TOA HS-1200WT Bedienungsanleitung

TOA Lautsprecher HS-1200WT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für TOA HS-1200WT (8 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 35 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
OPERATING INSTRUCTIONS
SPEAKER SYSTEMS
1. SAFETY PRECAUTIONS ........................... 2
2. GENERAL DESCRIPTION ......................... 3
3. FEATURES ................................................. 3
4. DIMENSIONAL DIAGRAM ......................... 3
5. INPUT TERMINAL SECTION ..................... 4
6. IMPEDANCE CHANGE .............................. 4
7. ABOUT THE INPUT OVERLOAD
PROTECTION CIRCUIT ............................. 4
8. INSTALLATION .......................................... 5
9. EQUALIZING BY THE
DIGITAL SIGNAL PROCESSOR ............... 7
10. SPECIFICATIONS ...................................... 8
Accessories ................................................. 8
Optional products ........................................ 8
Thank you for purchasing TOA's Speaker System.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
TABLE OF CONTENTS
日本語の取扱説明書は本書の裏面をご覧ください。
HS-1200BT
HS-1200WT
HS-1500BT
HS-1500WT
2
When Installing the Unit
Avoid installing or mounting the unit in unstable locations, such as on a rickety table or a slanted surface.
Doing so may result in the unit falling down and causing personal injury and/or property damage.
Install the unit only in a location that can structurally support the weight of the unit and the mounting bracket.
Doing otherwise may result in the unit falling down and causing personal injury and/or property damage.
Since the unit is designed for in-door use, do not install it outdoors. If installed outdoors, the aging of parts
causes the unit to fall off, resulting in personal injury. Also, when it gets wet with rain, there is a danger of
electric shock.
Owing to the unit's size and weight, be sure that at least two persons are available to install the unit. Failure
to do so could result in personal injury.
Do not use other methods than specified to mount the bracket. Extreme force is applied to the unit and the
unit could fall off, possibly resulting in personal injuries.
Use screws that are appropriate for the ceiling's or wall's structure and composition. Failure to do so may
cause the unit to fall, resulting in personal injury.
Ensure that all screws are securely tightened. If they are not tightened or firmly secured after installation, the
unit could fall down, possibly resulting in personal injury.
Use the specified mounting bracket in combination. Doing otherwise may cause the unit or component to fall
off, resulting in personal injury.
Do not mount the unit in locations exposed to constant vibration. The mounting bracket can be damaged by
excessive vibration, potentially causing the unit to fall, which could result in personal injury.
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION
1. SAFETY PRECAUTIONS
Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation.
Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regarding safety.
After reading, keep this manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.
When Installing the Unit
When unpacking or installing the unit, be sure to handle it with two or more persons. Falling or dropping the
unit may cause personal injury.
Avoid touching the unit's sharp metal edge to prevent injury.
To avoid electric shocks, be sure to switch off the amplifier's power when connecting speakers.
3
When the Unit is in Use
Do not place heavy objects on the unit as this may cause it to fall or break which may result in personal
injury and/or property damage. In addition, the object itself may fall off and cause injury and/or damage.
Make sure that the volume control is set to minimum position before power is switched on. Loud noise
produced at high volume when power is switched on can impair hearing.
Do not operate the unit for an extended period of time with the sound distorting. This is an indication of a
malfunction, which in turn can cause heat to generate and result in a fire.
2. GENERAL DESCRIPTION
TOA’s HS-1200 series and HS-1500 series speakers are 2-way speaker systems made of resin, and feature a
large diameter woofer. They can be installed in many different applications with combined use of the supplied
handles and the optional mounting brackets.
3. FEATURES
Tweeter array realizes a 90° horizontal x 40° vertical directivity control at high frequencies
Compact and lightweight with its high frequency tweeter array arranged in front of the low frequency woofer
Built-in overload protection circuitry for the tweeters
Both permanent and temporary installations available
Either vertical or horizontal speaker installation available for the permanent installation
Easy to carry with a handy handle
Both high- and low-impedance applications available by a rotary switch
4. DIMENSIONAL DIAGRAM
A
B
C
[Front] [Rear][Side]
Screw terminal
NEUTRIK NL4MP
Speakon
Rotary switch
Unit: mm (inches)
[Bottom]
HS-1200BT/1200WT
HS-1500BT/1500WT
A
448 (17.64)
560 (22.05)
B
320 (12.6)
400 (15.75)
C
361 (14.21)
451 (17.76)
Model Dimensions
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION


Produktspezifikationen

Marke: TOA
Kategorie: Lautsprecher
Modell: HS-1200WT
Breite: 361 mm
Tiefe: 320 mm
Gewicht: 10000 g
Empfohlene Nutzung: Universal
Produktfarbe: Weiß
Übertragungstechnik: Kabelgebunden
Impedanz: 8 Ohm
Höhe: 448 mm
RMS-Leistung: 60 W
Gehäusematerial: Polypropylene (PP),Steel
Audio Kanäle: - Kanäle
Anzahl des Antriebs: 1
Treiberdurchmesser: 300 mm
Frequenzbereich: 70 - 20000 Hz
Woofer: Ja
Lautsprecherplatzierung: Ceiling-mountable,Floor,Stand-mountable,Wall-mountable
Lautsprechergehäuse: Geschlossen
Empfindlichkeit: 97 dB
Übergangsfrequenzen: 3000 Hz
Polklemme: Ja
Lautsprechertyp: 2-Wege

Brauchst du Hilfe?

Wenn Sie Hilfe mit TOA HS-1200WT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher TOA

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-