TOA BS-1034EN Bedienungsanleitung

TOA Lautsprecher BS-1034EN

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für TOA BS-1034EN (8 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/8
Thank you for purchasing TOA's Wall Mount Speaker.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
BS-1034ENWALL MOUNT SPEAKER
INSTRUCTION MANUAL
1. SAFETY PRECAUTIONS
• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation.
• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regarding safety.
• After reading, keep this manual handy for future reference.
When Installing the Unit
• Refer all installation work to the dealer from whom
the speaker was purchased. Installation work
requires extensive technical knowledge and
experience. The speaker may fall off if incorrectly
installed, resulting in possible personal injury.
• Install the speaker only in a location that can
structurally support the full weight of the unit and
mounting bracket. Doing otherwise may result in
the speaker falling down and causing personal
injury and/or property damage.
• When installing the speaker in the snowy area,
take appropriate measures to prevent snow from
lying on the speaker. If the snow lies on it, the
speaker may fall, causing personal injuries.
• Do not use other methods than specified to install
the speaker. Extreme force is applied to the
speaker and the speaker could fall off, possibly
resulting in personal injuries.
• Use screws that are appropriate for the wall's
material and structure. Failure to do so may cause
the speaker to fall, resulting in material damage
and possible personal injury.
• Ensure that all screws are securely tightened. If
they are loose after installation, the speaker could
fall down, possibly resulting in personal injury.
• Do not mount the speaker in locations exposed to
constant vibration. The speaker or its mounts can
be damaged by excessive vibration, potentially
causing the speaker to fall, which could result in
personal injury.
WARNING
Indicates a potentially hazardous situation which,
if mishandled, could result in death or serious
personal injury.
1. SAFETY PRECAUTIONS ........................... 1
2. GENERAL DESCRIPTION
AND FEATURES ......................................... 2
3. CONNECTION ............................................ 2
4. INSTALLATION .......................................... 3
5. DETACHING THE SPEAKER .................... 4
6. DIMENSIONAL DIAGRAM ......................... 4
7. WIRING DIAGRAM ..................................... 5
8. FREQUENCY RESPONSE ......................... 5
9. SPECIFICATIONS ...................................... 5
TABLE OF CONTENTS
Traceability Information for Europe
Manufacturer:
TOA Corporation
7-2-1, Minatojima-Nakamachi, Chuo-ku, Kobe, Hyogo,
Japan
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg,
Germany
2
• Do not use anti-rust lubricant. If it contacts resin or
rubber parts, they could deteriorate and cause the
speaker to fall, possibly resulting in personal injury.
• Avoid installing the speaker near seaside or in
locations exposed to corrosive gas. The speaker or
its parts may be subject to corrosion, which might
cause it to fall or result in personal injury.
• Do not install the speaker in indoor swimming pools
or such locations where liquid chemicals are used.
The parts deteriorate if corroded, causing the
speaker to fall, which could result in personal
injury.
When the Unit is in Use
• If any of the following irregularities occurs,
immediately switch off the amplifier's power, and
inform the shop from where the speaker was
purchased. Further using the speaker may result in
fire or electric shock.
· If you detect smoke or a strange smell coming
from the speaker
· If water or any metallic object gets into the
speaker
· If the speaker falls, or the speaker case breaks
• To prevent a fire or electric shock, never open nor
remove the speaker case. Refer all servicing to
your nearest TOA dealer.
When Installing the Unit
• Avoid touching the speaker's sharp metal edge to
prevent injury.
• To avoid electric shocks, be sure to switch off the
amplifier's power when connecting speakers.
When the Unit is in Use
• Do not operate the speaker for an extended period
of time with the sound distorting. Doing so may
cause the speaker to heat, resulting in a fire.
• Do not stand or sit on, nor hang down from the
speaker as this may cause it to fall down or drop,
resulting in personal injury and/or property
damage.
• Have the speaker checked periodically by the shop
from where it was purchased. Failure to do so may
result in corrosion or damage to the speaker or the
mounts that could cause it to fall, possibly causing
personal injury. Do not stand or sit on, nor hang
down from the speaker as this may cause it to fall
down or drop, resulting in personal injury and/or
property damage.
CAUTION
Indicates a potentially hazardous situation which,
if mishandled, could result in moderate or minor
personal injury, and/or property damage.
