Tascam CD-A500 Bedienungsanleitung

Tascam CD-Spieler CD-A500

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tascam CD-A500 (17 Seiten) in der Kategorie CD-Spieler. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/17

CD-A500

Compact Disc Player/Reverse Cassette Deck

3D0017100A

NEDERLANDS ESPAÑOL ITALIANO DEUTSCH FRANÇAIS ENGLISH

This appliance has a serial number located

on the rear panel. Please record the model

number and serial number and retain them

for your records.

Model number

Serial number

WARNING: TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

The exclamation point within an equilateral triangle is intended to alert the user to the pres-

ence of important operating and maintenance (servicing) instructions in the literature

accompanying the appliance.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert

the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure

that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

OWNER'S MANUAL / MANUEL DU PROPRIETAIRE

BEDIENUNGSANLEITUNG / MANUALE DI ISTRUZIONI

MANUAL DEL USUARIO / GEBRUIKSAANWIJZING

_ 2_

IMPORTANT SAFETY INSTRUCTIONS

CAUTION:

ORead all of these Instructions.

OSave these Instructions for later use.

OFollow all Warnings and Instructions marked on the audio

equipment.

1) Read Instructions — All the safety and operating instructions should

be read before the product is operated.

2) Retain Instructions — The safety and operating instructions should

be retained for future reference.

3) Heed Warnings — All warnings on the product and in the operating

instructions should be adhered to.

4) Follow Instructions — All operating and use instructions should be

followed.

5) Cleaning — Unplug this product from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

6) Attachments — Do not use attachments not recommended by the

product manufacturer as they may cause hazards.

7) Water and Moisture — Do not use this product near water _for

example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a

wet basement; or near a swimming pool; and the like.

8) Accessories — Do not place this product on an unstable cart, stand,

tripod, bracket, or table. The product may fall, causing serious injury to a

child or adult, and serious damage to the product. Use only with a cart,

stand, tripod, bracket, or table recommended by the manufacturer, or

sold with the product. Any mounting of the product should follow the man-

ufacturer’s instructions, and should use a mounting accessory recom-

mended by the manufacturer.

9) A product and cart combination should be moved with care. Quick

stops, excessive force, and uneven surfaces may cause the product and

cart combination to overturn.

10) Ventilation — Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the product and to protect

it from overheating, and these openings must not be blocked or covered.

The openings should never be blocked by placing the product on a bed,

sofa, rug, or other similar surface. This product should not be placed in a

built-in installation such as a bookcase or rack unless proper ventilation

is provided or the manufacturer’s instructions have been adhered to.

11) Power Sources — This product should be operated only from the

type of power source indicated on the marking label. If you are not sure

of the type of power supply to your home, consult your product dealer or

local power company. For products intended to operate from battery

power, or other sources, refer to the operating instructions.

12) Grounding or Polarization — This product may be equipped with a

polarized alternating-current line plug (a plug having one blade wider

than the other). This plug will fit into the power outlet only one way. This

is a safety feature. If you are unable to insert the plug fully into the outlet,

try reversing the plug. If the plug should still fail to fit, contact your elec-

trician to replace your obsolete outlet. Do not defeat the safety purpose

of the polarized plug.

13) Power-Cord Protection — Power-supply cords should be routed so

that they are not likely to be walked on or pinched by items placed upon

or against them, paying particular attention to cords at plugs, conve-

nience receptacles, and the point where they exit from the product.

14) Outdoor Antenna Grounding — If an outside antenna or cable sys-

tem is connected to the product, be sure the antenna or cable system is

grounded so as to provide some protection against voltage surges and

built-up static charges. Article 810 of the National Electrical Code,

ANSI/NFPA 70, provides information with regard to proper grounding of

the mast and supporting structure, grounding of the lead-in wire to an

antenna discharge unit, size of grounding conductors, location of anten-

na-discharge unit, connection to grounding electrodes, and requirements

for the grounding electrode.

"Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to

Section 820-40 of the NEC which provides guidelines for proper ground-

ing and, in particular, specifies that the cable ground shall be connected

to the grounding system of the building, as close to the point of cable

entry as practical.

