Techno Line WT 498 Bedienungsanleitung
Techno Line
Alarmton
WT 498
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Techno Line WT 498 (4 Seiten) in der Kategorie Alarmton. Dieser Bedienungsanleitung war fĂĽr 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
INSTRUCTION MANUAL WT 498
INSTALLATION BY AC-ADAPTOR
For best reception of radio controlled signal, keep your clock close to a window and away from
metal surfaces, electrical appliances and magnetic fields. Plug the AC/DC adaptor to an AC
household outlet, then plug the DC jack to the back of the clock. Your clock is ready to work for
you.
INSTALLATION BY BATTERIES
1. Slide open the battery cover at the bottom of your unit.
2. Insert 3 x AAA batteries into the battery compartment by observing the correct + / - polarity
signs inside the battery compartment.
3. Replace the battery cover.
4. In case it is too bright in night time, please only use by batteries / without adaptor.
When only batteries are being used, the always-on backlight is off. Press SNOOZE/LIGHT will
light up the LCD for few seconds to view time if need. If user unplugs the DC jack, the clock
will stop to work and no time / alarm. Please remember to put batteries in the clock if user
wants to unplug it.
DCF SINGAL RECEPTION AND SIGNAL INDICATOR
After your clock is powered up, it starts to receive DCF signal. The icon flashes.
Weak or no DCF signal (only icon flashing)
Receiving strong DCF signal ( icon flashing)
Successful Reception ( icon becomes static)
Failed Reception ( icon disappear)
Automatic reception and Manual Reception
Your clock starts automatic rece 00. If it fails to receive the ption everyday at 1:00, 2:00, 3:
DCF time signal at 3:00, it will start reception at 4:00. If it fails again it will start reception
at 5:00. If it fails again it will start automatic reception at 1:00 again next day.
Manual reception : simply press WAVE button once to start manual reception. Press
and hold 2 seconds to stop manual reception.
Remark : when your clock is receiving radio controlled time signal, all buttons except the
snooze / light button do not work.
TO SET CALENDAR, 12/24 TIME AND TIME
1. Press and hold SET for 2 seconds, time digits change to “24 Hr” and flash, press +/- to
select “12 Hr” time format or “24 Hr” time format.
2. Then press SET once again, time digits change to “00”and flash. Press +/- button to
select time zone:
“00” = GMT +1 hour (e.g. Germany)
“01” = GMT +2 hours (e.g. Finland)
“-01” = GMT 00 hour (e.g. U.K.)
3. Then press SET once again, hour digits flash. Press +/- button to set hour.
4. Then press SET once again, minute digits flash. Press +/- button to set minute.
4. Then press SET once again, time digits change to year “2009” and flash.
Press+/- to set the year.
5. Then press SET once again, month digits flash. Press +/- button to set month.
6. Then press SET once again, date digits flash. Press +/- button to set date.
7. Then press SET once again, day of week digits flash. Press +/- button to select
the language of day of week.
EN = English
GE = German
FR = French
IT = Italian
NE = Dutch
ES = Spanish
DA = Danish
8. Press SET to return to normal mode, or it will return to normal mode in around 30
seconds if no press of any other buttons.
TO SET ALARM TIME
Press and hold ALM SET / ON-OFF once, time digits change to alarm time digits “0:00
AL” and hour digits flash. Then press +/- to set your desired hours of alarm time.
Press ALM SET / ON-OFF once, alarm minute digits flash. Press +/- to set your desired
minutes of alarm time.
Press ALM SET / ON-OFF once to return to normal mode, or it will return to normal mode
in around 30 seconds if no further press of any other buttons.
TO TURN ON OR OFF YOUR ALARM
Press ALM SET / On-Off once to turn on or off the daily alarm. When the alarm function
is turned on, the icon appears between the hour and minute digits.
TO USE SNOOZE ALARM
When time reaches your set alarm time, your clock will give beep sound to wake you up.
The icon will flash.
1) Press SNOOZE on the top once to stop the alarm temporarily, the “Bell” and “Zz” icon
keep flashing. The alarm will beep again in 5 minutes.
2) To stop the alarm, press ALM SET / ON-OFF once, the alarm beep will stop and the
icon become static, alarm will beep again same time next day.
Alarm Duration : 2 minutes
AUTOMATIC LIGHT SENSOR
Your clock is equipped with an op right next to the snooze / automatic light sensor on t
light button. The brightness of lower level when your room backlight will be adjusted to
environment is dim.
Please keep your clock at least 1-foot distance away from any objects on top.
TO DISPLAY TEMPERATURE IN °C OR °F
Simply press – (°C/°F) to display temperature in °C or °F.
TROUBLE SHOOTING
In case your clock shows irrelevant information or digits, it maybe affected by
electrostatic discharge or interferences from other devices. Press the RESET button on
the top of your clock. Your clock will be reset to default setting of time and calendar and it
will start to receive radio controlled time signal again.
Produktspezifikationen
| Marke: | Techno Line |
| Kategorie: | Alarmton |
| Modell: | WT 498 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Techno Line WT 498 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Alarmton Techno Line
6 Februar 2024
9 Januar 2024
28 August 2023
28 August 2023
28 August 2023
28 August 2023
28 August 2023
28 August 2023
28 August 2023
28 August 2023
Bedienungsanleitung Alarmton
- Alarmton Hama
- Alarmton SilverCrest
- Alarmton Maginon
- Alarmton Auriol
- Alarmton Cresta
- Alarmton Irox
- Alarmton König
- Alarmton Renkforce
- Alarmton Sempre
- Alarmton TFA
- Alarmton Blaupunkt
- Alarmton Finlux
- Alarmton Geemarc
- Alarmton Abus
- Alarmton Olympia
- Alarmton Smartwares
- Alarmton Sencor
- Alarmton Honeywell
- Alarmton Amplicomms
- Alarmton Monacor
- Alarmton Grothe
- Alarmton Delta Dore
- Alarmton La Crosse Technology
- Alarmton Oregon Scientific
- Alarmton Homematic IP
- Alarmton Electia
- Alarmton Digi-tech
- Alarmton Pentatech
- Alarmton Gewiss
Neueste Bedienungsanleitung fĂĽr -Kategorien-
11 Juni 2024
11 Juni 2024
27 Mai 2024
7 Mai 2024
5 Mai 2024
26 April 2024
15 April 2024
5 April 2024
5 April 2024
1 April 2024