2. GENERAL DESCRIPTION AND FEATURES
The BS-1034EN is certified according to the European Standard EN 54-24: 2008 and the International
Standard ISO 7240-24: 2010.
• BS-1034EN of which cabinet is made of HIPS resin, can be installed in a vertical or horizontal orientation.
• Thin type wall mount speaker with 5" cone speaker unit
• Two-way speaker system employing a balanced dome tweeter and elliptical horn for high-frequency sound
reproduction in combination with a 5" cone speaker unit ensures high-quality sound.
• The speaker's smoothly curved surface in combination with its straight lines permits it to blend in with
virtually all modern buildings.
• Equipped with a speaker receptacle, providing speaker cable connection and installation ease.
• Equipped with a lock mechanism, preventing the speaker from being detached easily after installation.
• In-wall wiring, exposed wiring, or bridge wiring available for speaker cable connection
• The input power (impedance) can be easily changed by the rear-mounted rotary switch.
TERMINAL
(HOT)
N
(COM)
C R
HOT COM
HOT (N)
COM (C)
Speaker receptacle
(Rear)
Terminal block
with thermal fuse
To the speaker
From the
amplifier
To other
speaker
HOT
COM
3. CONNECTION
Connect the speaker cable to the supplied
speaker receptacle.
Notes
• Use the supplied terminal block only when
wirings are concealed in the wall or a terminal
box is installed for wirings.
• The supplied terminal block is equipped with a
thermal fuse and fiberglass tube. For safety
purposes, connect the terminal block between
the speaker cable and the speaker receptacle
as shown at right.
3
Obstacle
Obstacle
Wall
170 mm (6.69") or more
250 mm (9.84") or more
Tapping screw 4 x 35
(accessory)
Notes on speaker receptacle mounting
70 (2.76)
"UP" mark
120 (4.72)
66.7
(2.63)
83.5
(3.29)
If the supplied tapping screws are not appropriate for the
construction of wall, separately prepare the appropriate screws.
Install the speaker receptacle referring to its "UP" mark.
Position the receptacle at the specified distance away from any
object above and below it for vertical speaker mounting. Keep
the same distance to the right and left of the receptacle
(positioned sideways) for horizontal speaker mounting.
•
•
•
Unit: mm (in)
4. INSTALLATION
Step 1. Attach the speaker receptacle to a wall.
[Notes on horizontal speaker mounting]
• Even if the speaker receptacle is mounted
horizontally, the speaker may be tilted due to its
weight unbalance when attached to the receptacle.
• When changing the logo direction, peel off the logo
carefully as it is affixed using double-faced tape.
Then, re-affix it in the right orientation.
[Exposed wiring]
Notch the top of the speaker receptacle using long-
nose pliers, then make connections.
Speaker cable
Split the speaker cable into 2 branches just before it
enters the speaker receptacle so that it can be routed in
the cable-guide groove on the rear side of the speaker.
Speaker receptacle
Speaker (Rear)
Notch the top of the
speaker receptacle
using long-nose pliers.
Impedance 500 10 kΩ1 kΩ2 k 3.3 kΩ Ω Ω
100 V line Never use this. 5 W 3 W 1 W10 W
70 V line 10 W 5 W 2.5 W 1.5 W 0.5 W
Step 2. Change the input power (impedance) as needed.
The input power (impedance) is factory-preset to
1 k for 10 W/100 V line or 5 W/70 V line.Ω
When changing this setting, use a standard
screwdriver to turn the rotary switch on the
speaker's rear panel to the desired position.
Note
Be sure to follow the instructions below. Failure
to do so may cause damage to the speaker as
excessive input power is applied to it.
· Switch off the amplifier's power when changing
the input power.
· Never make 500 connection in a 100 V lineΩ
system, as excessive input power is applied to
the speaker, possibly resulting in damage.
Step 3. Hold and slide the speaker to insert its speaker
plug into the speaker receptacle.
Note
In this case, force the speaker onto the speaker
receptacle holding the speaker outer frame.
5W
10W
1W
3W 1.5W
0.5W
2.5W
5W
10W
3.3kΩ
10kΩ
2kΩ
1kΩ
500Ω
OFF
100V
LINE
70V
LINE IMP.
Speaker (Rear)
Rotary switch
Speaker receptacle
Speaker (Rear)
Speaker plug
Bold figures represent factory-preset values.

Produktspezifikationen

Marke: TOA
Kategorie: Lautsprecher
Modell: BS-1034EN

Brauchst du Hilfe?

Wenn Sie Hilfe mit TOA BS-1034EN benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher TOA

TOA

TOA F-1300B Bedienungsanleitung

8 Oktober 2024
TOA

TOA F-1300WTWP Bedienungsanleitung

3 Oktober 2024
TOA

TOA PC-391T Bedienungsanleitung

27 September 2024
TOA

TOA PC-391 Bedienungsanleitung

24 September 2024
TOA

TOA PC-1860EN Bedienungsanleitung

24 September 2024
TOA

TOA PC-2360EN Bedienungsanleitung

24 September 2024
TOA

TOA F-1300W Bedienungsanleitung

24 September 2024
TOA

TOA HX-5B-WP Bedienungsanleitung

20 September 2024
TOA

TOA PC-3WR Bedienungsanleitung

19 September 2024
TOA

TOA TZ-205 Bedienungsanleitung

19 September 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024