TIC B503 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für TIC B503 (6 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
®
21
Speaker Layout
Bluetooth Button (BT)
Transmiitter Mode Button (TX)
Receiver Mode Button (RX)
Power Button
IR Remote Receiver Node
Bluetooth Indicator LED (Blue)
Power
Remote Comtrol
Power Button
Bluetooth Button
Channel Button (press to switch between stereo,
left channel, and right channel)
④ / Play Pause
Previous Track
Next Track
Decrease Volume
Increase Volume
Transmitter Mode
Receiver Mode
Reset Button
3 4
1. Upon inially powering up, you should hear an opening tone. The blue LED light will be flashing slowly, indicang it is in
standby mode. If the blue LED is solid, a Bluetooth device is already connected.
2. To pair a Bluetooth device (smartphone, tablet, computer, transmier, etc.), double-click the Bluetooth (BT) buon. You
should hear the voice prompt “pairing. The speaker is now in discovery mode.
3. In the Bluetooth seng menu of your Bluetooth device, search for “TIC BT Speaker and connect. When you hear the voice
prompt “connected”, the pairing process is completed. The blue LED is now solid.
4. To disconnect a connected Bluetooth device, double-click the Bluetooth buon. The blue LED will be flashing again. You
can then switch to another previously paired Bluetooth device by repeang step 3 on that device’s Bluetooth seng menu.
To connect to a new Bluetooth device, repeat step 2 & 3.
5. If you want a full reset and delete all previous Bluetooth pairings, double click the Reset buon.
Bluetooth Device Pairing
Note: The speaker can remember mulple Bluetooth devices. Speaker will automacally reconnect to the most nearby
paired device within range each me you turn it on. The connecon range is up to 300 feet (outdoor with clear line of sight)
for Bluetooth 5.0 devices. The speaker is backward compable with devices with older Bluetooth specicaons. However,
the range will be limited to the range of the older specicaon (such as ~20-50 feet for 4.0 devices).
In the following instruconal secons, when instructed to press a specic buon, you can either aim the remote
at the speaker and press the buon or press the respecve buon on the device itself if it is available. Not
every buon is available on the actual speaker. Please note the posion of the IR receiving node on the
speaker when aiming the remote. The performance of the remote may degrade if the remote is not aiming
directly at the node or if strong sunlight is interfering with the signal. The typical range of the remote is 30 feet.
You may need to move closer if the signal is not receiving properly.
A single remote can control any compable TIC speaker/device. Aim remote carefully if mulple speakers are
placed in close proximity. Volume can be individually customized for each speaker via the remote. When the
volume is adjusted on the connected Bluetooth device or music/video applicaon, it will be applied to all speakers.
During broadcast mode, track control will only work when aiming at the main device. You can alternavely control
the track directly on your Bluetooth device or music/video applicaon.


Produktspezifikationen

Marke: TIC
Kategorie: Lautsprecher
Modell: B503

Brauchst du Hilfe?

Wenn Sie Hilfe mit TIC B503 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher TIC

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-