Thermaltake ARGENT E700 Bedienungsanleitung

Thermaltake Spielstuhl ARGENT E700

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Thermaltake ARGENT E700 (11 Seiten) in der Kategorie Spielstuhl. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/11
Test Report
No.SDHL2107011715FT-01 Date: Jul 27, 2021 Page 1 of 11
THERMALTAKE TECHNOLOGY CO., LTD.
5F, NO.185, SECTION 2, TIDING BOULEVARD, NEIHU DISTRICT, 114, TAIPEI, TAIWAN
Sample Description :
ARGENT E700 GAMING CHAIR
As above test item and its relevant information regarding to the submission are provided and confirmed by the
applicant. SGS is not liable to either the test item or its relevant information, in terms of the accuracy, suitability,
reliability or/and integrity accordingly.
************
Sample Receiving Date :
Jun
30, 2021
Test Performing Date :
Ju
l 01, 2021 to Jul 20, 2021
Test Performed :
Selected test(s) as requested by applicant
Test Result Summary
No. Test(s) Requested Result(s) Comments
1 ANSI/BIFMA X5.1-2017 (Type I, III) PASS /
For further details, please refer to the following page(s)
Signed for and on behalf of
SGS-CSTC Standards Technical Services Co., Ltd. Shunde Branch
Bill Wang
Authorized Signatory
Test Report No.SDHL2107011715FT-01 Date: Jul 27, 2021 Page 2 of 11
TESTS AND RESULTS
Test Conducted:
ANSI/BIFMA X5.1-2017 General-Purpose Office Chairs – Tests.
No. of Sample:
1 piece. For more sample information and pictures, please refer to the following page.
Chair Type: Type I, III.
Test and Requirements Test Results
Safety, Durability and Structural Adequacy
5 Backrest Strength Test - Static - Type l and II
5.4.1 Functional Load
There shall be no loss of serviceability to the chair when 667 N (150 lbf.) is applied to
the backrest at the specified position for one (1) minute. With the backrest at its back
stop position, apply a force that is initially 70 degrees ± 10 degrees to the plane of the
backrest. The force is not intended to be maintained at 70 degrees ± 10 degrees
throughout the loading of the backrest.
PASS
5.4.2 Proof Load
There shall be no sudden and major change in the structural integrity of the chair, loss
of serviceability is acceptable, when 1001 N (225 lbf.) is applied to the backrest at the
specified position for one (1) minute. With the backrest at its back stop position, apply a
force that is initially 70 degrees ± 10 degrees to the plane of the backrest. The force is
not intended to be maintained at 70 degrees ± 10 degrees throughout the loading of
the backrest.
PASS
6 Backrest Strength Test - Static - Type lll
6.4.1 Functional Load
There shall be no loss of serviceability to the chair when 667 N (150 lbf.) is applied to
the backrest at the specified position for one (1) minute. With the backrest at its back
stop position, apply a force that is initially 90 degrees ± 10 degrees to the plane of the
backrest. The force is not intended to be maintained at 90 degrees ± 10 degrees
throughout the loading of the backrest.
PASS
6.4.2 Proof Load
There shall be no sudden and major change in the structural integrity of the chair, loss
of serviceability is acceptable, when 1001 N (225 lbf.) is applied to the backrest at the
specified position for one (1) minute. With the backrest at its back stop position, apply a
force that is initially 90 degrees ± 10 degrees to the plane of the backrest. The force is
not intended to be maintained at 90 degrees ± 10 degrees throughout the loading of
the backrest.
PASS
7 Drop Test - Dynamic
7.4.1 Functional Load Test
There shall be no loss of serviceability when a test bag weighing 102 kg (225 lb.) is
free fell from 152 mm (6 in.) above the uncompressed seat to the specified position on
seat. Remove the bag, and set height to its lowest position and repeat the test for
chairs with seat height adjustment features.
PASS
Test Report No.SDHL2107011715FT-01 Date: Jul 27, 2021 Page 3 of 11
Test and Requirements Test Results
7.4.2 Proof Load Test
There shall be no sudden and major change in the structural integrity of the chair. Loss
of serviceability is acceptable when a test bag weighing 136 kg (300 lb.) is free fell from
152 mm (6 in.) above the uncompressed seat to the specified position on seat.
Remove the bag, and set height to its lowest position and repeat the test for chairs with
seat height adjustment features.
PASS
8 Swivel Test – Cyclic
There shall be no loss of serviceability after 60,000cycles of rotation (360°) at a rate
between 5 and 15 rotations per minute under a 122 kg (270 lb.) load on the seat. If the
seat height is adjustable set the height to its lowest position, for all chairs, continue the
test for an additional 60,000 cycles to a total of 120,000 cycles.
PASS
9 Tilt Mechanism Test – Cyclic
There shall be no loss of serviceability to the tilt mechanism after 300,000cycles at a
rate between 10 and 30 cycles per minute under a 109kg (240lbs.) load to the center of
the seat.
Note: This test shall be performed on Type I and Type II chairs with tilting backrests.
PASS
10 Seating Durability Tests – Cyclic
10.3 Impact Test
There shall be no loss of serviceability to the chair after a test bag weighing 57kg
(125lbs.) is free fell from 36 mm (1.4 in.) above the uncompressed seat to the specified
position on seat for 100,000 cycles.
The drop height and/or seat height shall be adjusted during the test if the drop height
changes by more than 13 mm (0.5 in.). The cycling device shall be set at a rate
between 10 and 30 cycles per minute.
Note: Chairs with less than 44 mm (1.75 in.) of cushioning materials in the seat shall
have foam added to bring total cushioning thickness to 50 mm ± 6 mm (2 in. ± 0.25 in.).
Any additional foam added to the top of the seat shall have a 25% Indentation Force
Deflection (IFD) of 200 N ± 22 N (45 lbf. ± 5 lbf.). Flexible seat surfaces (i.e., mesh,
flexible plastic, etc.) are not considered cushioning materials.
PASS
10.4 Front Corner Load-Ease Test – Cyclic – Off-center
After completing the impact test, alternately apply a load of 890 N (200 lbf.) through a
203 mm ± 13 mm (8 in. ± 0.51 in.) diameter loading device at one front corner flush to
each structural edge at a rate of 10 to 30 cycles per minute for 20,000 cycles.
Reposition the load to the other front corner, and perform the test for an additional
20,000 cycles.
There shall be no loss of serviceability to the chair after completion of both the impact
and load-ease tests. If applicable, the chair base (center structure) shall not touch the
test platform as a result of the impact loads.
Note: Applying the loads in an alternating sequence to attain a total of 40,000 cycles is
an acceptable method of performing this test.
PASS
11 Stability Tests

