Tascam HS-8 Bedienungsanleitung

Tascam Hi-Fi-Anlage HS-8

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tascam HS-8 (8 Seiten) in der Kategorie Hi-Fi-Anlage. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

TASCAM HS-8 1

HS-8

D01162820C

New functions in firmware V1.40

The following functions have been added in firmware V1.40

0Support for loading files that have been recorded by other devices

0T/C Frame Sync REC function added

0REC STOP Position function added

0Added display of take end timecode on take list sccreen

0Sound Report file output function added

0ONLINE fader setting value display added

0Metering Point switching function added

0Warnings added when working with files/folders using an FTP client

application

0Pressing the Esc key on a connected keyboard now has the same function

as using the EXIT/CANCEL [PEAK CLEAR] key on the front of the unit

0Connected keyboard shortcut key functions added

0New pop-up messages added

Support for loading files that have been recorded by

other devices

The unit can now handle files that were recorded by other devices when they

are loaded in the current folder without rebuilding the folder

T/C Frame Sync REC function added

A T/C Frame SYNC REC function has been added to the REC MODE page of

the REC SETUP screen. This function starts recording precisely at the next

timecode generator frame division.

T/C Frame Sync REC

OFF (default): Recording starts when the operation to start recording occurs

regardless of the timecode generator value.

ON: Recording starts precisely at the next timecode generator frame division.

02 03 04 05

Recording start operation

Timecode time

T/C Frame Sync Rec：OFF

T/C Frame Sync Rec：ON

Frame

division

Example

NOTE

This unit notes recording start timestamps with sample precision. For this

reason, in editing environments that round audio file positions to frame preci-

sion (e.g. AVID Media Composer, OMF files, etc.), the positions of files recorded

by this unit will be off when synchronized with video. By turning this function

on, recording will be started precisely at the next timecode generator frame

division, so the original positions of files recorded by this unit can be preserved

when synchronized with video in such editing environments.

REC STOP Position function added

A REC STOP Position function has been added to the REC MODE page of the

REC SETUP screen. This function allows you to set the position after recording

stops to either the start or the end of the take.

REC STOP POSITION

Take Start (default): After recording, the unit stops at the start of the take that

was recorded. Use this setting when you want to play a take immediately

after recording, for example.

Take End: After recording, the unit stops at the end of the take that was

recorded. Use this setting when you want to check the take length or take

end timecode using the time counter, for example.

Added display of take end timecode on take selection

screen

An “END T/C” time display column, which shows the timecode of the take end,

has been added to the take list screen.

Sound Report file output function added

A Sound Report function has been added that exports current take list infor-

mation as a CSV file.

1. Open the current take list.

2. Press the MENU button to open the pull-up menu, and touch the CREATE

Report button.

NOTE

The CREATE Report button will only appear for the current take list.

2 TASCAM HS-8

HS-8

3. When the confirmation message appears, touch the OK button.

Current take list information is output to a file in the current folder of

the current project. The file is named with this format: “<current project

name>_<current folder name>_Report.csv”.

NOTE

If a file with the same name already exists, a message confirming that you

want to overwrite it will appear. Touch the OK button to overwrite that file.

ONLINE fader setting value display added

ONLINE fader setting value display has been added to the CHANNEL SETUP

screens.

CH1 SETUP screen

L/R SETUP screen

NOTE

iSince the system uses only one ONLINE fader setting, the same setting value is

linked on all channel pages and the L/R page.

iThe ONLINE fader can be operated when a TASCAM RC-HS20PD (sold sepa-

rately) is connected. It cannot be used with just the main unit. If no RC-HS20PD

is connected, the ONLINE fader setting value will be 0dB.

Metering Point switching function added

A function that allows you to set the meter display to before or after the

ONLINE fader has been added to the METER SETUP and CHANNEL SETUP

screens.

pMETER SETUP screen

Metering Point

Pre Fader (default): The meters show the levels before the ONLINE fader.

Post Fader: The meters show the levels after the ONLINE fader.

pCHANNEL SETUP screens

CH1 SETUP screen

L/R SETUP screen

METER button

You can switch whether the meters show the levels before or after the

ONLINE fader. Touch the left button to have the meters show the levels

before the ONLINE fader. Touch the right button to have the meters show the

levels after the ONLINE fader.

NOTE

iBefore this function was added, the Metering Point was fixed to the Post Fader

setting. Be aware that with the addition of this function, the default Metering

Point setting is now Pre Fader.

iSince the system uses only one Metering Point setting, the same setting value is

linked on all channel pages and the L/R page.

iThe ONLINE fader can be operated when a TASCAM RC-HS20PD (sold sepa-

rately) is connected. It cannot be used with just the main unit.

TASCAM HS-8 3

HS-8

Warnings added when working with files/folders using an

FTP client application

When an FTP client application is used to conduct one of the following opera-

tions, a message recommending that the folder be rebuilt now appears and a

X icon appears above the relevant button.

0A file present in the take list is deleted from the current folder

0A folder is deleted

NOTE

Always rebuild if a message recommending that the folder be rebuilt and the

X icon appears. If you do not rebuild, discrepancies between the management

and audio files will occur, resulting in the following symptoms.

iDeleted folders and files will be shown

Connected keyboard shortcut key functions added

The following shortcut key functions for connected keyboards have been

added.

Home key: Open Home Screen

End key: Open MENU screen

Page Down key: Open PROJECT screen

Ctrl+T key: Open PROJECT take selection screen

Ctrl+R key: Open current take name editing screen

Ctrl+N key: Open NEXT TAKE NAME screen

Tab key: Set a mark point

New pop-up messages added

Message Details and responses Remarks

Directory contents changed via FTP.

REBUILD required.

REBUILD Now?

The directory contents were changed by FTP, so rebuilding

is required.

Rebuild changed Directory? The changed directory will be rebuilt. After using a file on this unit by FTP, this message will appear