Teledex A110 Bedienungsanleitung

Teledex Telefon A110

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Teledex A110 (8 Seiten) in der Kategorie Telefon. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

users

guide

Covers models: A100, A101, A102, A103, A105,

A110, A110S; A205, A205S, A210S

REQUIREMENTS OF PART FCC RULES68 -

This equipment complies with Part 68 of the FCC Rules and the requirements adopted by ACTA. On the bottom of this

telephone is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX.

If requested, this number must be provided to the telephone company. The USOC Jack for this equipment is RJ11C.

A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the

applicable FCC Part 68 rules and requirements adopted by ACTA. A compliant telephone cord and modular plug are

provided with this telephone. It is designed to be connected to a compatible modular jack that is also compliant. See

installation instructions for details.

The Ringer Equivalence Number (REN) is used to determine the number of devices that may be connected to a tele-

phone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call.

In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that

may be connected to a line, as determined by the total RENs, contact the local telephone company. For products

approved after July 23, 2001, the REN for this product is a part of the product identifier that has the format

US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).

For earlier products, the REN is separately shown on the label.

If this telephone causes harm to the telephone network, the telephone company will notify you in advance that tempo-

rary discontinuance of service may be required. But if advance notice is not practical, the telephone company will noti-

fy the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you

believe it is necessary.

The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the

operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to

make the necessary modifications to maintain uninterrupted service.

If trouble is experienced with this equipment, for repair or warranty information, please contact Teledex at (800) 794-

8353. If the equipment is causing harm to the telephone network, the telephone company may request that you dis-

connect the equipment until the problem is resolved.

There are no user serviceable parts contain in this equipment.

Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service

commission or corporation commission for information.

If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this (insert

equipment ID) does not disable your alarm equipment. If you have questions about what will disable alarm equipment,

consult your telephone company or a qualified installer.

This telephone receiver is hearing aid compatible.

INDUSTRY OF CANADA REQUIREMENTS

NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Speciﬁcations.

This is conﬁrmed by the registration number. The abbreviation, IC, before the registration number signiﬁes that

registration was performed based on a Declaration of Conformity indicating that Industry Canada technical speci-

fications were met. It does not imply that Industry Canada approved the equipment.”

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the

local telecommunications company. The equipment must also be installed using an acceptable method of connec-

tion. The customer should be aware that compliance with the above conditions may not prevent degradation of

service in some situations.

Repairs to certiﬁed equipment should be coordinated by a representative designated by the supplier. Any repairs

or alterations made by a user to this equipment, or equipment malfunctions, may give the telephone communica-

tions company cause to request the user to disconnect the equipment.

Users should ensure for their own protection, that the electrical ground connections of the power utility, telephone

lines and internal metallic water pipe system, if present, are connected together. This precaution may be particu-

larly important in rural areas”.

Caution: Users should not attempt to make such connections themselves, but should contact the appropriate elec-

tric inspection authority, or electrician, as appropriate.”

“NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the

maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface

may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence

Numbers of all the devices does not exceed 5.”

REN: Z

For warranty and service in Canada, please contact:

Williams Telecommunications

5610 Kennedy Road

Mississauga, Ontario, L4Z2A9

Canada

Phone: 905-712-4242

Fax: 905-712-1754

CONTACTING TELEDEX

Telephone: (408) 363-3100

Internet: www.teledex.com

email: sales@teledex.com

Mail: 6311 San Ignacio Avenue

San Jose, CA USA 95119

INCLUDED IN YOUR PACKAGE

Handset Line Cord

Base Unit Clear Plastic Overlay

Coiled Handset Cord User Guide

CONNECTING THE IPHONE A SERIES

1) Located on the left side of the iPhone (as the phone is facing you) is a modular

jack. Insert one end of the coiled handset cord into this jack (you should hear the coil

cord click when properly inserted).

2) Insert the other end of the coiled handset cord into the modular jack on the handset.

3) Turn the telephone so the back panel is facing you. Insert either end of the line cord

into the jack on the back of the telephone labeled LINE.

4) Insert the other end of the line cord into a telephone wall outlet jack.

5) Once your telephone is connected, remove the plastic overlay and place the paper face

plate over the keys. Replace the plastic overlay by hooking the tabs on the overlay into

the recessed slots located on both sides.

PLACING A CALL USING THE HANDSET

1) Lift the handset. The “LINE” LED will illuminate. (On two-line models, if both lines

are inactive, line 1 will be activated. If one of the two lines is active, the inactive line

will be activated.)

2) Listen for dial tone. Dial the desired number, or press an AUTO DIAL key to

automatically dial a number.

3) To end the call, hang up by placing the handset back in the cradle.

PLACING A CALL USING THE SPEAKERPHONE

(APPLIES ONLY TO MODELS WITH INCLUDED SPEAKERPHONE)

1) With the handset in the cradle, press either the SPEAKER key or the LINE key (on

two-line models, select either inactive LINE key). The telephone will go offhook on

the selected line with speakerphone active.

2. Listen for dial tone, and dial the desired number, or press an AUTO DIAL key to

automatically dial a number.

3. To end the call, press the SPEAKER key.

RECEIVING A CALL

TO ANSWER A CALL USING THE HANDSET:

1. Lift the handset. On two-line models, if one line is already in use, the iPhone will

automatically select the ringing line.

2. To end the call hang up the handset.

TO ANSWER A CALL USING THE SPEAKERPHONE

1. With the handset in the cradle, press the line key associated with the ringing line.

The iPhone will asnwer the line selected with the speakerphone active. You may also:

2. Press the SPEAKER key. The iPhone will select the ringing line and answer with the

speakerphone active.

NOTE THE RED LED WILL INDICATE THAT THE SPEAKERPHONE IS ACTIVE: SPEAKER .

Produktspezifikationen

Marke:	Teledex
Kategorie:	Telefon
Modell:	A110

Brauchst du Hilfe?

Wenn Sie Hilfe mit Teledex A110 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Telefon Teledex

Teledex A110 Bedienungsanleitung

7 September 2024

Teledex SIP ND2105 Bedienungsanleitung

18 August 2024

Teledex SIP LD4210S Bedienungsanleitung

18 August 2024

Teledex SIP ND2105S Bedienungsanleitung

18 August 2024

Teledex SIP ND2110 Bedienungsanleitung

18 August 2024

Teledex SIP ND2110S Bedienungsanleitung

18 August 2024

Teledex SIP LD4105S Bedienungsanleitung

18 August 2024

Teledex Opal 1003 Bedienungsanleitung

18 August 2024

Teledex SIP LD4205S Bedienungsanleitung

18 August 2024

Teledex Opal 1010S Bedienungsanleitung

18 August 2024

Bedienungsanleitung Telefon

Neueste Bedienungsanleitung für -Kategorien-

Gigaset SL370 Bedienungsanleitung

15 Oktober 2024

Profoon PDX-7020 Bedienungsanleitung

15 Oktober 2024

Profoon PDX-100 Bedienungsanleitung

14 Oktober 2024

Uniden XS 1415 Bedienungsanleitung

13 Oktober 2024

Uniden XDECT 6105BTU Bedienungsanleitung

11 Oktober 2024

OnePlus 9RT 5G Bedienungsanleitung

9 Oktober 2024

Profoon PDX-1520 Bedienungsanleitung

7 Oktober 2024

MT Logic TE-5740MTWG Bedienungsanleitung

7 Oktober 2024

D-Link DI-102 Bedienungsanleitung

6 Oktober 2024

Belgacom Specifics 100 Bedienungsanleitung

5 Oktober 2024