Tiptop Audio CP909 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tiptop Audio CP909 (5 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 36 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
The CP909 is a one-to-one clone of the original circuit found in Roland's TR-909
drum machine. During the design phase, we created additional features only when
implementation would not compromise the original signature sound, or add excessive
costs. Cloning a circuit that was designed and produced in the 80's was not an
easy task. A variety of obstacles including availability of the original parts, the
modern SMT manufacturing process, the differences in +/-12V Eurorack power
versus the +/-15V of the original 909, and far many more were addressed in the
creation of this module. To learn more about the process of remaking the sound
generators in this series please refer to the BD808 user guide.
Introduction.
2
The CP909 is Roland's TR-909 analog clap sound generator adapted for modular
synthesizer use. The front panel contains all of the controls found on the original
TR-909 drum machine, allowing you full control over the sound’s volume levels to
mix with other drums, and accent levels. In addition to those original controls we
have also added the unique TRASH knob, further enhancing this circuit.
About the Making of the CP909.
Let’s get started.
To start using the CP909, just plug a gate signal into the GATE IN, plug the
CLAP OUT to your sound system, set the LEVEL half way and TRASH to max,
pointing at the direction of the 909 dot.
3
Accent and Levels:
Dynamic Accent and Level control of any drum sound in the mix is a big part of
making a beat sound right. Dynamic Accent provides emphasis on a particular note
through loudness. In analog circuits like the CP909, the accent pulse physically
"hits" the internal envelope circuit harder and provides not only a louder sound but
also slightly more attack (much like if you were to hit a real drum harder or softer
with a drum stick.)
While the original 909 has one global accent knob for setting accents levels for all
of its sounds, the CP909 (and all other drum modules in this series) offers an
independent accent level control. This feature adds to a clear work flow
than what was possible with the original machine.
Accent Explained:
The accent input can be driven by either a gate/trigger or CV signal.
While the accent input is not in use, the incoming gate input is routed
(normalized) to both the accent input and the gate input. This serves for two
purposes:
1. To allow you to reach the hottest drum sound possible even when there is no
accent input signal connected.
2. It makes the ACCENT knob act as a fine control of the output gain level. This
is very useful in situations where the level knob range is too coarse for setting
precise levels in a mix with other drum sounds.
Connecting a gate or CV signal into the accent input will break the internal routing
mentioned above and will allow for independent control over accent regardless
of the incoming gate signal. In this case as long as there is no accent signal
present, the drum sound will be set to the minimum accent level set internally,
and once the accent input gets hit by a gate or CV signal, the drum sound will get
louder in proportion to the accent level set by the accent knob. In short: the
higher the knob setting, the larger the difference will be in gain levels between
the accented notes and the un-accented notes. Using CV allows for even greater
variations.
Dynamics and Gain.


Produktspezifikationen

Marke: Tiptop Audio
Kategorie: Nicht kategorisiert
Modell: CP909

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tiptop Audio CP909 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Tiptop Audio

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-