Produktspezifikationen

Marke: Thermaltake
Kategorie: Spielstuhl
Modell: ARGENT E700

Brauchst du Hilfe?

Wenn Sie Hilfe mit Thermaltake ARGENT E700 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Spielstuhl Thermaltake

Thermaltake

Thermaltake U Comfort Bedienungsanleitung

28 September 2024
Thermaltake

Thermaltake ARGENT E700 Bedienungsanleitung

21 Juli 2024

Bedienungsanleitung Spielstuhl

Neueste Bedienungsanleitung für -Kategorien-

Trust

Trust Rona GXT 706 Bedienungsanleitung

9 Oktober 2024
Deltaco

Deltaco GAM-080 Bedienungsanleitung

5 Oktober 2024
Woxter

Woxter Stinger Station Alien Bedienungsanleitung

27 September 2024
Vorago

Vorago CGC301 Bedienungsanleitung

25 September 2024
AeroCool

AeroCool Crown Plus Bedienungsanleitung

6 September 2024
X Rocker

X Rocker Convertible 2110901 Bedienungsanleitung

6 September 2024
X Rocker

X Rocker Covert 2.1 Wireless Bedienungsanleitung

6 September 2024
Speed-Link

Speed-Link Regys Bedienungsanleitung

6 September 2024
X Rocker

X Rocker CXR3 LED Bedienungsanleitung

5 September 2024
Mad Dog

Mad Dog GCH701 Bedienungsanleitung

5 September 2024