Topcom Twintalker 6000 Bedienungsanleitung
Lesen Sie kostenlos die š deutsche Bedienungsanleitung fĆ¼r Topcom Twintalker 6000 (24 Seiten) in der Kategorie Babyphone. Dieser Bedienungsanleitung war fĆ¼r 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/24
TwinTalker 6000
User Guide
1
2
11
9
4
10
6
3
7
12
8
5
U8006155/1
1. DESCRIPTION
(see front cover)
2. INSTALLATION
2.1. Removing/Installing the Belt Clip
1. To remove the clip from the unit, push up on the belt clip (2) while pulling
the clip tab (1).
2. When re-installing the belt clip, a click indicates the BeltClip is locked into
position.
2.2. Battery Installation
1. Remove the belt clip (2).
2. Pull the Battery Cover Tab (4) and remove the Battery Cover (3).
3. Install the battery Pack.
Ensure the metal contacts on the site of the battery are facing outwards from
the radio to connect with the contact on the battery door.
4. Re-install the Battery Cover (3) and Belt Clip (2).
Note: Instead of the supplied battery pack, the TT6000 can be used with
3xAAA standard rechargeable batteries. Follow the polarity as shown when
installing. You are not able to use the desktop charger with standard recharge-
able AAA batteries installed
Important :
Dispose of the batteries at a designated battery disposal unit and not in
the household waste.
Remove the batteries when you do not use your radio for a longer period.
Do not try to diassemble the battery pack.
Do not shortcircuit & dispose of in ļ¬re.
1. Microphone
2. Monitor button
3. Talk button
4. Call button
5. Ear/mic/connector
6. Antenna
7. LCD display
8. Up/Down button
9. Menu/Lock button
10.On/Off button
11.Scan button
12.Speaker
2
4
3
1
2.3. Desktop charger
The desktop charger provides drop-in charging conveniency
1. Put the desktop charger on a ļ¬at surface.
2. Plug one end of the supplied adapter into the electric socket and the other
end into the connector on the backside of the desktop charger.
3. Put the radio in the charger as indicated.
4. The charging LED will turn on if itās properly inserted and charging.
5. It will take about 8 to 10 hours to fully charge the batteries
3. LCD SCREEN
a. RX icon. Displayed when receiving a signal.
b. TX icon. Displayed when transmitting a signal.
c. Displays the current VOLUME LEVEL.
d. CTCSS code. Changes from 1 to 38 as
selected by user.
e. Displayed during the CHANNEL SCAN mode.
f. Displays during the VOX mode.
g. Button lock symbol
h. The current battery level charge.
i. Channel number. Changes from 1-8 as
selected by user.
4. GETTING STARTED
4.1. Turning the Unit ON/OFF
To activate; press and hold the POWER button . The unit will ābeepā and the
LCD Screen will display the current channel.
To switch off; press and hold the POWER button again. The unit will ābeepā
and the LCD Screen will turn blank.
hgec
f
b
id a
4.2. Adjusting Speaker Volume.
The Speaker Volume can be adjusted using the up /down key . The
Speaker Volume level is displayed on the LCD(see Ā§3)
4.3. Receiving a Signal
The unit is continuously in the RECEIVE mode when the unit is ON and not
transmitting. When you receive a signal on the current channel, the RX icon is
displayed (see Ā§3)
4.4. Transmitting a Signal
1. Press and hold the TALK button to TRANSMIT. The TX icon will be
displayed
2. Hold the unit in a vertical position with the MICROPHONE 5 cm from the
mouth and speak into the microphone.
3. Release the TALK button when you have ļ¬nished transmitting.
NOTE: To check the channel activity; press and hold the MONITOR button.
Youāll hear static if the channel is unoccupied. Donāt TRANSMIT if someone is
talking on the channel.
IMPORTANT: In order for other people to receive your transmission, they must
also be on the same channel and have set the CTCSS code you are currently
using. Refer to the āChanging Channelsā
5. OPERATION
5.1. Changing Channels
The PMRS has 8 available channels.
To change channels:
1. Press the MENU button once, the current channel number ļ¬ashes on
the LCD Screen.
2. Press the UP or DOWN button to change the channel.
3. Press the MENU button to conļ¬rm the channel selection and go to
CTCSS SUB-CHANNEL SELECTION mode, or press the TALK button to
select the desired channel and return to NORMAL mode.
