TOA SP-201 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für TOA SP-201 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
INSTALLATION MANUAL
SP-131
SP-201
SP-301
Thank you for purchasing TOA's Speaker Mount Bracket.
Please carefully follow the instructions in this manual to ensure long,
trouble-free use of your equipment.
1. SAFETY PRECAUTIONS
• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation.
• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regarding safety.
• After reading, keep this manual handy for future reference.
When Installing the Unit
• Install the unit only in a location that can structurally support the weight of the unit and the speaker. Doing
otherwise may result in the speaker falling down and causing personal injury and/or property damage.
• Do not useother methods than specied to mountthe unit. Extreme force is applied to the unitand the
speaker could fall off, possibly resulting in personal injuries.
• Use nuts and bolts that are appropriate for the wall's structure and composition. Failure to do so may cause
the speaker to fall, resulting in material damage and possible personal injury.
• Tighten each nut and bolt securely. Ensure that the unit has no loose joints after installation to prevent
accidents that could result in personal injury.
• Donotmounttheunitinlocationsexposedtoconstantvibration.Theunitcanbedamagedbyexcessive
vibration,potentiallycausingthespeakertofall,whichcouldresultinpersonalinjury.
• Do not use anti-rust lubricant. If it contacts resin or rubber parts, they could deteriorate and cause the unit to
fall, possibly resulting in personal injury.
SPEAKER MOUNT BRACKETS
When Installing the Unit
• Avoidtouchingtheunit'ssharpmetaledgetopreventinjury.
When the Unit is in Use
• Do not stand or sit on, nor hang down from the unit as this may cause it to fall down or drop, resulting in
personal injury and/or property damage.
• Havetheunitcheckedperiodicallybytheshopfromwhereitwaspurchased.Failuretodosomayresultin
corrosion or damage to the unit that could cause the unit to fall, possibly causing personal injury.
2. GENERAL DESCRIPTION
These Speaker Mount Brackets are designed to mount horn speakers or wide range speakers to walls or poles.
Pole mounting of the speaker requires addition of the optional YS-60B Pole Band.
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION
3. COMPONENT PARTS
4. INSTALLATION
4.1. SP-131 (Designed for pole mounting)
Quantity
SP-131* SP-201 SP-301
2
- -
-
1
-
- -
1
422
422
844
422
422
422
844
422
No.
1
2
3
4
5
6
7
8
9
10
11
Part name
SP-131 pole bracket
SP-201 base bracket
SP-301 base bracket
Hexagon bolt M8 x 20
Nut (for M8)
Plain washer (for M8)
Spring washer (for M8)
Hexagon bolt M10 x 25
Nut (for M10)
Plain washer (for M10)
Spring washer (for M10)
1
2
3
4
5
6
7
8
9
10
11
* The SP-131 contains 2 sets of brackets.
Step 1. Attach the SP-131 pole bracket to the speaker's mounting bracket.
Use the supplied bolts that fit holes in the speaker mounting bracket.
Step 2. Mount the SP-131 pole bracket to
the pole by using the YS-60B Pole
Band.
Note
The YS-60B permits speaker mounting to
a pole of 9 to 34 cm in diameter.
Example of mounting reinforcement
If the installation location is susceptible to
vibrations or strong wind, use the SP-131 in
combination with 2 YS-60Bs to reinforce the
mounting strength as shown below.
SP-131 pole bracket YS-60B (option)
Reinforcing plate
Note: Separately prepare the one with 5 mm or
more in thickness.
Nut
Spring washer
Speaker's mounting bracket
Plain washers
SP-131 pole bracket
Hexagon bolt
SP-131 pole bracket
YS-60B (option)
4.2. SP-201 (Designed for wall or pole mounting)
4.3. SP-301 (Designed for wall mounting)
Step 1. Attach the SP-201 base bracket to the speaker's mounting bracket.
Use the supplied bolts that fit holes in the speaker mounting bracket.
Step 2. Adjust the mounting angle of the
speaker's mounting bracket.
Adjustable range: Up to 145°
Step 3. Mount the SP-201 base bracket to the wall or pole.
[Example of wall mounting]
Note
Any bolts, nuts, and washers for
wall mounting are not supplied.
Separately prepare ones appropriate for walls.
Step 1. Attach the SP-301 base bracket to the speaker's mounting bracket.
Use the supplied bolts that fit holes in the speaker mounting bracket.
Step 2. Adjust the mounting angle of the
speaker's mounting bracket.
Adjustable range: Up to 145°
Step 3. Mount the SP-301 base bracket to the wall.
Note
Any bolts, nuts, and washers for wall mounting are
not supplied.
Separately prepare ones appropriate for walls.
Nut
Spring washer
Speaker's mounting bracket
Plain washers
SP-201
base bracket
Hexagon bolt
SP-201 base bracket
Speaker's
mounting bracket
YS-60B (option)
[Example of pole mounting]
Use 2 of the optional YS-60B Pole
Bands as shown at right.
Note
The YS-60B permits speaker
mounting to a pole of 20 to 34 cm
in diameter.
Speaker's mounting bracket
SP-301
base bracket
Hexagon bolt
Spring washer
Nut
Plain washers
Speaker's mounting bracket
SP-301 base bracket
Note
Tighten the bolts after angle
adjustment.
Note
Tighten the bolts after angle
adjustment.


Produktspezifikationen

Marke: TOA
Kategorie: Nicht kategorisiert
Modell: SP-201

Brauchst du Hilfe?

Wenn Sie Hilfe mit TOA SP-201 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert TOA

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-