Tennsco 1436 Bedienungsanleitung
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂźr Tennsco 1436 (4 Seiten) in der Kategorie Schrank. Dieser Bedienungsanleitung war fĂźr 38 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
GENERAL SAFETY INFORMA
GENERAL SAFETY INFORMA
GENERAL SAFETY INFORMA
GENERAL SAFETY INFORMATION
TION
TION
TIONGENERAL SAFETY INFORMATION
Some parts may have sharp edges. CARE must be taken when handling
For safety, wear a pair of work gloves when assembling or performing a
LIMITED WARRANTY
LIMITED WARRANTY
LIMITED WARRANTY
LIMITED WARRANTYLIMITED WARRANTY
Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the
in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modiîcation or repair by person
shipment, or where the date stamps on the goods have been defaced, modiîed or removed. UNLESS CONSIDERED UNENFORCEABLE
a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A
b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT
EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the
goods to Seller for inspection on Sellerâs premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty
and are returned within the warranty period stated above.
PK-1451119
ASSEMBLY INSTRUCTIONS & PARTS MANUAL
RET
RET
RET
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE
AIN INSTRUCTIONS FOR FUTURE REFERENCE
AIN INSTRUCTIONS FOR FUTURE REFERENCE
AIN INSTRUCTIONS FOR FUTURE REFERENCE RETAIN INSTRUCTIONS FOR FUTURE REFERENCE
36â High Standard Storage Cabinet
Unassembled Models 1436 & 2436
Tennsco LLC., Dickson, TN 37056-1888 ⢠(866) 446-8686
LOAD CAP
LOAD CAP
LOAD CAP
LOAD CAPACITIES PER SHELF LEVEL
ACITIES PER SHELF LEVEL
ACITIES PER SHELF LEVEL
ACITIES PER SHELF LEVELLOAD CAPACITIES PER SHELF LEVEL
36w x 18d 200 lbs.
UNIT SIZE
UNIT SIZE
UNIT SIZE
UNIT SIZEUNIT SIZE WEIGHT CAP
WEIGHT CAP
WEIGHT CAP
WEIGHT CAPACITY
ACITY
ACITY
ACITYWEIGHT CAPACITY
EVENL
EVENL
EVENL
EVENL
Y DISTRIBUTED
Y DISTRIBUTED
Y DISTRIBUTED
Y DISTRIBUTEDEVENLY DISTRIBUTED
36w x 24d 200 lbs.
ASSEMBLY OF 1436 OR 2436 CABINET
Tools Needed: A free 11/ â nut driver is included with each Tennsco cabinet. 32
Two people are recommended for assembly. Approximate assembly time: 20-30 minutes.
2. Place the cabinet back (Ref. No. 1) on a protected surface
to prevent scratching the paint. The îange on the bottom of
the back should be facing upward.
1. The reference numbers used throughout this sheet refer to
the illustration on the back cover. This is to help you to
identify the various parts as they are mentioned.
3. Attach the left side (Ref. No. 2) to the back by placing
îange (A) around the back and bolting the back and side
together with four bolts and nuts (Ref. Nos. 17 & 18). Be
sure that the lances on all shelf adjustment strips (B) point in
the same direction.
5. Attach the right side (Ref. No. 3) to the back in the same
manner as you did in step 3, again making sure that the
îange is around the back and that the lances on the
shelf adjustment strips are pointed in the same direction
as those on the back and left side. Push the side panel up
so the studs in the top
go through the
holes in the
top îange of
side and
fasten with
three nuts.
6. Attach the sill (Ref. No. 6) to the sides. Place nuts
loosely on each of the studs and slide the ends of the
sill into the slots on both sides of the unit. Then,
securely tighten the nuts.
4. Attach the top (Ref. No. 5) to the unit by sliding the outer
îange over the back of the unit and the side îange to the
side panel on the unit. The threaded studs should go
through the holes in the
top îange of the
side and fasten
with three nuts.
Attach the back
to the top using
four bolts
and nuts.
All lances point UP on
the back and side.
B
B
B
B
B
Flange faces upward.
Flange goes
under back.
A
A
A
AA
7. Place the rear îange of the bottom (Ref. No. 9) into the
bottom lances of the back. The îange with two holes should
face the front, hanging over the sill. Insert bolts through the
bottom and sill with the head facing the front of the unit.
Secure with
two nuts.
Insert shelf into the
bottom lances.
1. Place the locking handle
(Ref. No. 11) on the right
hand door and fasten with
two #8-32 X 1/4 hex-head
bolts and lock washers,
provided with the handle.
2. Turn the handle to the
open position and
place the locking cam
(Ref. No. 12) over the
square shank of the
door handle. The latch
must be facing downward
as shown. Then place the
locking cotter pin (Ref. No.
14) through the hole of the
square shank.
3. With the handle still in the open position, hook the
locking bars (Ref. No. 10) to the locking cam (see
âAâ at left). Once in position, slowly rotate the door
handle to the closed position so the lock bars
prot rude from the holes at the top and bottom
of the door (shown at right, below).
4. Slide the nylon lock bar
guide inserts (Ref. No.
13) over the lock bar
ends and through the
door slots (see âBâ at
right). Push down îrmly
until the guides snap
into place.
Handle/Locking System Installation
A
B
B
9. Insert the shelves
(Ref. No. 4) at the
desired levels.
10. Attach the left door (Ref. No. 7) to the unit by placing the
door on the hinges, aligning the hinge holes, dropping the
pins into the slots, then placing the îat end of a
screwdriver on the hinge pins
(Ref. No. 15) and
tapping them in with
a hammer.
8. Set the unit upright and tighten all the nuts and bolts
around the entire unit.
NOTE: In order to
place the shelves, you
must ďŹrst tilt the shelf
slightly to the left or right
before inserting it into the unit.
11. Attach the right door (Ref. No. 8) to the unit in the same
way you attached the left door.
Leveler
Access Holes
12. The cabinet must be level in order for the doors to close
properly. Levelers may be adjusted by placing the nut driver
through the hole in each end of the sill and adjusting the
leveling screw.
Produktspezifikationen
| Marke: | Tennsco |
| Kategorie: | Schrank |
| Modell: | 1436 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Tennsco 1436 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schrank Tennsco
18 April 2024
26 März 2024
11 März 2024
17 Januar 2024
16 August 2023
5 Juni 2023
Bedienungsanleitung Schrank
- Schrank Siemens
- Schrank IKEA
- Schrank Bush
- Schrank WOOOD
- Schrank GĂźde
- Schrank Leen Bakker
- Schrank Livarno
- Schrank MADE
- Schrank Ordex
- Schrank Sencys
- Schrank Tvilum
- Schrank Foppapedretti
- Schrank JYSK
- Schrank BoConcept
- Schrank Bopita
- Schrank Parisot
- Schrank Rauch
- Schrank Talgø
- Schrank Vroomshoop
- Schrank Miomare
- Schrank Marantz
- Schrank Milwaukee
- Schrank Paidi
- Schrank APC
- Schrank Handson
- Schrank Gami
- Schrank StarTech.com
- Schrank Livarno Lux
- Schrank BDI
- Schrank Empire
- Schrank Urrea
- Schrank Bbf
Neueste Bedienungsanleitung fĂźr -Kategorien-
20 August 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
5 Juni 2024
27 Mai 2024
25 Mai 2024
22 Mai 2024
19 Mai 2024