5.2. CTCSS (Continuous Tone Coded Squelch System)
The 2 digit CTCSS code corresponds to a speciļ¬c tone frequency the radio
emits. Two users, with the same channel and CTCSS set can hear one
another.They will not
be able to hear anyone else on the channel unless the
other radios have the same exact CTCSS code enabled.
The Twintalker 6000 has 38 CTCSS codes available.
1. Press the MENU button twice, the CTCSS code will ļ¬ash
2. Press the UP or DOWN button to move to another code.
3. Press the TALK button to conļ¬rm your selection and return to the NORMAL
mode.
4. To conļ¬rm and shift to the next option, press the MENU button .
Note: Any PMR set on the same channel can receive and listen to the
conversation, also when the other use a CTCSS code.
5.3. Monitor
You can use the MONITOR feature to check for weaker signals in the current
channel.
ā¢ Press the MONITOR button for normal monitoring .
ā¢ Press and hold the MONITOR button. After 3 seconds you can release
the button. You are now continuous monitoring the channel until you push
the TALK button.
5.4. Button Lock
Press and hold the MENU button for 3 seconds to activate or deactivate
the BUTTON LOCK mode. The BUTTON LOCK icon is displayed on the LCD
Screen.Press and hold the MENU button again to deactivate BUTTON
LOCK
5.5. VOX Selection
The PMRS is capable of voice activated (VOX) transmission. In VOX mode, the
radio will transmit a signal when it is activated by your voice or other sound
around you. VOX operation is not recommended If you plan to use your radio
in a noisy or windy environment.
1. Press the MENU button 3 times, the VX icon will blink on the LCD
Screen.
2. Press the UP button to turn the VOX feature ON, or press the DOWN
button to turn the VOX feature OFF.
3. In the VOX mode, the VX icon will be displayed.
4. To conļ¬rm your selection and return to the NORMAL mode, press the TALK
button.
5. To conļ¬rm and shift to the next option, press the MENU button.
NOTE: To save power, the unit will not turn ON the LCD Screen light when in
the VOX mode.
5.6. Channel Scan
CHANNEL SCAN performs searches for active signals in an endless loop from
channel 1 to 8.
1. Press the SCAN S button to activate CHANNEL SCAN.
2. When an active signal (one of 8 channels) is detected, CHANNEL SCAN
pauses and you will hear the active signal.
3. Press the TALK button to communicate through the active signal channel
and CHANNEL SCAN is deactivated.
4. When an active signal (one of 8 channels) is detected, press the UP or
DOWN button to bypass the current channel and continue to search for
another active channel
5. Press the SCAN button to deactivate CHANNEL SCAN mode.
5.7. Battery Charge Level/Low Battery Indication
ā¢ The BATTERY CHARGE LEVEL is indicated by the number of squares
present inside the BATTERY icon on the LCD Screen.
ā¢When the BATTERY CHARGE LEVEL is low, the BATTERY icon will
ļ¬ash to indicate that the batteries need to be replaced or recharged.
5.8. .Headset use
You can operate the PMR using a headset.Plug the headset into the EAR/MIC
jack (5).
5.9. Sending Call Tones
You can use Call Tones to alert the other user to identify yourself. You can also
use Call Tones to signal the beginning or the end of a transmission.
1. Press and release the CALL button, the CALL TONE continues for 3
seconds.
2. Your CALL TONES will transmit to nearby receivers set to the same
channel.
6. SPECIFICATIONS
7. SAFETY INSTRUCTIONS
7.1. Damage antenna.
Do not use any communicator that has a damaged Antenna. If a damaged
antenna comes in contact with the skin, a minor burn may result.
7.2. Batteries.
As batteries can cause property damage and/or bodily injury such as burns if
conductive material such as jewelry, keys or beaded chains touches exposed
terminals. The material may complete an electrical circuit (short circuit) and
become quite hot. Exercise care in handling any charged battery, particularly
when placing it inside a pocket, purse or other container with metal objects.Do
not replace or charge batteries in a potentially explosive atmosphere. Contact
sparking may occur while installing or removing batteries and cause an
explosion.
