TP-Link KE100 Bedienungsanleitung

TP-Link Thermostat KE100

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für TP-Link KE100 (3 Seiten) in der Kategorie Thermostat. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

Smart Thermostatic Radiator Valve

Quick Start Guide

Install Guide:

Scan QR code or visit

https://www.tp-link.com/support/faq/3404/

1. Set up a Kasa smart hub in the Kasa Smart app if you

haven’t already done so. You can get the app Kasa Smart

from the App Store or Google Play.

If you want to remotely control / manage the valve, you need to add a Kasa smart hub rst. You can adjust temperature manually.

After inserting the batteries, the valve is ready to use.

Rotate the valve to increase / decrease temperature.

2. Use the provided cover-opener to press and hold the

SYNC/RESET button for 5 seconds to reset the valve.

3. Smart Open the Kasa Smart app, tap + and select

Thermostats. Follow the app instructions to pair the valve

and complete setup.

There are two types of valves: and .Thermostatic Manual

Kasa Smart Thermostatic Radiator Valve is only compatible with the thermostatic valve.

If your connector is , you can screw the new valve onto the radiator directly. M30 x 1.5

If not, check whether one of the provided adapters ts the connector. If your none of them t your

connector, please purchase a proper one yourself.

Thermostatic Valve Manual Valve

1. 2. Check existing valve type Check the connector type

01 / Check Compatibility

03 / Install the Valve

04 / Set Up the Valve After Install Don’t Have a Hub?

1. Install the valve rst before powering it up.

2. No need to shut o water before changing the radiator

valve. Water will not leak.

3. Avoid installing the valve in the same room where you

have installed the boiler thermostat.

4. Install the valve within range of your Kasa smart hub if you

wish to control it using the Kasa Smart app.

02 / Install Requirements

1. Unscrew the existing valve. Read the following instructions rst before installing

the new valve:

2. Screw the new valve directly (for M30 x 1.5 connector) or after installing

the proper adapter (for non-M30 x 1.5 connectors). The ▲ at the bottom

of the valve indicates the position of the display.

4. Open the battery cover and insert two AA LR6 Alkaline

batteries. Make sure the positive and negative

terminals face the correct direction.

3. Remove the cover of the valve by rotating

counterclockwise using the provided cover-opener.

*Do NOT use rechargeable batteries or 1.2V AA batteries.

M30 x 1.5

RAVL Adapter

RAV Adapter

RA Adapter

30mm

1.5mm

Vertical InstallationHorizontal Installation

SYNC/RESET

*Images may dier from your actual product.

Frequently Asked Questions (FAQ)

Q1. What should I do if the display shows ?

Q3. Why CAN’T I control my radiator valve?

Q4. Can the radiator valve continue to work if there

is no wireless connection or no internet access?

Check if the valve is installed properly.

Rotate the valve, and then the valve will calibrate

automatically.

TP-Link hereby declares that the device is in compliance with the essential

requirements and other relevant provisions of directives 2014/53/EU,

2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at

https://www.tp-link.com/en/support/ce/

TP-Link hereby declares that the device is in compliance with the essential

requirements and other relevant provisions of the Radio Equipment Regulations

2017.

The original UK declaration of conformity may be found at

https://www.tp-link.com/support/ukca/

Safety Information

• Keep the device away from water, re, humidity or hot environments.

• Do not attempt to disassemble, repair, or modify the device. If you need

service, please contact us.

• Do not use the device where wireless devices are not allowed.

• Please read and follow the above safety information when operating the

device.

• We cannot guarantee that no accidents or damage will occur due to improper

use of the device. Please use this product with care and operate at your own

risk.

• Do not ingest battery, Chemical Burn Hazard

• Keep new and used batteries away from children.

CAUTION!

• Avoid replacement of a battery with an incorrect type that can defeat a

safeguard.

• Avoid disposal of a battery into re or a hot oven, or mechanically crushing or

cutting of a battery, that can result in an explosion.

• Do not leave a battery in an extremely high temperature surrounding

environment that can result in an explosion or the leakage of ammable liquid

or gas; Do not leave a battery subjected to extremely low air pressure that may

result in an explosion or the leakage of ammable liquid or gas.

Wireless:

Operating Frequency / Nominal Operating Frequency / Max Output Power:

863~865MHz / 863.35MHz / 25mW(e.r.p)

863~865MHz / 864.35MHz / 25mW(e.r.p)

868~868.6MHz / 868.35MHz / 25mW(e.r.p)

Need some help?

