Tecmate Optimate Lithium - TM291 Bedienungsanleitung

Tecmate Ladegerät Optimate Lithium - TM291

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tecmate Optimate Lithium - TM291 (52 Seiten) in der Kategorie Ladegerät. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/52
INSTRUCTIONS FOR USE
IMPORTANT: Read completely
before charging
MODE D’EMPLOI
IMPORTANT: Ă  lire avant
d’utiliser l’appareil
MODO DE EMPLEO
IMPORTANTE: a leer antes de
utilizar el aparato
1 x 12.8V (4 x 3.2V cells) LiFePO4
Lithium Iron Phosphate
2.5 - 100Ah (charge within 24 hours)
+-
MODEL: TM290, TM291
AC: 100 – 240VAC 50-60Hz
DC: 60W ¨ 5A @ 12V
Thermally adjusted
1
x
128V(4x32Vcells) LiFeP
O
ANWENDUNGSVORSCHRIFTEN
WICHTIG: Vollständig vor der
Benutzung lesen
GEBRUIKSAANWIJZING
BELANGRIJK: Lees volledig voor
gebruik
INSTRUÇÕES DE UTILIZAÇÃO
IMPORTANTE: Ler antes de
utilizar.
ISTRUZIONI PER L’USO
IMPORTANTE: da leggere prima
di utilizzare l’apparecchio
INSTRUKTIONER
VIKTIGT: läs fÜljande fullständiga
instruktioner fÜr användningen
innan du använder laddaren
Automatic charger for 12.8V LiFePO4 batteries • Chargeur automatique
pour batteries 12.8V LiFePO4 • Cargador automático para baterías 12.8V
LiFePO4 • Carregador automático para baterias de 12.8V LiFePO4 •
Automatische Ladegerät für 12.8V LiFePO4 Batterien • Automatische lader
voor 12.8V LiFePO4 accu’s • Caricabatterie automatico per batterie 12.8V
LiFePO4 • Automatisk diagnostisk laddare för 12.8V LiFePO4-batterier
SAVESAVE
safeTÂşsafeTÂş
CHARGE
OPTIMIZE
2
1
AC:100-240V
REVERSE
POLARITY
CONNECTION
BRIGHT
charging
LOW
Eco mode
88
77
66
TEST MAINTAIN
Results per
illustration 2
5
4
3
OPTIMIZE
nal 20%
equalize
CHARGE
from 12.8V
to 14.3V
SAVE
from 0.5V
to 12.8V
LED MODE
FLASHING - - - -
100% ON
LED indications (illustration 1)
Early warning of battery problems / Avertissement anticipĂŠ des
problèmes de batterie (illustration 2)
TEST
V
OLTS 10 12.73 12.99
13.13
13.30
%
0.5
+90%61-90%11-30%
VOLTAGE RETENTION TEST / TEST DE R
É
TENTION DE VOLTAGE
31-60%
0-10%
- - -
3
IMPORTANT SAFETY
INSTRUCTIONS
THIS PORTION OF THE MANUAL CONTAINS IMPORTANT SAFETY INSTRUCTIONS FOR THE
OPTIMATE LITHIUM BATTERY CHARGER. IT IS OF THE UTMOST IMPORTANCE THAT EACH
TIME, BEFORE USING THE CHARGER, YOU READ AND EXACTLY FOLLOW THESE
INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
AUTOMATIC CHARGER FOR 12.8V LIFEPO4 (LITHIUM IRON PHOSPHATE )
BATTERIES. DO NOT USE FOR NiCd, NiMH, Lead-Acid or any other type
of Li-Ion OR NON-RECHARGEABLE BATTERIES.
1. CAUTION : CLASS II APPLIANCE. DO NOT CONNECT TO GROUND.
2. Do not expose charger to rain or snow.
3. Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock,or injury to
persons.
4. To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger.
5. An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result
in a risk of fire and electric shock.If extension cord must be used make sure that :
a) pins on plug of extension cord are the same number, size and shape as those of plug on charger.
b) the extension cord is property wired and in good electrical condition,and
c) the conductor wire size is large enough for the AC ampere rating of the charger as specified in the table below.
AC INPUT RATING IN AMPERES
Equal to or greater than But less than LENGTH OF CORD,
FEET (m) AWG SIZE
OF CORD
2A 3A 25 (17.6)
50 (15.2)
100 (30.5)
18
18
14
6. Do not operate charger with damaged cord or plug - replace the cord or plug immediately.
7. Do not operate charger if it has received a sharp blow, been dropped,or otherwise damaged in any way; take it
to a qualified serviceman.
8. Do not disassemble charger; take it to a qualified serviceman when service or repair is required.
Incorrect reassembly may result in a risk of electric shock or fire.
9. To reduce risk of electric shock, unplug the charger from outlet before attempting any maintenance or cleaning.
Turning off controls will not reduce this risk.Clean only with slightly moist,not wet, cloth.Do not use solvents.
10. WARNING - RISK OF EXPLOSION.
a) WORKING IN VICINITY OF A Lithium Iron Phosphate BATTERY IS DANGEROUS. BATTERY TEMPERATURE (measured at the battery)
INCREASE DURING NORMAL BATTERY OPERATION AND DURING CHARGING AND THERE IS A RISK OF EXPLOSION IF THE BATTERY IS
OVERCHARGED.
b) Lithium Iron Phosphate BATTERIES HAVE A LIMITED SAFE TEMPERATURE RANGE OF -20OC / 4OF TO 85OC / 185OF.
BATTERIES SHOULD NOT BE USED OR CHARGED IF THE BATTERY CASING OR ENVIRONMENT TEMPERATURE IS OUTSIDE OF THIS RANGE.
FOR THIS REASON, IT IS OF UTMOST IMPORTANCE THAT YOU FOLLOW THE INSTRUCTIONS EACH TIME YOU USE THE CHARGER.
b) To reduce risk of battery explosion, follow these instructions and those published by the battery manufacturer and manufacturer of any
equipment you intend to use in vicinity of the battery. Review cautionary marking on these products and on engine.
11. PERSONAL PRECAUTIONS.
a) Someone should be within range of your voice OR close enough to come to your aid when you work near a Lithium Iron Phosphate
battery.
b) Have plenty of fresh water and soap nearby in case battery contents contacts skin, clothing or eyes.
c) Wear complete eye protection and clothing protection. Avoid touching eyes while working near battery.
d) If battery contents contacts or enters eye, flood eye with cold running water for at least 10 minutes and get medical
attention immediately. If battery contents contacts skin or clothing, wash immediately with soap and water. If battery content enters
an eye , immediately flood eye with running cold water for at least 10 minutes and get medical attention immediately.
e) NEVER smoke or allow a spark or flame in vicinity of battery or engine.
f) Be extra cautious to reduce risk of dropping a metal tool onto battery. It might spark or short-circuit battery or other electrical part
that may cause explosion.
g) Remove personal metal items such as rings, bracelets ,necklaces , and watches when working with a Lithium Iron Phosphate
battery. A Lithium Iron Phosphate battery can produce a short-circuit current high enough to weld a ring or the like to metal,
causing a severe burn.
i) NEVER charge a frozen battery.
SAFETY