7.3. For vehicles with air bag.
Do not place your Communicator in the area over an air bag or in the air bag
deployment area. Air bags inļ¬ate with great force. If a communicator is placed
in the bag deployment area and the air bag inļ¬ates, the communicator may be
propelled with great force and cause serious injury to the occupants of vehicle.
7.4. Potentially Explosive Atmospheres.
Turn your communicator off when in any area with a potentially explosive
atmosphere, unless it is a type speciļ¬cally qualiļ¬ed for such use. Sparks in
Channels
CTCSS Sub-channel
Output Power (TX)
Range
8 Channels
38 for each Channel
Output Power :0.5W (Maximum)
Up to 3 Km (open field)
such areas could cause an explosion or ļ¬re resulting in bodily injury or even
death.
7.5. Blasting caps and areas
To avoid possible interference with blasting operation, turn your communicator
off near electrical blasting caps or in a āblasting areaā or in areas posted : āTurn
off two way radioā. Obey all signs and instructions.
Note : Areas with potentially explosive atmospheres are often, but not always,
clearly marked. They include fueling areas such as below deck on boats, fuel
or chemical transfer or storage facilities; areas where the air contains
chemicals or particles, such as grain, dust or metal powders; and any other
area where you would normally be advised to turn off your vehicle engine.
7.6. Electromagnetic Interference/Compatibility:
Nearly every electronic device is susceptible to electromagnetic interference
(EMI) if inadequately shielded, designed or otherwise conļ¬gured for
electromagnetic compatibility.
Turn your unit OFF in any facilities where posted notices instruct you to do so.
Hospitals or health care facilities may be using equipment that is sensitive to
external RF energy.
Turn your unit OFF when on board an aircraft when instructed to do so. Any
use of the unit must be accordance with airline regulations or crew
instructions.
8. CARE AND MAINTENANCE
To clean the unit, wipe with a soft cloth dampened with water. Donāt use a
cleaner or solvents on the unit; they can harm the case and leak inside,
causing permanent damage. Battery contacts may be wiped with a dry lint-free
cloth. If the unit gets wet, turn it off and remove the batteries immediately. Dry
the BATTERY COMPARTMENT with a soft cloth to minimize potential water
damage. Leave the cover off the BATTERY COMPARTMENT overnight or until
completely dry. Do not use the unit until completely dry.
9. WARRANTY
This equipment comes with a 24-month warranty. The warranty will be
honoured on presentation of the original or a copy bill or receipt, provided the
date of purchase and the unit type are indicated.
During the time of the warranty Topcom will repair free of charge any defects
caused by material or manufacturing faults. Topcom will at its own discretion
fulļ¬l its warranty obligations by either repairing or exchanging the faulty
equipment.
Any warranty claims will be invalidated as a result of intervention by the buyer
or unqualiļ¬ed third parties.
Damage caused by inexpert treatment or operation, and damage resulting
from the use of non-original parts or accessories not recommended by
Topcom is not covered by the warranty.
The warranty does not cover damage caused by outside factors, such as
lightning, water and ļ¬re, nor does it apply if the unit numbers on the equipment
have been changed, removed or rendered illegible.
Note: Please do not forget to enclose your receipt if you return the equipment.
www.topcom.net
The CE symbol indicates that the unit complies with the essential
requirements of the R&TTE directive.
Free to use in:
Holland, Ireland, Portugal, Belgium, France, UK, Finland, Greece,
Germany, Austria, Spain, Czech republic, Denmark, Sweden, Italy, Norway,
Switzerland, Luxembourg
This product is in compliance with the essential requirements and other relevant provisions of the R&TTE directive 1999/5/EC.
The Declaration of conformity can be found on :
http://www.topcom.net/support/declarations/
TwinTalker 6000
Handleiding
1
2
11
9
4
10
6
3
7
12
8
5
U8006155/2
1. BESCHRIJVING
(Zie voorpagina)
2. INSTALLATIE
2.1. Verwijderen en installeren van de riemclip
1. Schuif de riemklip (2) naar voor terwijl u de ļ¬xeerlip (1) naar U toe trekt.
2. Bij het terugplaatsen van de riemklip (1) hoort u een klik ter bevestiging.
2.2. Installatie van de batterijen
1. Verwijder de riemclip (2).
2. Trek aan het lipje van de batterijafdekking (4) en verwijder het afdekplaatje
van het batterijvak (3).
