TMI VD54 Bedienungsanleitung

TMI Uhren VD54

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für TMI VD54 (21 Seiten) in der Kategorie Uhren. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/21
English
VD50 VD51 VD52 VD53 VD54 VD55 VD56 VD57 VD59
Hour
Minute
Second
Window Date O X
Date setting
1st click X
Time setting 2nd click 1st click
Chrono 1/10 second
*12H
Chrono second
6H
Chrono minute
9H 6H
24 hour indicator
X 3H
Sun & moon
3H
Start/ stop
Reset/ split/ split
release
* VD50 is with retrograde chrono 1/10 second at 12H sub-dial
Remarks :
1) The measurement time indicated by the stopwatch hands move independently of the center hands.
2) Chrono 1/10 sec : The stopwatch 1/10 second hand moves for a first minute. After one minute, it indicates the
measurement time when it is stopped. (applicable to VD50, VD55, VD56, VD57, VD59)
* Before setting the time, check if all the chronograph hands - 1/10 second (where applicable), second, minute -
are at the "0"(12 o'clock) position.
* If the stopwatch is in use, press the buttons in the following order to reset it, and then, check if the hands return
to "0" position. (For details , see "HOW TO USE THE STOPWATCH")
* If the chronograph is counting : A -> B
* If the stopwatch is stopped : B
* If the split time is displayed : B -> A -> B
OPERATION MANUAL OF VD5 CHRONOGRAPHS
DISPLAY AND CROWN / BUTTON OPERATION
Hands
Center Hour Hand
Center Minute Hand
Center Second Hand
O
X
Crown
1st click
X
2nd click
1st click
Sub-dials
X
12H
6H
9H
X
3H
X
Buttons
2H (Button A)
4H (Button B)
ADJUSTING THE STOPWATCH HAND POSITION
VD51
VD50
VD52
VD53
VD54
VD56
VD55
VD57
VD59
English
If either of the stopwatch hands are not in the "0" position , reset them following the procedure below.
1) Pull the crown out to :
VD50, VD51, VD52, VD53, VD57 (calibres with date window) : second click
VD54, VD55, VD56, VD59 (calibres without date window) : first click
2) Press button A or B to reset all stopwatch hands to "0" position.
* The stopwatch minute hand moves correspondingly with the stopwatch second
hand.
* The hands move quickly if the respective buttons are kept pressed.
3) Push the crown back to the normal position.
* Before setting the time, check that the chronograph measurement is stopped.
VD50, VD51, VD52, VD53, VD57 (calibres with date window) :
1) Pull out the crown to the first click.
2) Turn the crown clockwise until the preview day's date appears.
3) Pull out the crown to the second click when the second hand
is at the 12 o'clock position. It will stop on the spot. Set the
hands to the desired time of the day (make sure AM/PM is set
correctly) by turning the crown.
* When the crown is at the second click position, do not press any button. Otherwise the chronograph hands
will move.
4) Push the crown back in the normal position in accordance with a time signal.
* Do not set the date between 9:00 P.M. and 1:00 A.M, otherwise the day may not change properly. If it is
necessary to set the date during the time period, firstly change the time to any time outside it, set the date and
then reset the correct time.
VD54, 55, 56, 59 (calibres without date window) :
1) Pull out the crown when the second hand is at the 12 o'clock
position. The second hand will stop on the spot.
2) Set the hands to the desired time of the day by turning the
crown
VD54, VD56, VD59 : make sure AM/PM is set correctly
* Do not press any button, otherwise the chronograph hands will move.
3) Push the crown back to the normal position in accordance with a time signal.
* The measurement time is indicated by the stopwatch hands that move independently of the center hands (and
24-hour hand where applicable).
* The stopwatch can measure up to 60 minutes
* The stopwatch measures in 1/10 second increments. (VD50, VD55, VD56, VD57, VD59)
Standard measurement (e.g. 100m race)
Press the buttons in the following order :
TIME SETTING
HOW TO USE THE STOPWATCH
Button A
Button B
set the day
set the time
set the time
Button A
(START)
Button A
(STOP)
Button B
(RESET)
English
Accumulated elapsed time measurement (e.g. basketball game)
Split time measurement (e.g. 5,000m race) (this function is not available in VD50)
SII Products
* Restart and stop of the
stopwatch can be
repeated as many times
as necessary by pressing
button A.
Button A
(START)
Button B
(SPLIT)
Button B
(SPLIT RELEASE)
Button A
(STOP)
* Measurement and
release of the split time
can be repeated as many
times as necessary by
pressing button B.
Button B
(RESET)
Button A
(START)
Button A
(STOP)
Button A
(RESTART)
Button A
(STOP)
Button B
(RESET)

Produktspezifikationen

Marke: TMI
Kategorie: Uhren
Modell: VD54

Brauchst du Hilfe?

Wenn Sie Hilfe mit TMI VD54 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Uhren TMI

TMI

TMI VD36 Bedienungsanleitung

11 Juli 2024
TMI

TMI VC01 Bedienungsanleitung

6 Juli 2024
TMI

TMI VD54 Bedienungsanleitung

5 Juli 2024
TMI

TMI PC10 Bedienungsanleitung

4 Juli 2024

Bedienungsanleitung Uhren

Neueste Bedienungsanleitung für -Kategorien-

Invicta

Invicta Bolt 29838 Bedienungsanleitung

16 Oktober 2024
Invicta

Invicta Objet D Art 22603 Bedienungsanleitung

16 Oktober 2024
Invicta

Invicta Pro Diver 14371 Bedienungsanleitung

16 Oktober 2024
Invicta

Invicta Bolt 31227 Bedienungsanleitung

16 Oktober 2024
Invicta

Invicta Coalition Forces 32722 Bedienungsanleitung

16 Oktober 2024
TW Steel

TW Steel TW902 Canteen Bedienungsanleitung

16 Oktober 2024
Victorinox

Victorinox Officers Day Date Bedienungsanleitung

16 Oktober 2024
TW Steel

TW Steel TW821 Canteen Bedienungsanleitung

16 Oktober 2024
Invicta

Invicta Aviator 32916 Bedienungsanleitung

16 Oktober 2024
Invicta

Invicta Pro Diver 25747 Bedienungsanleitung

16 Oktober 2024