Tennsco J1842A-SND Bedienungsanleitung
Tennsco
Kleiderschrank
J1842A-SND
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂźr Tennsco J1842A-SND (4 Seiten) in der Kategorie Kleiderschrank. Dieser Bedienungsanleitung war fĂźr 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
GENERAL SAFETY INFORMATION
Some parts may have sharp edges. CARE must be taken when handling
For safety, wear a pair of work gloves when assembling or performing a
LIMITED WARRANTY
Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the
in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modiîcation or repair by person
shipment, or where the date stamps on the goods have been defaced, modiîed or removed. UNLESS CONSIDERED UNENFORCEABLE
a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A
b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT
EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the
goods to Seller for inspection on Sellerâs premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty
and are returned within the warranty period stated above.
PK-2310918
ASSEMBLY INSTRUCTIONS & PARTS MANUAL
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE
Jumbo Counter-Height Storage Cabinet
Unassembled Models J1842A-N & J2442A-N
Tennsco LLC., Dickson, TN 37056-1888 ⢠(866) 446-8686
LOAD CAPACITIES PER SHELF LEVEL
48w x 18d
48w x 24d
400 lbs.
400 lbs.
UNIT SIZE WEIGHT CAPACITY
EVENLY DISTRIBUTED
ASSEMBLY OF J1842A-N OR J2442A-N CABINET
Tools Needed: A free 11/ â nut driver is included with each Tennsco cabinet. 32
Two people are recommended for assembly. Approximate assembly time: 20-30 minutes.
2. Place the back panels (Ref. No. 1) on a smooth surface,
making sure that the îanges of both panels are facing up.
Overlap the right panel over the left anel. After aligning the
holes, bolt the two panels tightly together with four bolts
and nuts (Ref. Nos. 17 & 18).
1. The reference numbers used throughout this sheet refer to
the illustration on the back cover. This is to help you to
identify the various parts as they are mentioned.
3. Attach the left side (Ref. No. 2) to the back by placing îange
(A) around the back and bolting tightly together with four
bolts and nuts. Be sure that the lances on all the shelf
adjustment strips (B) point in the same direction.
5. Attach the right side (Ref. No. 3) to the back in the same
manner as you did in step 3, again making sure that
the îange is around the back and that the lances on
the shelf adjustment strips are pointed in the same
direction as those on the back and left side. Push the
side panel up so the studs in the top go through the holes
in the top îange of the side and fasten with three nuts.
6. Attach the sill (Ref. No. 4) to the sides. Place a nut
(Ref. No. 19) loosely on each of the studs and slide
the ends of the sill into the slots on both sides of the
unit. Then, securely tighten the nuts.
4. Attach the top (Ref. No. 8) to the unit by sliding the outer
îange over the back of the unit and the side îange to the
side panel on the unit. The threaded studs should go
through the holes in the top îange
of the side and fasten with
three nuts. Attach the
back to the top
using four
bolts and nuts.
All lances point UP on
the back and side.
B
Flange faces upward.
Flange goes
under back.
A
Slide ends into the slots on
the bottom of the sides.
7. Place the rear îange of the bottom shelf (Ref. No. 5)
into the bottom lances of the back. The îange with two
holes should face the front, hanging over the sill.
Nuts places loosely
on studs of the sill.
Insert the bottom into the bottom lances.
1. Place the locking handle
(Ref. No. 10) on the right
hand door and fasten with
two #8-32 X 1/4 hex-head
bolts and lock washers,
provided with the handle.
2. Turn the handle to the
open position and
place the locking cam
(Ref. No. 11) over the
square shank of the
door handle. The latch
must be facing downward
as shown. Then place the
locking cotter pin (Ref. No.
13) through the hole of the
square shank.
3. With the handle still in the open position, hook the
locking bars (Ref. No. 9) to the locking cam (see
âAâ at left). Once in position, slowly rotate the door
handle to the closed position so the lock bars
prot rude from the holes at the top and bottom
of the door (shown at right, below).
4. Slide the nylon lock bar
guide inserts (Ref. No.
12) over the lock bar
ends and through the
door slots (see âBâ at
right). Push down îrmly
until the guides snap
into place.
5. Attach the âdummyâ handle
(Ref. No. 14) using two
#8-32 X 1/4 hex-head bolts
and lock washers.
Handle/Locking System Installation
A
B
B
8. Set the unit upright. Insert the second shelf at the desired
level. Be sure that the îange with the two holes should
face the front.
10. Cabinet must be level for doors to
open and close properly. Insert a
îathead screwdriver into the two
leveling holes and turn the screws
until the cabinet is level. The cabinet
is now ready for use.
NOTE: In order to place the shelf, you must ďŹrst tilt
the shelf slightly to the left or right before inserting
into the unit.
9. Attach the left door (Ref. No. 6) to the unit by placing the
door on the hinges, aligning the hinge holes, placing the
hinge pins (Ref. No. 15) into the slots and tapping them in
until secure. Attach the right door (Ref. No. 7) to the unit
in the same manner as the left door.
Produktspezifikationen
| Marke: | Tennsco |
| Kategorie: | Kleiderschrank |
| Modell: | J1842A-SND |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Tennsco J1842A-SND benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Kleiderschrank Tennsco
16 August 2024
14 August 2024
12 August 2024
12 August 2024
11 August 2024
10 August 2024
9 August 2024
9 August 2024
9 August 2024
9 August 2024
Bedienungsanleitung Kleiderschrank
- Kleiderschrank HP
- Kleiderschrank Powerfix
- Kleiderschrank IKEA
- Kleiderschrank Bush
- Kleiderschrank WOOOD
- Kleiderschrank GĂźde
- Kleiderschrank Kwantum
- Kleiderschrank Leen Bakker
- Kleiderschrank Livarno
- Kleiderschrank Ordex
- Kleiderschrank Profijt Meubel
- Kleiderschrank Tvilum
- Kleiderschrank United Office
- Kleiderschrank Habitat
- Kleiderschrank Foppapedretti
- Kleiderschrank JYSK
- Kleiderschrank BoConcept
- Kleiderschrank Bopita
- Kleiderschrank Flexa
- Kleiderschrank KidKraft
- Kleiderschrank Nolte
- Kleiderschrank Parisot
- Kleiderschrank Talgø
- Kleiderschrank Vipack
- Kleiderschrank Wehkamp
- Kleiderschrank Zuiver
- Kleiderschrank Miomare
- Kleiderschrank Woonexpress
- Kleiderschrank Bruynzeel
- Kleiderschrank Tiger
- Kleiderschrank Paidi
- Kleiderschrank Pali
- Kleiderschrank Safco
- Kleiderschrank APC
- Kleiderschrank Kirkton House
- Kleiderschrank Silver Cross
- Kleiderschrank Dutchbone
- Kleiderschrank Livarno Lux
- Kleiderschrank Butler
- Kleiderschrank Hooker
- Kleiderschrank BDI
- Kleiderschrank Calligaris .com
- Kleiderschrank Toomax
- Kleiderschrank Gladiator
- Kleiderschrank Arthur Berndt
Neueste Bedienungsanleitung fĂźr -Kategorien-
13 Oktober 2024
7 Oktober 2024
6 Oktober 2024
4 Oktober 2024
4 Oktober 2024
4 Oktober 2024
4 Oktober 2024
4 Oktober 2024
4 Oktober 2024
3 Oktober 2024