Texas Instruments TI-10 Bedienungsanleitung

Texas Instruments Taschenrechner TI-10

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Texas Instruments TI-10 (6 Seiten) in der Kategorie Taschenrechner. Dieser Bedienungsanleitung war für 36 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/6

-1-



TI-10

Calculator and Arithmetic Trainer



2001, 2002 Texas Instruments Incorporated

General Information

The TI-10 has two power sources — battery and solar. It

operates in well-lit areas using the solar cell, and it operates

in other light settings using the battery.

Examples

: See the “Examples” page for problems with

keystroke sequences that demonstrate many of TI-10

functions and capabilities. Before starting each problem set,

reset and clear the TI-10 by pressing

b”

. This helps to

ensure that your displays are the same as those shown in

the examples. In Problem Solving AUTO mode, however,

displays will vary from those shown in the examples

because the problems presented by the TI-10 are random.

On/Off

−

To turn the TI-10 on, press

−

If the TI-10 is on, press

−

to turn it off.

If you do not press any keys for about five minutes, the

Automatic Power Down™ (APD™) feature turns off the

TI-10 automatically. After APD, press

−

to power up again.

The display, all pending operations, settings, and memory

(including history) are retained.

Two-Line Display and Scrolling

"!#

The TI-10 has a two-line display that shows up to 11

characters at a time on each line. Entries that do not fit on

the first line wrap to the second. When the second line is

filled, the characters scroll up.

Entries can be up to 88 characters.

Exceptions

: For Op1

(Stored Operation), the limit is 44 characters. For

‹

(Problem Solving) MAN (manual) mode, entries do not

wrap; entries cannot exceed 11 characters.

When a result exceeds the capacity of the display, it is

shown in scientific notation. However, if the result is greater

than 10

, an OVERFLOW ERROR is displayed; if the result

is less than 10

, an UNDERFLOW ERROR

is displayed.

Scroll using these keys:

, and

Press

and

to scroll through entries or to move the

underline from one item to another within a menu.

Press

and

to scroll through history or to move between

menus when the menus are displayed.

Clearing, Correcting, and Resetting

”

Deletes the character to the left of the

cursor.

”

Only clears the display and error condition.

Does not clear value from memory, mode

settings, etc.

Clears the value from memory.

Resets the TI-10 clearing the calculator

completely and restoring all default

settings. MEM CLEARED is displayed.

Press

”

to clear the display.

You can also reset by:

Using the RESET menu. See

Calculator/Problem Solving menus.

Pressing

−

and

”

simultaneously.

Display Indicators

Indicator Definition

‹

TI-10 is in the Problem Solving tool.

TI-10 is in the Place Value feature.

Fix

TI-10 is rounding results.

A value other than zero is in memory.

Op1

Stored operation is active.

Auto

Problem Solving (

‹

) is in AUTO (automatic)

mode.

. P

When using

, result will be displayed in

decimal format.

More entry history or menus are available.

Press

(up) or

(down) to access.

w x

An entry extends beyond the capacity of the

display. Press

to scroll.

Calculator / Problem Solving Menus

Press Calculator Tool

‡

‡$

‡$$

‡$$$

(Division result format)

+ 1 ? (Show or hide OP)

Y n(Clear stored operation)

n Y(Reject or select RESET)

Press Problem Solving Tool (AUTO)

‡

‡$

‡$$

AUTO MAN(Automatic or Manual)

1 2 3 (Level of Difficulty)

+ -

?(Type of Operation)

Press Problem Solving Tool (MAN)

‡"®

‡"®$

AUTO MAN

(Automatic or Manual)

11 -. - 1 -. (Place Value feature)

Once in a menu:

To underline a menu item, press

To select the underlined item, press

To exit a menu, press

‡

Note: To select an option from the Place Value menu, the

TI-10 must be in

‹

(Problem Solving) MAN (manual)

mode.

Pressing

‡

while in the

‹

(Problem Solving) tool

temporarily displays the Scoreboard before the AUTO /

MAN menu is displayed.

Order of Operations

The TI-10 uses the Equation Operating System (EOS

) to

evaluate expressions.

1st Expressions inside parentheses.