3. Plaats het batterijpak.
Zorg ervoor dat de metalen contacten aan de zijkant van de batterij weg van
de radio zijn gericht om contact te maken met de batterijafdekking.
4. Plaats het afdekplaatje (3) terug over het batterijvak en monteer de riemclip (2).
Opmerking: In plaats van de meegeleverde batterij, kan de TT6000 ook
worden gebruikt met 3 standaard oplaadbare AAA-batterijen. Let bij het
plaatsen van de batterij op de polariteit zoals geĆÆllustreerd. U kunt de
bureaulader niet gebruiken met standaard oplaadbare AAA-batterijen
Belangrijk:
Gooi de batterijen bij het klein gevaarlijk afval en niet bij het gewone
huisvuil. Verwijder de batterijen wanneer u uw radio langere tijd niet
gebruikt. Haal het batterijpak niet uiteen.
Maak geen kortsluiting & gooi het niet in vuur.
1. Microfoon
2. Monitor toets
3. Zend toets (PTT)
4. Oproep toets
5. Hoofdtelefoonaansluiting
6. Antenne
7. LCD display
8. Omhoog/Omlaag toets
9. Menu toets
10.Aan/Uit toets
11.Scan toets
12.Luidspreker
2
4
3
1
2.3. Bureaulader
De bureaulader zorgt voor extra laadgemak
1. Plaats de bureaulader op een vlak oppervlak.
2. Steek het ene uiteinde van de meegeleverde adapter in het stopcontact en
het andere in de aansluiting op de achterkant van de bureaulader.
3. Plaats de radio in de lader zoals aangeduid.
4. De laad-LED begint te branden als de radio correct in de lader is geplaatst
en wordt geladen.
5. Het duurt ongeveer 8 tot 10 uur om de batterijen volledig op te laden.
3. LCD DISPLAY
a. Zend indicatie
b. Ontvangst indicatie
c. Volume
d. CTCSS code. Instelbaar van 1 tot 38.
e. Kanaal Scan indicatie
f. VOX indicatie
g. Klavier vergrendeling icoon
h. Batterij indicatie
i. Kanaal nummer. instelbaar van 1 to 8.
4. BEDIENING
4.1. Aan/Uit schakelen.
Druk op de Aan/Uit toets tot u een bieptoon hoort. De display zal het
ingestelde kanaal weergeven.
Druk opnieuw op de Aan/Uit toets tot de display informatie verdwijnt.
hgec
f
b
id a
4.2. Luidspreker volume aanpassen.
Het luidspreker volume kan aangepast worden doormiddel van de Omhoog
/Omlaag toets. Het geselecteerde volume wordt weergegeven in de
display.(zie Ā§LCD Display)
4.3. Een signaal ontvangen.
Aangeschakeld bevindt het toestel zich steeds in ontvangst toestand.
Wanneer een signaal wordt ontvangen verschijnt de ontvangst indicator op de
display. (zie Ā§LCD Display)
4.4. Een signaal zenden.
1. Druk op de Zend-toets. De Zend Indicator (a) wordt weergegeven op de
display.
2. Hou het toestel vertikaal op 5 cm van de mond en spreek in de microfoon.
3. Laat de Zend toets los wanneer men het zenden wil beƫindigen.
NOTA: Om de activiteit op het ingestelde kanaal te controleren, drukt op de
MONITOR toets . U zal een ruis horen wanneer het kanaal niet wordt
gebruikt. Zend geen signaal uit wanneer het kanaal reeds gebruikt wordt.
BELANGRIJK: Wanneer andere gebruikers uw uitgezonden signaal wensen te
ontvangen dient hun toestel ingesteld te staan op hetzelde kanaal en CTCSS
code. Zie āKanaal selecterenā.
5. WERKING
5.1. Kanaal selecteren
De PMR heeft 8 kanalen beschikbaar.
Om een kanaal te selecteren:
1. Druk Ć©Ć©n maal op de MENU toets, het ingestelde kanaal knippert op de
display.
2. Druk de OMHOOG of OMLAAG toets om het gewenste kanaal te
selecteren.
3. Druk opnieuw op de MENU toets om de instelling te bevestigen en
door te gaan naar de volgende instelling āCTCSSā of druk op de Zend-toets
om de instellingen te bevestigen en terug te keren naar het basisscherm.
