Tellur Argo TLL511241 Bedienungsanleitung

Tellur Headset Argo TLL511241

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Tellur Argo TLL511241 (7 Seiten) in der Kategorie Headset. Dieser Bedienungsanleitung war fĂŒr 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
ARGO BLUETOOTH HEADSET
TLL511241- User manual
Technical speciïŹcations
Bluetooth version: v5.0
Wireless range: 10 m
Frequency: 2.4GHz, Class 2
Supported profiles: HFP1.6, HSP, Voice prompts, A2DP,
AVRCP, iOS battery state monitor
Multipoint technology: Pair and maintain connection with two
phones, answer calls from either phone
Talk time: Up to 6 hours
Music play time: Up to 5.5 hours
Standby time: Up to 135 hours
Charging time: 2 hours
Bluetooth pairing name: Tellur Argo
Product dimensions: 60 x 11 x 21mm
Product weight: 7g
Quick Start
The headset contains the following parts:
1. LED indicator (red and blue)
2. Multifunctional button (MFB)
3. Charging port
4. Microphone
5. Earpiece
6. Ear gel
Fully charge the headset before using. For charging details,
please refer to "Charger and Battery" in this manual.
Meanwhile, choose the compatible cell phone or other
Bluetooth devices for pairing. For details about pairing,
please refer to "Basic Operations".
Tips: Keep the headset away from your credit card or other
magnetic storage media; otherwise, the stored information
may be lost due to demagnetization.
Basic Operations
Power on and pairing:
To power on the headset, long press the button until the LED
indicator ïŹ‚ashes blue, then release the button. The headset
will prompt you with a voice notiïŹcation “Power on”. The
headset enters pairing mode automatically and will notify you
through a voice prompt “Pairing”, while the LED indicator will
ïŹ‚ash alternatively in red and blue.
If pairing doesn’t occur within 180 seconds, the headset
automatically shuts down, the LED indicator will turn red and
a voice prompt “Power off” will be heard.
Connecting: Turn on your mobile phone’s Bluetooth and
search for the Bluetooth headset’s name: Tellur Argo. Select
Tellur Argo and input password 0000 if prompted to (if the
Bluetooth version is V2.1 or higher, no need to input the
password).
Answer a call: When receiving a call, the headset will prompt
you with a voice notiïŹcation “Incoming call”, followed by the
number that calls you. To answer the call, short press the
multifunctional button (MFB).
Reject a call: To reject an incoming call, long press the MFB
key and release when you hear the buzzer tone.
End a call: When in talking mode, short press the MFB key to
end the call.
Talking switcher: When talking via Bluetooth headset, press
the MFB twice to switch to the mobile phone talk. Repeat the
above operation to redirect the call back to the Bluetooth
headset.
Redial last number: When in a standby mode, press the MFB
key twice to redial the last called number.
Multipoint Function Operating:
Pair the headset with Phone A following the steps described in
the “Connecting” section, then turn off the Bluetooth on the
Phone A and the headset at the same time. Turn on the


Produktspezifikationen

Marke: Tellur
Kategorie: Headset
Modell: Argo TLL511241

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tellur Argo TLL511241 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Headset Tellur

Bedienungsanleitung Headset

Neueste Bedienungsanleitung fĂŒr -Kategorien-