2nd Functions that require a closing parenthesis ) and

precede the argument.

3rd Negation (

4th Multiplication, implied multiplication, division.

5th Addition and subtraction.

6th

completes all operations.

Basic Arithmetic

Enters the numerals 0 through 9.

Adds, subtracts, multiplies, divides.

Inserts a decimal point.

Enters a negative sign. (Does not act as

an operator.)

Opens, closes a parenthetical

expression.

Completes all operations.

-2-

Division

When you divide a positive whole number by a positive

whole number using

, the result is displayed in the form Q

r R, where Q is the quotient and R is the remainder. For

example, if you are in the QR setting: 12

2 r 2.

If you use the result of QR division in a subsequent

calculation, the TI-10 uses only the quotient. The remainder

is dropped.

For decimal results, select the decimal division setting by

pressing

‡" ®

. Press

‡

to see the

previous answer as a decimal. For example: 12

2.4.

Memory

After a calculation, press

to add the displayed result to

the value in memory or

to subtract the displayed result

from the value in memory. Whenever memory contains a

value other than 0, M displays on the screen.

To recall the value from memory for use in a calculation,

press

once.

To clear memory, press

twice.

Stored Operation

›

Op1 stores an operation with a constant value. You can

then repeat this stored operation as many times as desired

by pressing a single key —

›

1. Press

›

2. Enter the operator first (+, -,

) and then the number.

3. Press

›

4. Initialize with a starting value.

5. Each time you press

›

, the operation with the constant is

applied.

The computation with the stored operation appears in the

first line of the display, and the result appears in the second

line.

To hide the computation line:

1. Press

‡$"

(to underline ?, if necessary)

2. Press

‡

again to return to the stored operation.

3. Continue pressing

›

If the expression does not fit on the line, it will not show.

When display space permits, a counter on the second line

shows how many times you have pressed

›

To clear the contents of Op1:

1. Press

‡$$

2. Select

Y (yes), if necessary.

3. Press

4. Press

”

‡

to return to the last result display. Resetting

the TI-10 also clears Op1.

Rounding



‘

’

“

™

You can round results using

in conjunction with the

Place Value keys to specify a given number of places. The

internally stored value is not rounded. The calculated value

is padded with zeros as needed. You must press

each

time you want to change the number of places.

Keys Action

Š 

Rounds to thousands.

Š ‘

Rounds to hundreds.

Š ’

Rounds to tens.

Š “

Rounds to ones.

Š ˜

Rounds to nearest tenth.

Š ™

Rounds to nearest hundredth.

Š r

Removes fixed-decimal setting.

These Place Value keys also work with

. See Place

Value.

Problem Solving

‹



[

Problem Solving lets you practice and test your skills.

To enter Problem Solving, press



You can choose either AUTO (automatic) or MAN (manual)

mode.

AUTO Mode

‹

(Problem Solving) AUTO mode (the default), the TI-10

presents problems with one element missing, for example:

5+2=? or 5+?=7 or 5?2=7. You can select the type of

problem and choose from three levels of difficulty. The

default is addition at Level 1.

Level of Difficulty

. While in

‹

AUTO mode, press

‡$

to access the menu. Press

to select the level of

difficulty (1, 2, or 3). Press

‡

, and the TI-10 will

present problems at the selected level. Or, while in

‹

mode, press

to advance to the next level. After Level

3, pressing

again returns you to Level 1.

Type of Problem

. While in

‹

AUTO mode, press

‡$$

to access the menu. Press

to select

the type of problem — addition (+), subtraction (

multiplication (

), division (

), or find the operator (?). Press

‡

, and the TI-10 will present problems of the

selected type.

Procedure.

When a problem is presented:

1. Enter an answer and press

2. If your answer is correct, the display shows

YES, clears the

screen, and presents another problem.

3. If your answer is not correct, the display shows

and indicates

whether the correct solution is less than

or greater than

the

answer that you entered.

4. The incorrect answer is cleared from the display so you can enter

another answer to that same problem.

5. If you enter three incorrect answers to a given problem, the TI-10

shows the correct answer, clears that problem, and presents a

new problem.

