Techno Line WM-5102 Bedienungsanleitung

Techno Line WM-5102

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Techno Line WM-5102 (5 Seiten) in der Kategorie . Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
WEATHER FORECAST CENTER
Instruction manual
INTRODUCTION
The Meteotronic Weather Forecast Center provides a professional weather forecast for the current and
the next three days. The weather forecasts are made by professional meteorologists and are sent out with
the radio-time signal generator DCF77 in Germany and HBG in Switzerland and can be received in almost
all of Europe. The reception area for the radio-time signal generator is divided into a total of 90
meteorological regions (60 regions with 4 day forecast, 30 regions with 2 day forecast). The desired region
for the local or holiday location is simply selected and the respectively current weather forecast is shown
on the display. This gives you a quick overview of the weather situation for the following days at any time.
Updating the weather data is done every day.
Please read the operating instructions carefully and completely before using for the first time, to
prevent function errors and incorrect operation. Keep the instructions handy for consulting.
WEATHER FORECAST CENTER
6
DISPLAY
Calendar
Alarm time
Reception indicator
for weather data
Alarm ON icon
Time
Indoor
temperature
Time reception signal
Weather forecast
icon (day)
MIN/MAX
temperature
Weather forecast
icon (night)
Probability
of rain
Wind direction
Wind strength Today Tomorrow
(Day 1) Day 2 Day 3
Reception indicator for weather data
Symbol on Æ Weather data completely received
Reception indicator for radio-time signal generator
Symbol flashing Æ Initial reception of date and time
Symbol on Æ Time and date are current
Symbol off Æ Time and date have not be updated
Alarm symbol
Symbol on Æ Alarm function switched on
Symbol off Æ Alarm function switched off
Symbol flashing Æ Alarm active or temporarily switched off (Snooze)
CHOOSING THE INSTALLATION LOCATION
Similar to a mobile telephone network or radio/TV reception, the reception of the radio-time receiver may not be
perfect in all locations. Just a couple of notes to make sure that your device works with no problems.
The location of the weather station is very important. This is the reason for the new test function that allows the
quality of reception to be checked in the surrounding area and to position the device in a location that has the best
possible conditions.
7
Switch on all potential sources of interference (e.g. television) in the area that you want to install the station
during the test!
Position the device in the location, oriented as you prefer, but at least one meter from the possible source of
interference.
Activate test mode as described.
Monitor the reception display on the weather station. If you have found a location that has good reception,
you can leave the device there and it will retrieve data automatically from the transmitter.
Note!
The time and date appear within a few minutes.
The transfer of larger quantities of data for the forecast take much longer: In order to receive all data, the
station requires 24 hours after start-up.
POSSIBLE SOURCES OF INTERFERENCE
Interferences as with a radio transmitter can occur and could be caused by the following influences:
In buildings with a lot of concrete, metal parts and electrical systems, reception problems can occur (e.g.
Mall).
Electrical devices such as television, computer, house-hold devices, etc. or transformers, land lines, radio
transmitters and railways are possible direct sources of interference.
Atmospheric influences and geographical features (mountains, etc.) can affect the propagation of the radio
waves.
The distance from the transmitter does also influence the reception. Areas such as Southern Italy or
Northern Scandinavia are also critical areas because of the great distances from the transmitter.
In all regions, so-called “dead spots” can occur making reception impossible.
Weak batteries in the device decrease the quality of reception.
COMMISSIONING AND CONFIGURATION
Inserting batteries/Changing batteries
Open the battery compartment at the rear of the weather station and insert the three batteries (LR6/ Mignon/
AA), ensuring proper polarity, into the battery compartment.
When disposing of dead batteries, see note on the disposal information.
Note!
All internal data is deleted when you change the batteries. The configuration parameters (weather region,
time zone and contrast) must be entered again (see the following chapter). Receiving all weather data
requires a period of at least 24 hours.
Calling up/exiting the configuration menu
Calling up the configuration menu
Press the <SET> button for at least three seconds. The first point in the configuration menu (weather region)
is called up.
8


Produktspezifikationen

Marke: Techno Line
Kategorie:
Modell: WM-5102

Brauchst du Hilfe?

Wenn Sie Hilfe mit Techno Line WM-5102 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Techno Line

Bedienungsanleitung

Neueste Bedienungsanleitung für -Kategorien-