Technoline WS 7208 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Technoline WS 7208 (10 Seiten) in der Kategorie Wetterstation. Dieser Bedienungsanleitung war fĂĽr 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/10
Holder
Detachable
stand

Weather Station
INTRODUCTION:
Congratulations on purchasing this innovative 433MHz Weather Station which displays the
weather forecast, time, indoor temperature, and up to three outdoor temperature readings.
To enjoy the full benefits of this innovative product, please read this operating manual.
Weather Station:
FEATURES:
DCF radio-controlled time reception
LCD clock in 24 hour time display
Indoor and outdoor temperature reading in degree Celsius (°C)
Indoor and outdoor temperature with Minimum and Maximum records
Weather tendency indicator and weather icons
Can receive up to three Outdoor transmitters
Table standing or wall mountable (detachable table stand)
Temperature Transmitter:
Function Keys
Hanging
hole
SETTING UP:
Please follow these steps to ensure that your new Weather Station works correctly with the
temperature transmitter(s):
1. First, insert 2 x AA, IEC LR6, 1.5V batteries into the Weather Station. Once the
batteries are in place, all segments of the LCD will light up briefly. Then the indoor
temperature, the time as -:--, and the weather icons sun and clouds will be
displayed. If the indoor temperature is not displayed after a few seconds, remove the
batteries and wait for at least 30 seconds before reinserting them. Once the indoor
data is displayed proceed to step 2.
2. Within 1-1/2 minutes of activating the Weather station, place 2 x AAA, IEC LR3, 1.5V
batteries into the transmitter.
3. After a few seconds of inserting the batteries into the transmitter, the Weather
Station will start receiving data from the transmitter. The remote temperature will
then be displayed on the Weather Station. If this does not happen after 2 minutes,
the batteries will need to be removed from both units and reset from step 1.
Battery cover
4. The Weather Station can take up to 3 remote transmitters. If you have purchased
additional transmitters, follow step 2 for all extra transmitters. However, ensure that
you leave 10 seconds in between the reception of the last transmitter and the set-up
of the following transmitter. The Weather Station will number the transmitters in the
order of set-up, i.e. the first transmitter will have the temperature displayed with the
channel number 1 against it and so on.
Battery
compartment
Note:
No channel number will show up if there is only one transmitter used.
Battery cover Battery
compartment
5. When all the transmitters are set up, there is a testing period, during which the
display switches quickly between all the received transmitters at random, according
to which random transmission it receives. Pressing any key will stop this process
and the display will show the temperature for the first transmitter. The process also
stops automatically if no keys are pressed for a few minutes.
6. The DCF-77 time code reception is automatically started just after the Weather
Station is activated. This takes typically between 3 - 5 minutes in good conditions.
This time period is an excellent opportunity to locate the transmitter(s) in suitable
location(s) outdoors. In order to ensure sufficient 433 MHz transmission however,
this should under good conditions be no more than 20 - 25 meters from where the
Weather Station will be finally positioned (see notes on “Positioning” and “433 MHz
Reception”).
7. If after 10 minutes the DCF time has not been received, use the SET key to
manually enter a time initially. The clock will automatically attempt each hour to
receive the DCF time. When this is successful, the received time will override the
manually set time.
Note:
Should the total time of inserting the batteries into the transmitters take longer than 1-1/2
minutes from the time of inserting the batteries into the Weather Station then temperature
reception problems may occur. If the temperature is not being received, then see Checking
for 433 MHz reception, before resetting the units (see Resetting the Weather Station
below).
In the event of changing batteries in any of the units, all units need to be reset by following
the setting up procedures. This is because the transmitter at start-up assigns a random
security code and this code must be received and stored by the Weather Station in the first
1-1/2 minutes of power being supplied to it.
BATTERY CHANGE:
It is recommended to replace the batteries in all units on an annual basis to ensure
optimum accuracy of these units.
Please participate in the preservation of the environment. Return used
batteries to an authorized depot.
LCD SCREEN
The Weather Station’s LCD is split into 5 sections displaying the information for time,
weather forecast, indoors and outdoors.
All the segments will light up momentarily before displaying:
1. Weather Icon
2. Time “-:--“
3. Indoor temperature in degree Celsius (°C)
4. Hidden Max/Min icon for Indoor/Outdoor Temperature and Transmitter Identification
Number
5. Outdoor Temperature in °C


Produktspezifikationen

Marke: Technoline
Kategorie: Wetterstation
Modell: WS 7208

Brauchst du Hilfe?

Wenn Sie Hilfe mit Technoline WS 7208 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Wetterstation Technoline

Bedienungsanleitung Wetterstation

Neueste Bedienungsanleitung fĂĽr -Kategorien-