Scoreboard

. The TI-10 shows a Scoreboard after every fifth

problem. Every correct solution you entered registers one

YES in the Scoreboard, and three incorrect answers in a row

in the Scoreboard. After 100, the

Scoreboard returns to zero.

Press

‡

to display the Scoreboard at any time. The

Scoreboard is then replaced by the AUTO / MAN menu after

a few seconds. Press

‡

again to return to the problem.

MAN Mode

Using

‹

(Problem Solving) MAN (manual) mode, you can

compose your own problems.

1. Press

‡

to access the menu.

2. Press

to underline MAN.

3.Press

‡

The TI-10 is ready for you to enter your problem and your

solution. The TI-10 accepts only non-negative integers in

this mode. To indicate a missing element, press



‹

(Problem Solving), press

]

to change between

AUTO and MAN

mode. Auto shows in the top line of the

display when Problem Solving AUTO is selected.

‹

MAN mode, it is possible to enter a problem that has

one solution, multiple solutions, or no solution. The TI-10

tells you how many solutions the problem has.

Problems with one missing element generally have only one

solution. You get three tries. After three incorrect answers, the

calculator displays the correct answer and then clears the display

so you can enter a new problem.

Problems with two missing elements may have multiple solutions.

For example: ?+?=5 has 6 solutions; ?x?=24 has 8 solutions. For

multiple-solution problems, the question mark replaces the

operands. Question marks may not appear in the place of the

operator or the answer. These problems are not cleared after a

correct solution or after three incorrect answers. Instead, the

problem remains so that you can enter other solution sets. To

clear the problem at any time, press

”

When the answer to a problem is not a positive integer (such as

2), the TI-10 indicates that the problem has zero solutions.

-3-

However, if you enter an answer, it will tell you whether your

answer is less than

or greater than

the correct answer.

Inequalities

. Instead of entering an equation, you can test an

inequality using

[

. You get only one try because

the inequality statement is either true or false. With

inequalities you can enter decimals.

To exit Problem Solving, press



again. All Problem

Solving history will be cleared.

Place Value



‘

’

“

™

‹

(Problem Solving) MAN mode, you can access the

Place Value menu by pressing

‡

What is the place value of a given digit?

Enter a number. To

determine the whole number place or the decimal place of a given

digit, press

and then press the digit in question.

For a number with a repeated digit, press the given digit once for

the first occurrence, twice for the second occurrence, etc. Each

time you press the given digit in succession, the display shifts to

the next occurrence of the digit to the left of the first occurrence

and shows the place value for that occurrence.

How many ones, tens, hundreds, thousands, tenths, or

hundredths are in a given number?

Press

‡$

, if necessary

underline 11 -. (default), and press

‡

. Enter the

number to be analyzed,

press

, and then press

“

’

‘



, or

™

What digit of a number is in a given place?

Press

‡$

underline - 1 -., and press

‡

. Enter the number to be

analyzed, press

, and then press

“

’

‘



™

. The answer appears briefly and then clears so you can

press another digit or Place Value key.

Once Place Value is active, it is not necessary to press

before each digit or place that you wish to examine for a

given number. You must press

”

before entering a new

number to analyze. Then you must activate Place Value

again by pressing

To exit Place Value, press

”

Error Conditions

Arith Error

Arithmetical error.

Syn Error

Syntax error.

P 0 Error

Attempting to divide by zero.

Mem Error

Error in attempting to store entry in memory.

Op Error

Error following steps for using Op1

Overflow

Error Overflow. Result is too large for the display.

Underflow

Error Underflow. Result is too small for the display.

In some cases,

”

restores the last display before the error

message appeared.

Errors appear in history as Error .

In Case of Difficulty

If you get unexpected results:

Review the instructions to be certain calculations were entered

correctly.

Check the mode (

‡

) setting and rounding (

) function.

Reset the TI-10. See Clearing, Correcting, and Resetting.

Check the battery to ensure that it is fresh and properly installed.

See Battery Replacement. Change the battery when:

− −

does not turn the unit on, or

−

the screen goes blank, or

−

you get unexpected results.