Produktspezifikationen

Marke: Tecmate
Kategorie: Ladegerät
Modell: Optimate Lithium - TM291

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tecmate Optimate Lithium - TM291 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Ladegerät Tecmate

Tecmate

Tecmate OPTIMATE 5 TM 221 Bedienungsanleitung

27 August 2024
Tecmate

Tecmate Optimate 5 Voltmatic - TM222 Bedienungsanleitung

27 August 2024
Tecmate

Tecmate OPTIMATE 5 TM 220 Bedienungsanleitung

27 August 2024
Tecmate

Tecmate Optimate Lithium - TM290 Bedienungsanleitung

27 August 2024
Tecmate

Tecmate Optimate 3+ Bedienungsanleitung

27 August 2024
Tecmate

Tecmate Optimate Lithium - TM291 Bedienungsanleitung

27 August 2024
Tecmate

Tecmate ACCUMATE PRO Bedienungsanleitung

27 August 2024
Tecmate

Tecmate ACCUMATE Bedienungsanleitung

27 August 2024
Tecmate

Tecmate Optimate Pro 2 Bedienungsanleitung

27 August 2024
Tecmate

Tecmate ACCUMATE PRO 5 Bedienungsanleitung

27 August 2024

Bedienungsanleitung Ladegerät

Neueste Bedienungsanleitung fĂźr -Kategorien-

MSW

MSW S-CHARGER-20A.2 Bedienungsanleitung

16 Oktober 2024
MSW

MSW S-CHARGER-10A.2 Bedienungsanleitung

16 Oktober 2024
ABB

ABB EVLunic Bedienungsanleitung

9 Oktober 2024
Powerplus

Powerplus POWDP9062 Bedienungsanleitung

8 Oktober 2024
Cellular Line

Cellular Line Wireless Power Dock Bedienungsanleitung

7 Oktober 2024
HQ

HQ CHARGER14 Bedienungsanleitung

4 Oktober 2024
Makita

Makita DC18RD Bedienungsanleitung

4 Oktober 2024
HQ

HQ CH02E Bedienungsanleitung

2 Oktober 2024
Venom

Venom VS5007 Bedienungsanleitung

1 Oktober 2024
Venom

Venom VS5010 Bedienungsanleitung

1 Oktober 2024