Tennsco 1870 Bedienungsanleitung

Tennsco Kleiderschrank 1870

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tennsco 1870 (4 Seiten) in der Kategorie Kleiderschrank. Dieser Bedienungsanleitung war für 28 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

GENERAL SAFETY INFORMATION

Some parts may have sharp edges. CARE must be taken when handling

For safety, wear a pair of work gloves when assembling or performing a

LIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the

in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modication or repair by person

shipment, or where the date stamps on the goods have been defaced, modied or removed. UNLESS CONSIDERED UNENFORCEABLE

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT

EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.

NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the

goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty

and are returned within the warranty period stated above.

PK-1810918

ASSEMBLY INSTRUCTIONS & PARTS MANUAL

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE

Deluxe Storage Cabinet

Unassembled Models 1870 & 2470

Tennsco LLC., Dickson, TN 37056-1888 • (866) 446-8686

LOAD CAPACITIES PER SHELF LEVEL

36w x 18d

36w x 24d

200 lbs.

UNIT SIZE WEIGHT CAPACITY

EVENLY DISTRIBUTED

ASSEMBLY OF 1870 OR 2470 CABINET

Tools Needed: A free 11/ ” nut driver is included with each Tennsco cabinet. 32

Two people are recommended for assembly. Approximate assembly time: 20-30 minutes.

2. Place the cabinet back (Ref. No. 1) on a protected surface

to prevent scratching the paint. The ange on the bottom of

the back should be facing upward.

1. The reference numbers used throughout this sheet refer to

the illustration on the back cover. This is to help you to

identify the various parts as they are mentioned.

3. Attach the left side (Ref. No. 2) to the back by placing

ange (A) around the back and bolting it together

with seven bolts and nuts Ref. Nos. 15 & 16). Be sure that

the lances on all shelf adjustment strips (B) point in the

same direction.

5. Insert one shelf (Ref. No. 4) into the approximate center

of the unit, inserting the shelf edges into the lances on

all four shelf adjustment strips. Be sure that the channeled

edge of the shelf is toward the cabinet front.

6. Place the top (Ref. No. 5) onto the unit. Be sure that the

anges tuck inside the cabinet sides and back. Secure

with eleven nuts and bolts. The front part of the top will

bolt into place in step 8.

4. Attach the right side (Ref. No. 3) to the back in the same

manner as in step 3, again making sure that the ange

is around the back and that the lances on the shelf

adjustment strips are pointed in the same direction as those

on the back and left side.

7. With both doors in the closed position, lift the door

and frame assembly (Ref. No. 6) and place it over the

cabinet body. Be aware that the door latches have not

yet been attached,

All lances point UP on

the back and side.

Flanges

face upward

so the doors could

potentially swing

open if the door

frame is held in

an upsidedown

position. The

door frame should

cover the outside

edges of the

entire storage

cabinet front.

NOTE: When bolting the unit together, leave

the bolts slightly loose until Step 10, unless

otherwise speciﬁed.

Flange faces upward.

Flange goes

under back.

1. Place the locking handle

(Ref. No. 9) on the right

hand door and fasten with

two #8-32 X 1/4 hex-head

bolts and lock washers,

provided with the handle.

2. Turn the handle to the

open position and

place the locking cam

(Ref. No. 10) over the

square shank of the

door handle. The latch

must be facing downward

as shown. Then place the

locking cotter pin (Ref. No.

12) through the hole of the

square shank.

3. With the handle still in the open position, hook the

locking bars (Ref. No. 8) to the locking cam (see

“A” at left). Once in position, slowly rotate the door

handle to the closed position so the lock bars

prot rude from the holes at the top and bottom

of the door (shown at right, below).

4. Slide the nylon lock bar

guide inserts (Ref. No.

11) over the lock bar

ends and through the

door slots (see “B” at

right). Push down rmly

until the guides snap

into place.

5. Attach the “dummy” handle

(Ref. No. 13) using two

#8-32 X 1/4 hex-head bolts

and lock washers.

Handle/Locking System Installation

8. With the door and frame assembly in place, attach it

securely to the unit by opening each

door, one at a time, and securing

the frame assembly using

two bolts and twenty

nuts. This will

require attaching

nuts to the

nine pre-welded

studs along

each side, plus

two bolts and

nuts along the top.

Using two people, set the unit upright and tighten all nuts

around the entire unit. Insert the remaining shelves at your

desired levels. The shelf you inserted earlier may also be moved

to a different level if desired.

10.

Two holes

must be in front.

Insert shelf

into bottom lances.

Levelers

Access Holes

11. The cabinet must be

level in order for the

doors to close properly.

Levelers may be adjusted

by placing the nut driver

through the hole in each

end of the sill and adjusting

the leveling screw.

NOTE: In order to place

the shelves, you must

ﬁrst tilt the shelf slightly

to the left or right before

inserting it into the unit.

9. Place the the bottom (Ref. No. 7) in the lowest notch of the

shelf adjusting strips on the back. Make sure the ange with

two holes faces the front, and that it is over the ange of the

frame sill. If necessary, you may

push out on the side

walls to

enable

the bottom

to more

easily slide

into position. Attach

the shelf securely by bolting

the bottom to the frame sill

with two bolts and nuts.

Produktspezifikationen

Marke:	Tennsco
Kategorie:	Kleiderschrank
Modell:	1870

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tennsco 1870 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Kleiderschrank Tennsco

Tennsco J1878C-N Bedienungsanleitung

16 August 2024

Tennsco CVD7214 Bedienungsanleitung

14 August 2024

Tennsco JSD2478SU Bedienungsanleitung

12 August 2024

Tennsco CVD1472 Bedienungsanleitung

12 August 2024

Tennsco 7814 Bedienungsanleitung

11 August 2024

Tennsco 2472 Bedienungsanleitung

10 August 2024

Tennsco 1471 Bedienungsanleitung

9 August 2024

Tennsco CVD1480 Bedienungsanleitung

9 August 2024

Tennsco 1442 Bedienungsanleitung

9 August 2024

Tennsco 3624 Bedienungsanleitung

9 August 2024

Bedienungsanleitung Kleiderschrank

Neueste Bedienungsanleitung für -Kategorien-

Livarno IAN 290568 Bedienungsanleitung

13 Oktober 2024

Livarno IAN 111178 Bedienungsanleitung

7 Oktober 2024

Livarno IAN 277967 Bedienungsanleitung

6 Oktober 2024

IKEA HAVBÄCK 105.351.67 Bedienungsanleitung

4 Oktober 2024

IKEA STOREDAMM 305.761.66 Bedienungsanleitung

4 Oktober 2024

IKEA TREASJÖN 705.800.53 Bedienungsanleitung

4 Oktober 2024

IKEA HAVBÄCK 205.351.76 Bedienungsanleitung

4 Oktober 2024

JYSK Aulum (96x80x45) Bedienungsanleitung

4 Oktober 2024

Livarno IAN 104023 Bedienungsanleitung

4 Oktober 2024

IKEA EKET 405.745.86 Bedienungsanleitung

3 Oktober 2024