Tannoy VXP 12Q Bedienungsanleitung

Tannoy Speaker VXP 12Q

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tannoy VXP 12Q (29 Seiten) in der Kategorie Speaker. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/29
VXP Series
Professional Loudspeake
Operation Manual
2
VXP Series Operation Ma
Important Saf
SAFETY WARNING
Permanent disconnection from the mains supply is achieved by removing the power cord from the mains supply outlet.UNDER NO CIRCUMSTANCES SHOULD YOU BREAK THE POWER USING THE powerCON CONNECTOR.
SAFETY WARNING
Do not remove any covers, loosen any ฀xings or allow items to enter any aperture
SAFETY WARNING
Objects ฀lled with liquids should not be placed on this apparatus.
SAFETY WARNING
The rear heatsink on this product gets hot. Avoid direct skin contact during operation and for at least 5 minutes after power has been isolated.
AVERTISSEMENT DE SECURITE
Pour déconnecter l’appareil de l’alimentation principale de façon permanente, débranchez le connecteur du câble fourni à l’arrière de l’appareil.
AVERTISSEMENT DE SECURITE
Ne retirez pas les couvercles, ne desserrez pas les ฀xations et ne laissez aucune pièce s’introduire dans les ouvertures.
AVERTISSEMENT DE SECURITE
Ne placez pas d’objets contenant du liquide à proximité de l’appareil.
AVERTISSEMENT DE SECURITE
Le radiateur arrière de cet appareil devient chaud. Evitez tout contact direct avec la peau pendant le fonctionnement et au moins 5 minutes après la mise hors tension de l’appareil.
Important Safet y Instructions
1. Read these instru2. Keep these instruc3. Heed all warning4. Follow all instruc5. Do not use this ap6. Clean only with a7. Do not block any with the manufactur8. Do not install nea registers, stoves, or produce heat.9. Do not defeat the plug. A polarized pl other. A grounding prong. The wide bla safety. If the provid electrician for repla10. Protect the power particularly at plugs where they exit from11. Only use attachm manufacturer. 12. Use only with the speci฀ed by the man When a cart is used apparatus combinat13. Unplug this appa for long periods of t14. Refer all servicin required when the a such as power-supp spilled or objects ha has been exposed to normally, or has bee
Tepresence of uninsulated "dangerous voltage " within theproduct's enclosure that may be of su฀cient magnitudetTioperating and maintenance (servicing) instructions in thel
VXP Series Operation Manual rev 3.0.0
3
Installation Instructions
1. THIS PRODUCT MUST BE EARTHED. Use only a ฀exible
cable or cord provided with a green or green and yellow core
which must be connected to the protective earthing terminal
of the detachable Neutrik ‘powerCON’ type NEC3FCA
connector (Tannoy part number 3461 0919) as supplied with
the equipment. The other end of the green or green and yellow
conductor must be connected to the earthing pin of a suitable
mains plug or the earthing terminal of the installation. The cord
must be of maximum length 7.5 meters, rated SJ, SJT, or SJE,
10A minimum and be marked VW-1.
2. The electrical power connection to this product is only to
be made via a detachable Neutrik ‘powerCON’ type NEC3FCA
connector (Tannoy part number 3461 0919) as supplied with
the equipment. Wiring to this connector must be made
by suitably quali฀ed personnel and must comply with all local
requirements.
3. Do not install this equipment in an enclosed space. Do not limit
free ventilation and movement of air around the back panel.
Ensure that there is at least 100 mm (4”) of space around all
sides of the product for ventilation. Only use attachments and
accessories approved or speci฀ed by Tannoy.
FOR CUSTOMERS IN EUROPE
This product complies with both the LVD (electrical safety)
73/23/EEC and EMC (electromagnetic compatibility) 89/336/
EEC directives issues by the commission of the European
community. Compliance with these directives implies conformity
with the following European standards:
EN60065 Product safety
EN55103-1 EMC emissions
EN55103-2 EMC immunity
This product is intended for the following electromagnetic
environments: E2; E3 & E4. Environment E1 (domestic) is
speci฀cally excluded.
FOR CUSTOMERS IN THE USA & CANADA
This product has been tested for electrical safety and
complies with:
UL60065 7th edition
CA/CSA C22.2 No.60065-03 EMC
This equipment has been designed to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment.
Industry Canada Class A emission compliance statement:
This Class B digital apparatus complies with Canadian ICES-003.
Avis de conformite’ a’ la re’glementation d’Industrie Canada, cet
appareil nume’rique de classe A est conforme a’ la norme ICES-
003.

Produktspezifikationen

Marke: Tannoy
Kategorie: Speaker
Modell: VXP 12Q

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tannoy VXP 12Q benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Speaker Tannoy

Bedienungsanleitung Speaker

Neueste Bedienungsanleitung fĂźr -Kategorien-