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250. PART H)

NEC - NATIONAL ELECTRICAL CODE

ELECTRIC

SERVICE

EQUIPMENT

Example of Antenna Grounding as per

National Electrical Code, ANSI/NFPA 70

GROUND

CLAMP

15) Lightning — For added protection for this product during a lightning

storm, or when it is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna or cable sys-

tem. This will prevent damage to the product due to lightning and power-

line surges.

16) Power Lines — An outside antenna system should not be located in

the vicinity of overhead power lines or other electric light or power cir-

cuits, or where it can fall into such power lines or circuits. When installing

an outside antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them might be fatal.

17) Overloading — Do not overload wall outlets, extension cords, or

integral convenience receptacles as this can result in risk of fire or elec-

tric shock.

18) Object and Liquid Entry — Never push objects of any kind into this

product through openings as they may touch dangerous voltage points

or short-out parts that could result in a fire or electric shock. Never spill

liquid of any kind on the product.

19) Servicing — Do not attempt to service this product yourself as

opening or removing covers may expose you to dangerous voltage or

other hazards. Refer all servicing to qualified service personnel.

20) Damage Requiring Service — Unplug this product from the wall

outlet and refer servicing to qualified service personnel under the follow-

ing conditions:

a) when the power-supply cord or plug is damaged.

b) if liquid has been spilled, or objects have fallen into the product.

c) if the product has been exposed to rain or water.

d) if the product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the operating

instructions as an improper adjustment of other controls may result in

damage and will often require extensive work by a qualified technician to

restore the product to its normal operation.

e) if the product has been dropped or damaged in any way.

f ) when the product exhibits a distinct change in performance _ this indi-

cates a need for service.

21) Replacement Parts — When replacement parts are required, be

sure the service technician has used replacement parts specified by the

manufacturer or have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock, or other haz-

ards.

22) Safety Check — Upon completion of any service or repairs to this

product, ask the service technician to perform safety checks to deter-

mine that the product is in proper operating condition.

23) Wall or Ceiling Mounting — The product should be mounted to a

wall or ceiling only as recommended by the manufacturer.

24) Heat — The product should be situated away from heat sources

such as radiators, heat registers, stoves, or other products (including

amplifiers) that produce heat.

_ 3_

SAFETY INFORMATION

O O O OCAUTION ACHTUNG OBSERVERA ADVARSEL

This product has been designed and manufactured according to FDA regulations "title 21, CFR, chapter 1, subchapter J, based on the Radiation

Control for Health and Safety Act of 1968", and is classified as a class 1 laser product. There is no hazardous invisible laser radiation during opera-

tion because invisible laser radiation emitted inside of this product is completely confined in the protective housings.

The label required in this regulation is shown 1.

OCAUTION

- DO NOT REMOVE THE PROTECTIVE HOUSING USING A SCREWDRIVER.

- USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZ-

ARDOUS RADIATION EXPOSURE.

- IF THIS PRODUCT DEVELOPS TROUBLE, CONTACT YOUR NEAREST QUALIFIED SERVICE PERSONNEL, AND DO NOT USE THE PRODUCT IN ITS

DAMAGED STATE.

Optical pickup: Type : KSS-212B

Manufacturer : SONY Corporation

Laser output : Less than 0.4 mW on the objective lens

Wavelength : 760_800nm

1THIS LABEL IS ATTACHED TO THE PLACE AS ILLUSTRATED TO

INFORM THAT THE APPARATUS CONTAINS A LASER COMPONENT.

1DIESE AUFKLEBEMARKE IST AN DEM IN DER ABBILDUNG

GEZEIGTEN ORT ANGEBRACHT UM DARAUF HINZUWEISEN, DASS

IM INNERN DES GER TS EINE LASER-KOMPONENTE BEFINDET.Ä

1PÅSKRIFTEN SITTER PÅ APPARATEN SOM VISAS SOM UPPMAN-

ING OM ATT APPARATEN OMFATTAR EN INBYGGD LASERKOMPO-

NENT.