5.2. CTCSS (Continuous Tone Coded Squelch System)
Deze 2 digit Code komt overeen met een speciļ¬eke toon welke de PMR
uitzendt tijdens een oproep. Als de CTCSS code is ingesteld kunnen geen
Produktspezifikationen
| Marke: | Topcom |
| Kategorie: | Babyphone |
| Modell: | Twintalker 6000 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Topcom Twintalker 6000 benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Babyphone Topcom
3 Oktober 2024
23 August 2024
21 August 2024
5 August 2024
2 August 2024
25 Juli 2024
25 Juli 2024
23 Juli 2024
22 Juli 2024
9 Juli 2024
Bedienungsanleitung Babyphone
- Babyphone Tristar
- Babyphone Basetech
- Babyphone Belkin
- Babyphone Hama
- Babyphone Manhattan
- Babyphone Medion
- Babyphone Nedis
- Babyphone Philips
- Babyphone SilverCrest
- Babyphone Concept
- Babyphone Tefal
- Babyphone IKEA
- Babyphone Technaxx
- Babyphone Alecto
- Babyphone Beurer
- Babyphone Cresta
- Babyphone Denver
- Babyphone EMOS
- Babyphone Kƶnig
- Babyphone Medisana
- Babyphone Grundig
- Babyphone Trebs
- Babyphone Esscom
- Babyphone Geemarc
- Babyphone Motorola
- Babyphone Elro
- Babyphone EZVIZ
- Babyphone Olympia
- Babyphone Switel
- Babyphone Hyundai
- Babyphone Gigaset
- Babyphone Tesla
- Babyphone GOCLEVER
- Babyphone Withings
- Babyphone Babymoov
- Babyphone Chicco
- Babyphone Fysic
- Babyphone Sanitas
- Babyphone Terraillon
- Babyphone Beaba
- Babyphone Hartig And Helling
- Babyphone NUK
- Babyphone Reer
- Babyphone Fisher-Price
- Babyphone Lupilu
- Babyphone Ariete
- Babyphone BabyOno
- Babyphone Jane
- Babyphone Luvion
- Babyphone Tommee Tippee
- Babyphone Ansmann
- Babyphone Duux
- Babyphone Tigex
- Babyphone TRENDnet
- Babyphone Summer
- Babyphone First Alert
- Babyphone Alcatel
- Babyphone Amplicomms
- Babyphone Audioline
- Babyphone Binatone
- Babyphone Brondi
- Babyphone Swissvoice
- Babyphone Vtech
- Babyphone Kodak
- Babyphone Nova
- Babyphone Lionelo
- Babyphone TOMY
- Babyphone Safety 1st
- Babyphone Graco
- Babyphone Oricom
- Babyphone Albrecht
- Babyphone Uniden
- Babyphone Kogan
- Babyphone D-Link
- Babyphone Eufy
- Babyphone TrueLife
- Babyphone HQ
- Babyphone Cobra
- Babyphone Neno
- Babyphone Grixx
- Babyphone Angelcare
- Babyphone Babyfon
- Babyphone IBaby
- Babyphone Lindam
- Babyphone Neonate
- Babyphone SereneLife
- Babyphone Snuza
- Babyphone Xblitz
- Babyphone Foscam
- Babyphone Oregon Scientific
- Babyphone Lorex
- Babyphone Duronic
- Babyphone Fischer Price
- Babyphone Hartig Helling
- Babyphone Heimvision
- Babyphone Jablotron
- Babyphone MicroTalk
- Babyphone Modern-Electronics
- Babyphone Oretti
- Babyphone Pabobo
- Babyphone Philips-Avent
- Babyphone Chipolino
- Babyphone British Telecom
- Babyphone Bebetel
- Babyphone Levana
- Babyphone BT
- Babyphone Summer Infant
- Babyphone Joblotron
- Babyphone Mobi
- Babyphone Hubble Connected
- Babyphone Axvue
- Babyphone Babysense
- Babyphone LeamsiQ
- Babyphone BabySafe
- Babyphone Chillax Baby
- Babyphone Peekyboo
Neueste Bedienungsanleitung fĆ¼r -Kategorien-
9 Oktober 2024
8 Oktober 2024
7 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
1 Oktober 2024
1 Oktober 2024
30 September 2024
29 September 2024