Visit www.tp-link.com/support

for technical support, user guides, FAQs,

warranty & more

Check if the connector is M30 x 1.5. If not, choose a

proper adapter.

If the display shows or , please refer to . Q1/Q2

If the display shows , then the battery power is

running low and the valve can’t work properly. Please

replace the batteries.

You can still manage the valve in the Kasa Smart app

as long as your phone is connected to the same Wi-Fi

network as the valve.

Manual control still works. You can rotate the control

knob to adjust temperature.

The schedules you have set will still activate as long

as the connected hub works properly.

Q5. How can I reset the radiator valve?

Remove the cover of the valve, then use the

cover-opener to press and hold the SYNC/RESET

button for at least 5 seconds to reset the valve.

Open the Kasa Smart app, then remove the valve on

the page or in . The valve will Home Device Settings

reset automatically.

Refer to to reset the valve and set it up again. Q5

Q2. What should I do if the display shows ?

Re-install the old valve head and open/close it multiple

times to improve the pin’s movement. Then, restart

and remount the new valve.

The valve might be blocked by calcification. Use a

spanner or a similar tool to move the pin in and out to

unblock the valve.

Replace the batteries.

LED

Temperature

Event

Valve blocked by calcification

*You can rotate the LED displa in the Kasa Smart app.y 180 °

Starting up

Calibrating

Frost protection

Low battery:

Valve can’t work properly

Sleep mode

Child lock enabled

No valve detected or valve

not compatible

LED Status

Displaying

Moving light, then displaying normal temperature

Blinking twice, then blinking , finally displaying normal temperature

Switching between and the normal temperature

Displaying

LED Explanations

Button Operation Result

Control

Knob

SYNC/

RESET

Rotate clockwise

Rotate counterclockwise

Rotate with no shown

display

Lower temperature.

Restore to factory default

settings, and enter pairing

mode.

Activate the display. Then

you can rotate to adjust

the temperature.

Raise temperature.

Press and hold for

5 seconds

Button Explanations

LED

Wireless

Schedule

Heating

LED Status

Blinking fast

Solid on

LED is off

Blinking

Solid on

Battery

Event

Pairing;

Device resetting

Pairing complete

Blinking slowly Ready to be paired;

Offline

Adjust temperature

based on your schedule

Raise temperature

Keep/lower temperature

Low battery

Sufficient battery

power

LEDs:

Temperature

Appearance

Heating BatteryWireless Schedule

SYNC/RESET

Control Knob

Indicates the position of the display

!Battery Instructions

Compatible Batteries:

Battery Type Battery Voltage Work Temp.

AA LR6 alkaline battery 1.5V 0 -40℃ ℃

Note: Do NOT use rechargeable batteries or 1.2V AA

batteries.

Produktspezifikationen

Marke:	TP-Link
Kategorie:	Thermostat
Modell:	KE100
Display-Typ:	LED
Unterstützte mobile Betriebssysteme:	Android 10, Android 10.0, Android 11.0, Android 12.0, Android 5.0, Android 5.1, Android 6.0, Android 7.0, Android 7.1, Android 7.1.2, Android 8.0, Android 9.0, iOS 10.0, iOS 11.0, iOS 11.4, iOS 12, iOS 13, iOS 13.4, iOS 14, iOS 14.5, iOS 15
Produktfarbe:	Weiß
Steuerung:	Drehregler
Akku-/Batterietyp:	AA
Höhe:	84 mm
Material:	Polycarbonat
Eingebautes Display:	Ja
Betriebstemperatur:	0 - 40 °C
Programmierbar:	Ja
Betriebsanleitung:	Ja
Verpackungsart:	Box
Kindersicherung:	Ja
Anzahl unterstützter Akkus/Batterien:	2
Akku-/Batteriespannung:	1.5 V
Fernbedienung:	Ja
Anzahl enthaltener Produkte:	1 Stück(e)
Funktioniert mit Google Assistant:	Ja
Funktioniert mit Amazon Alexa:	Ja
Smartphone Fernsteuerung:	Ja
Durchmesser:	56.5 mm
Akkus/Batterien enthalten:	Ja
Nachhaltigkeitszertifikate:	CE, RoHS, UKCA
Funkfrequenz:	868 MHz
Für die Nutzung im Innenbereich geeignet:	Ja
Intelligentes Thermostat:	Ja
Drahtlose Verbindung:	Ja
Batterien erforderlich:	Ja
Einfache Installation:	Ja
Schraubengewinde:	M30 x 1.5mm