Tannoy OCV 8 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Tannoy OCV 8 (12 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war fĂŒr 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
OCV OWNER MANUAL_01
Series
O W N E R ’ S M A N U A L
Series
02_ OCV OWNER MANUAL
CONTENTS
INTRODUCTION 02 WIRING & SETTING UP 06
UNPACKING 02 DIMENSIONS 07
SAFETY NOTICES 02 TECHNICAL SPECIFICATIONS 08
PRODUCT FEATURE IDENTIFICATION 03 WARRANTY 09
ACCESSORIES 04 DECLARATION OF CONFORMITY 10
INSTALLATION GUIDE 05
INTRODUCTION
Thank you for purchasing this Tannoy Product loudspeaker.This product range is suited for high-level music and
speech reinforcement applications requiring exceptional sonic quality with uncompromised reliability.
UNPACKING
Every Tannoy product and accessory is carefully inspected before packing. After unpacking, please inspect your
product to make sure no damage has occurred in transit. In the unlikely event of any damage, would you please
notify your dealer immediately and retain your shipping carton, as your dealer may ask you to return the faulty unit to
them for inspection.
Each OCV loudspeaker is provided with the following accessories as standard; Gripple speed clamps, release key,
1 x hanging cable, 1 x safety cable, 1 x terminal weather boot, 1 x euroblock connector, 3/8” screwed rod adaptor,
cable ties.
SAFETY NOTICES
Some regional construction codes require the use of a secondary method of securing loudspeakers in ceiling to
provide security of a backup support. A secondary support line should be attached from the safety loop on the rear of
the product to a source point on the ceiling. Please consult the relevant construction codes in your region.
Tannoy will not be held responsible for any damages caused by the improper installation of these loudspeakers.
SAFETY NOTE:
In order to comply with the relevant re safety regulations (ie. BS 5839:1998), it is required that in the event of re,
that failure of the circuit to which the loudspeaker is connected does not occur before evacuation of the building is
complete. Suitable measures include: -
a) use of terminal blocks (for connection to primary) with a melting point of not less than 650°C, for example
constructed from ceramic materials;
b) use of terminal blocks of a lower melting point but protected with thermal insulation;
c) use of terminal blocks such that, on melting, an open-circuit or a short-circuit does not occur.
Series
OCV OWNER MANUAL_03
Series
PRODUCT FEATURE IDENTIFICATION
OCV 6 / OCV 8
HANGING / SAFETY POINT
TAP SELECTOR
EUROBLOCK


Produktspezifikationen

Marke: Tannoy
Kategorie: Lautsprecher
Modell: OCV 8

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tannoy OCV 8 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Tannoy

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung fĂŒr -Kategorien-