TC Electronic SCF Gold Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für TC Electronic SCF Gold (9 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/9
SCF GOLD
Reissue SCF Stereo Chorus Flanger Pedal with
3 Modulation Modes, Analog BBD Circuit and Preamp
Quick Start Guide
V 1.0
2SCF GOLD
3 types of stereo eects
The 3 kinds of eects are all stereo, but can be used in mono as well. The eects are suitable
for all electric or electried instruments and will in no way compromise the tonal quality
of the instrument.
Chorus
A chorus is basically a pitch generator which mixes multiple delay signals. When the
multiple delay signals are mixed with the original signal, a soft and wide sounding
modulation eect is created.
Flanger
A anger is based on the same principle as a chorus, although here the signal can be
regenerated (like adding feedback on a delay) creating a more distinctive sounding eect.
Pitch Modulation
A combination of chorus and pitch vibrato which creates a “light” chorus sound.
Real Stereo
When using stereo, the eect signals and the clean signal appear simultaneously in both sides.
The eect signals are alternating phase reversed in left and right sides, creating a unique
spatial dimension.
Introduction SCF GOLD Controls
4SCF GOLD
(1) SPEED – Controls the rate of sweep
in a range from 1 sweep every
10 seconds to 10 sweeps each second
(0.1 – 10 Hz). Slower Speed settings
usually work well with higher
Width settings, and faster speeds
should use lower Width settings.
(2) INTENSITY – The Intensity knob has 3
functions, one for each mode:
In the Chorus mode, it blends
between chorus and clean signal.
In Flanger mode, it controls
the strength of the comb lter
phasing of the signal (like
feedback on a delay).
In Pitch Modulation mode,
it blends chorus with vibrato.
(3) MODE – Switches between the
3 modes of operation: Chorus, Pitch
Modulation (P.M.), and Flanger.
(4) WIDTH – Determines how wide of
a modulation (sweep) is produced.
Ranges are from 0 (no modulation) to
6 (max) on a relative scale.
(5) INPUT GAIN – Controls the gain of
the built-in preamplier. Set fully
counterclockwise for most situations.
(6) OVERLOAD – Indicates when the SCF
is close to being overloaded. Adjust for
occasional peak indication.
(7) INPUT – High impedance input.
Connect your instrument here.
(8) OUTPUT (MONO) – Outputs a
monophonic eect signal, or if both
outputs are used, the left channel of
the stereo signal.
(9) OUTPUT (STEREO) – Outputs the right
channel of the stereo signal.
(10) BYPASS Press to engage or bypass
the pedal.
(11) POWER – Connect a standard
9 V / >150 mA power supply.
(12) LED INDICATORIndicates the sweep
rate (as set by Speed knob) with the
eect on.
SCF GOLD Controls
(EN) Controls


Produktspezifikationen

Marke: TC Electronic
Kategorie: Nicht kategorisiert
Modell: SCF Gold

Brauchst du Hilfe?

Wenn Sie Hilfe mit TC Electronic SCF Gold benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert TC Electronic

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-