the two marks
must be the same as that between the two mounting holes of the switch. For the wall-
mounting-holes distance, see .Wall Mounting Specification
3) Drive the screws into the wall at the marks using the screw driver. For the Screw-
Head-to-Wall Minimum Distance, see .Wall Mounting Specification
4) Mount the switch on the wall.
1.3 Wall Mounting Specification
Model
Screw Standard of
ANSI B1.1
Minimum Length
of Screw
Screw-Head-to-Wall
Minimum Distance
Wall-Mounting-Holes
Distance
DS105G 4#, (5#), 6#, 8# .57 mm 1.5mm mm39
DS105GE 4#, (5#), 6# 7.5mm 1.5mm mm52
DS105G-M2 4#, (5#), 6# 7.5mm 1.5mm mm52
DS105GP 4#, (5#), 6#, 8# 8.5mm 1.5mm mm39
DS105X 4#, (5#), 6# .5mm 1.5mm7 150mm
DS106GPP 4#, (5#), 6#, 8# 8.5mm 1.5mm mm94
DS106P 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm
DS108G 4#, (5#), 6#, 8# .5mm 1.5mm7 94mm
DS108GE 4#, (5#), 6# .5mm 1.5mm 1 mm7 10
DS108G-M2 4#, (5#), 6# .5mm 1.5mm 1 mm7 10
DS108GP 4#, (5#), 6#, 8# 8.5mm 1.5mm mm94
DS110GMP 4#, (5#), 6# 8.5mm 1.5mm 150mm
Model Screw Standard of
ANSI B1.1
Minimum Length
of Screw
Screw-Head-to-Wall
Minimum Distance
Wall-Mounting-Holes
Distance
DS111P 4#, (5#), 6# 8.5mm 1.5mm 150mm
DS116GE 4#, (5#), 6# 8.5mm 1.5mm 200mm
ES205G 4#, (5#), 6# 11mm 4.5mm 52mm
ES205GP 4# 10mm 4.5mm 39mm
ES210GP 4#, (5#), 6# 8.5mm 1.5mm 150mm
LS1005G 4#, (5#), 6# 8.5mm 2.5mm 38mm
LS1008G 4#, (5#), 6# 8.5mm 2.5mm 48mm
LS105G 4#, (5#), 6# 7.5mm 1.5mm 76mm
LS105GP 4#, (5#), 6# 7.5mm 1.5mm 65mm
LS105LP 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm
LS106LP 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm
LS108G 4#, (5#), 6# 7.5mm 1.5mm 65mm
LS108GP 4#, (5#), 6# 7.5mm 1.5mm 65mm
LS109P 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm
LS1210GP 4#, (5#), 6# 7.5mm 1.5mm 150mm
S4500-16GP 4#, (5#), 6# 8.5mm 1.5mm 200mm
S4500-8G 4#, (5#), 6# 8.5mm 1.5mm 150mm
S4500-8GP 4#, (5#), 6# 8.5mm 1.5mm 150mm
S4500-8GP2F 4#, (5#), 6# 8.5mm 1.5mm 150mm
SG2008 4#, (5#), 6# 8.5mm 1.5mm 150mm
SG2008P 4#, (5#), 6# 8.5mm 1.5mm 150mm
SG2016P 4#, (5#), 6# 8.5mm 1.5mm 200mm
SG2210P 4#, (5#), 6# 8.5mm 1.5mm 150mm
SG2210XMP-M2 4#, (5#), 6# 8.5mm 1.5mm 150mm
T1500G-8T 4#, (5#), 6# 8.5mm 1.5mm 150mm
TL-RP108GE 4#, (5#), 6# 8.5mm 1.5mm 65mm
TL-SF1005LP 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm
TL-SF1005P 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm
TL-SF1006P 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm
TL-SF1008LP 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm
TL-SF1008P 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm


Produktspezifikationen

Marke: TP-Link
Kategorie: Nicht kategorisiert
Modell: Omada DS105GE

Brauchst du Hilfe?

Wenn Sie Hilfe mit TP-Link Omada DS105GE benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert TP-Link

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-