Totolink X6100UA Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Totolink X6100UA (2 Seiten) in der Kategorie Netzwerkkarte/Adapter. Dieser Bedienungsanleitung war fĂĽr 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Quick Installation Guide
AX1800 Dual Band Wireless USB Card
Model: X6100UA
Information in this docutment is subject to change without prior notice.
Copyrights TOTOLINK All rights reserved. Website: http://www.totolink.net
Double-click the CD drive letter,
choose the corresponding model
with correct system type, then
click “Install”.
Remove disks from drives, and then click “Finish” to complete
setup. The computer will restart soon.
If you want to restart your computer later, select the second
item and click “Finish”.
Manufacturer: ZIONCOM ELECTRONICS (SHENZHEN) LTD.
Address: Room 702, Unit D, 4 Building Shenzhen Software Industry Base, Xuefu Road, Nanshan District, Shenzhen, Guangdong, China
Put into the CD.
Waiting for the installation.
PC
802.11ax WLAN Adapter
Please insert the USB Card to your computer’s USB interface, then install
the driver.
1. Connect the USB Card to the computer
2. Install the Driver to Your Computer
Please turn off the firewall and anti-virus
software temporarily when installing the driver.
Method 1: Install the driver using a disk (If your computer does not
have drives, please use Method 2 to install the driver).
X6100UA
X6100UA
12
3
4
Method 2: Download the driver from the website
X6100UA_Windows 10_8_8.1_7 Driver
X6100UA_Windows 10_8_8.1_7 Driver
X6100UA_Windows 10_8_8.1_7 Driver
X6100UA
X6100UA_Datasheet
X6100UA_QIG
X6100UA_Driver
1.Open a computer browser and enter: in the address http://totolink.net
bar, enter the model: X6100UA in the search bar at the upper right corner,
and then click the search symbol to search.In the search results page, click
the USB card picture to enter the page of details.
2. Enter the download page as shown below, click the download symbol
corresponding to the driver file, and then download the USB card driver.
3. After unzipping the file, double-click to open the setup file: , wait for a moment, and click "Finish".Setup.exe
3. Connect to Wireless Router (For Windows 10)
Enter password of the
Wi-Fi.(P4)
4
Search for 2.4GHz or 5GHz
Wi-Fi SSID.(P2)
2
Wi-Fi connected
successfully.(P5)
5
Choose your Router’s
SSID, click Connect.
(P3)
3
(P5)(P2) (P3) (P4)
1Click the bottom on the
lower right of your PC.
FCC warning
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This equipment should be installed and operated with minimum distance
20cm between the radiator& your body.
4. FAQs
1. Why after installing USB card and driver, the lower right corner of
computer still prompt USB card does not exist?
It is possible that the computer did not recognize your USB card, please
change the USB interface and try it again. Another possibility is the USB
card was blocked by the anti-virus software during the process of installing
the driver. It is recommended to close the firewall and anti-virus software
temporarily when installing the driver, and open it after the driver is
installed.
2. After inserting the wireless network card to install the driver, the
icon is displayed, the network cannot be connected, and the
network is unavailable.
Right-click the open icon , select "Open and Network Sharing
Center", open "Change Adapter Settings" in the upper-left corner of
the page, and confirm that the wireless network card adapter is on.
If it is closed, select the corresponding network card and right-click
"Enable".
3. How to place the antenna to get the best wireless signal?
For the best Internet experience, keep the NIC antenna perpendicular
to the horizontal plane.


Produktspezifikationen

Marke: Totolink
Kategorie: Netzwerkkarte/Adapter
Modell: X6100UA

Brauchst du Hilfe?

Wenn Sie Hilfe mit Totolink X6100UA benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Netzwerkkarte/Adapter Totolink

Bedienungsanleitung Netzwerkkarte/Adapter

Neueste Bedienungsanleitung fĂĽr -Kategorien-