To continue using the TI-10 until you can change the

battery:

1. Expose the solar panel to brighter light.

2. Reset the TI-10. See Clearing, Correcting, and Resetting.

Battery Replacement

The TI-10 uses the CR2025 battery, or the equivalent.

1. Place the protective cover over the TI-10, and then turn the

calculator face down.

2. Remove the screws from the back of the case, using a small

Phillips screwdriver.

3. Carefully separate the front from the back, starting from the

bottom of the case.

Caution: Be careful not to damage any internal parts.

4. Remove the old battery, using a small Phillips screwdriver, if

necessary.

5. Replace with a new battery, and then replace the back of the

case.

Caution: Avoid contact with other TI-10 components while

changing the battery.

6. If necessary, reset the TI-10. See Clearing, Correcting, and

Resetting.

Caution: Dispose of old batteries properly. Do not incinerate

batteries or leave where a child can find them.

TI Product Service and Warranty Information

For General Information

E-mail: ti-cares@ti.com

Phone: 1

800

CARES (1

800

842

2737)

For U.S., Canada, Mexico, Puerto Rico, and Virgin Islands

only

Home Page: education.ti.com

For Technical Questions

Phone: 1

972

917

8324

For Product (hardware) Service

Customers in the U.S., Canada, Mexico, Puerto Rico and

Virgin Islands:

Always contact Texas Instruments

Customer Support before returning a product for service.

All other customers: Refer to the leaflet enclosed with this

product (hardware) or contact your local Texas Instruments

retailer/distributor.

1-Year Limited Warranty

Customers in the U.S. and Canada Only—One-Year Limited

Warranty for Commercial Electronic Product

This Texas Instruments (“TI”) electronic product warranty extends

only to the original purchaser and user of the product.

Warranty Duration. This TI electronic product is warranted to the

original purchaser for a period of one (1) year from the original

purchase date.

Warranty Coverage. This TI electronic product is warranted against

defective materials and construction. THIS WARRANTY IS VOID IF

THE PRODUCT HAS BEEN DAMAGED BY ACCIDENT OR

UNREASONABLE USE, NEGLECT, IMPROPER SERVICE, OR

OTHER CAUSES NOT ARISING OUT OF DEFECTS IN

MATERIALS OR CONSTRUCTION.

Warranty Disclaimers. ANY IMPLIED WARRANTIES ARISING

OUT OF THIS SALE, INCLUDING BUT NOT LIMITED TO THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION

TO THE ABOVE ONE-YEAR PERIOD. TEXAS INSTRUMENTS

SHALL NOT BE LIABLE FOR LOSS OF USE OF THE PRODUCT

OR OTHER INCIDENTAL OR CONSEQUENTIAL COSTS,

EXPENSES, OR DAMAGES INCURRED BY THE CONSUMER OR

ANY OTHER USER.

Some states/provinces do not allow the exclusion or limitation of

implied warranties or consequential damages, so the above

limitations or exclusions may not apply to you.

Legal Remedies.

This warranty gives you specific legal rights, and

you may also have other rights that vary from state to state or

province to province.

Warranty Performance. During the above one (1) year warranty

period, your defective product will be either repaired or replaced with

a reconditioned model of an equivalent quality (at TI’s option) when

the product is returned, postage prepaid, to Texas Instruments

Service Facility. The warranty of the repaired or replacement unit will

continue for the warranty of the original unit or six (6) months,

whichever is longer. Other than the postage requirement, no charge

will be made for such repair and/or replacement. TI strongly

recommends that you insure the product for value prior to mailing.

Software. Software is licensed, not sold. TI and its licensors do not

warrant that the software will be free from errors or meet your

specific requirements. All software is provided “AS IS.”

product are protected by copyright.

All Customers outside the U.S. and Canada

For information about the length and terms of the warranty, refer

to your package and/or to the warranty statement enclosed with

this product, or contact your local Texas Instruments

retailer/distributor.

Produktspezifikationen

Marke:	Texas Instruments
Kategorie:	Taschenrechner
Modell:	TI-10
Produktfarbe:	Mehrfarbig
Typ:	Wissenschaftlicher Taschenrechner
Formfaktor:	Tasche
Textzeilen:	2 Zeilen
Stellen:	11 Ziffern