1DETTE MÆRKAT ER ANBRAGT SOM VIST I ILLUSTRATIONEN FOR

AT ADVARE BRUGEREN OM AT APPARATET INDEHOLDER EN

LASERKOMPONENT.

2DETTE MÆRKAT ER SOM VIST PÅ ILLUSTRATIONEN ANBRAGT PÅ

INDERSIDEN AF TOPD KSLET FOR AT ADVARE BRUGEREN OM ATÆ

YDERLIGERE FREMTRÆNGEN VIL VÆRE FORBUNDET MED FARE

FOR AT UDS TTE SIG FOR LASERSTRÆ ÅLING.

ADVARSEL — BETJENING AF ANDRE KONTROLLER OG REGULA-

TORER ELLER BENYTTELES AF ANDRE FREMGANGSM DER ENDÅ

BESKREVET HERI ER FORBUNDET MED FARE FOR UDSÆTTELSE

FOR LASERSTRÅLING.

VARING: APPARATEN INNEH LLER LASER LOMPONENT MEDÅ

STR LNING Å ÖVERSTIGANDE KLASS 1.

"ADVARSEL: USYNLIG LASERSTRÅLING VED ÅBNING NAR

SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION. UNDGÅ

UDSAETTELSE FOR STRÅLING"

"VAROITUS! SUOJAKOTELOA EI SAA AVATA. LAITE SISÄLTÄÄ

LASERDIODIN. JOKA L (N ) SILMILLEÄHETTÄ ÄKYM NTÄ ÖTÄ

VAARALLISTA LASERSÄTEILYÄ".

ADVARSEL: USYNLIG LASERBESTR LING N R DENNEÅ Å

DELEN ER PEN OG SIKKERHETSSPERREN ER UTKOBLETÅ

UNNG LING.Å UTSETTELSE FOR STRÅ

CLASS 1 LASER PRODUCT

LUOKAN 1 LASERLAITE

KLASS 1 LASERAPPARAT

CERTIFICATION

THIS PRODUCT COMPLIES WITH DHHS

RULES 21 CFR SUBCHAPTER J APPLI-

CABLE AT DATE OF MANUFACTURE

TEAC CORPORATION

3-7-3 NAKA-CHO, MUSASHINO-SHI, TOKYO, JAPAN

MANUFACTURED TIF

For U.S.A.

CAUTION - INVISIBLE LASER RADIATION WHEN OPEN AND

INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM.

VORSICHT! UNSICHT BARE LASERST RAHLUNGTRITT AUS.

WENN DECKEL GEÖFFNET UND WENN

SICHERHEITSVERRIEGELUNG BERBRÜ ÜCKT IST.

NICHT DEM STRAHL AUSSET ZEN !

VARNING - OSYNLIG LASERSTRÅLNING N R DENNA DELÄ

Ä Ö Ä ÄR PPNAD OCH SP RR R URKOPPLAD.

STR LEN Ä ÄR FARLIG.

ADVARSEL -USYNLIG LASERST R BNING, NÅ ÅLING VED ÅR

SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION.

UNDG LING.Å UDSÆTTELSE FOR STRÅ

VAROITUS! SUOJAKOTELOA EI SAA AVAT A. LAITE SISÄLT ÄÄ

LASERDIODIN, JOKA L (NÄHETTÄÄ ÄKYM NTÄ ÖTÄ)

SILMILLE VAARALLISTA LASERSÄ ÄTEILY .

ADVARSEL -USYNLIG LASERBESTRÅLING N R DENNE DELEN ERÅ

ÅPEN OG SIKKERHETSSPERREN ER UTKOBLET.

UNNG LING.Å UTSETTELSE FOR STRÅ

Produktspezifikationen

Marke:	Tascam
Kategorie:	CD-Spieler
Modell:	CD-A500
Gewicht:	6400 g
Radio Data System (RDS):	Nein
Fernbedienung enthalten:	Ja
Gerätetyp:	HiFi-CD-Player
Abmessungen (BxTxH):	483 x 133 x 270 mm
Unterstützte Medientypen:	CD
Kassettendeck:	Ja
Digitaltuner:	Nein