TechniSat Satman Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für TechniSat Satman (8 Seiten) in der Kategorie Satelllitenempfänger. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
DigiDish 33
DigiDish 45
Satman
Satman 45
Multytenne 45
For wall mounting
Installation instructions
1
Dear customer,
thank you for purchasing one of the quality products produced by TechniSat. In order to ensure that the
quality of the product remains constant over many years, both the dish and the mounting bracket are
made of aluminium.
Please read the installation instructions carefully befor4e proceeding with the installation, to ensure that
you can enjoy optimum reception performance after installation.
Before starting the installation, please check that you have received all parts and components of the
external unit.
Items supplied (see illustrations 1 and 2)
Item Article
1 AZ/EL bracket with LNB holding bracket and swivel profile
2 Dish antenna
3 Connector
4 Wall mount*: “short” or “medium” or “long”
5 LNB
6 LNB holding bracket with 2 screws M3x30, 2 nuts M3, 2 washers**
A Screws M6x15, 4 nuts M6, 4 washers
D Screws for the adjustment of the elevation angle
* Contents vary with package selected
**only with DigiDish
Illustration 1 Illustration 2
2
1 Mounting the external unit
When you unpack the external unit, you will find that it has already been partly pre-
assembled, so all you need to do is to mount the dish (item 2) and the connector piece
(item 3).
First, use the screws (A) to attach the dish to the AZ/EL bracket (item 1). Then loosen
the screw (B) on the swivel profile in order to mount the connector piece. Then mount
the LNB (item 5) on the LNB holder, using the LNB holding bracket (item 6) as shown in
illustration 1.
2 Installation
Selecting a location
a) First ensure there is an uninterrupted line of sight from the intended mounting
position in a southerly direction in order to receive signals from the satellite position
ASTRA 19,2° East. With the aid of the illustration below you can see whether you
have left enough space with regard to any neighbouring obstruction, in order to avoid
the signal being weakened by such an obstruction. When mounting the dish below a
terrace, please ensure that it is not in the shadow of a projecting roof.
b) Now attach the wall mount (item 4) horizontally at the location selected. In order to
ensure an optimum hold fort he external unit, you should select appropriate fastening
materials (dowels, screws, etc.). Because of the huge variety of wall conditions found
in practice, no fastening materials for mounting he wall mount is supplied with the
package.
c) Loosen the screw (C) on the wall mount, and attach the external unit using the
connector piece.
Angle A
(elevation)
Gradient
B
(cm per
m)
22° 40,40
24° 44,52
26° 48,77
28° 53,17
29° 55,40
30° 57,74
31° 60,00
32° 62,49
33° 64,90
34° 67,45
35° 70,02
36° 72,65
37° 75,36
38° 78,13
3


Produktspezifikationen

Marke: TechniSat
Kategorie: Satelllitenempfänger
Modell: Satman

Brauchst du Hilfe?

Wenn Sie Hilfe mit TechniSat Satman benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Satelllitenempfänger TechniSat

Bedienungsanleitung Satelllitenempfänger

Neueste Bedienungsanleitung für -Kategorien-