Tanita InnerScan BC-590BT Bedienungsanleitung

Tanita Waage InnerScan BC-590BT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tanita InnerScan BC-590BT (27 Seiten) in der Kategorie Waage. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/27

Instruction Manual

Read this Instruction Manual carefully and keep it for future reference.

Mode d´emploi

A lire attentivement et à garder en cas de besoin.

Manual de instrucciones

Lea detenidamente este manual de instrucciones y guárdelo para futura referencia.

Manual de instruções

Leia cuidadosamente este manual e guarde-o para futura referência.

Model : BC-590BT

with

MANUAL

Table of Contents

Introduction • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Features and Functions ••••••••••••••••••••2

Preparations Before Use •••••••••••••••••••2

Getting Accurate Readings ••••••••••••••••3

Automatic shut-down function ••••••••••••3

Switching the weight mode •••••••••••••••3

Setting and storing personal data in memory

•••4

Operation with Bluetooth ••••••••••••••••••5

(Using Personal key)

Operation with Bluetooth ••••••••••••••••••7

(Using Guest Mode)

Error Process •••••••••••••••••••••••••••••••

Taking Weight Measurement Only • • • • • • • 10

Troubleshooting•••••••••••••••••••••••••••

Output Data Format ••••••••••••••••••••••11

Specifications •••••••••••••••••••••••••••••

Bluetooth Specifications • • • • • • • • • • • • • • • • •12

Table des matières

Introduction •••••••••••••••••••••••••••••••

Caracyèristiquesn •••••••••••••••••••••••••

Avant utilisation •••••••••••••••••••••••••••

Comment obtenir des résultats exacts • • 15

Fonction d’qrrét automatique ••••••••••15

Commutation do mode poids ••••••••••••15

Reglage et enregistrement des données personnelles en mémoire

• • 16

Utilisation avec Bluetooth ••••••••••••••••17

(Utilisation de la touche Personnelle)

Utilisation avec Bluetooth ••••••••••••••••19

(Utilisation du mode Invité)

Traitement d’ferreur • • • • • • • • • • • • • • • • • • • • •

Lecture du poids uniquement ••••••••••••22

Dépannage ••••••••••••••••••••••••••••••••

Format de sortie des données •••••••••••23

Caractéristiques • • • • • • • • • • • • • • • • • • • • • • • • • •

Spécifications techniques Bluetooth • • • •24

Índice de materias

Introducción ••••••••••••••••••••••••••••••

Prestaciones y funciones•••••••••••••••••26

Preparaciones antes del uso •••••••••••••26

Cómo obtener lecturas exactas ••••••••••27

Fanción de apagado automatico •••••••••27

Cambiando el modo del peso ••••••••••••27

Introducción y almacenamiento de datos personales en la memoria

• • 28

Operación con Bluetooth •••••••••••••••••29

(Uso de la tecla Personal)

Operación con Bluetooth •••••••••••••••••31

(Uso del modo Invitado)

Proceso de error ••••••••••••••••••••••••••

Cómo obtener lecturas de peso solamente

• • 34

Resolución de fallos•••••••••••••••••••••••

Formato de datos de salida ••••••••••••••35

Detalles Técnicos •••••••••••••••••••••••••

Especificaciones de Bluetooth •••••••••••36

Tabela de conteúdo

Introdução • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Características e funções ••••••••••••••••38

Preparativos antes do uso •••••••••••••••38

Obtendo leitura precisa •••••••••••••••••••39

Função desligamento automático • • • • • • •39

Alterando a unidade de medida do Peso • • 39

Programar e armazenar dados pessoais na memória

• • 40

Operação com Bluetooth •••••••••••••••••41

(Usando a tecla Pessoal)

Operação com Bluetooth •••••••••••••••••43

(Usando o Modo de Visitante)

Processo de erros ••••••••••••••••••••••••

Somente a leitura do peso •••••••••••••••46

Localizando defeitos ••••••••••••••••••••••

Formato dos dados de saída •••••••••••••47

Especificações ••••••••••••••••••••••••••••

Especificações do Bluetooth •••••••••••••48

Introduction

Thank you for selecting a Tanita Body Composition Monitor. This monitor is one in a wide range of

home healthcare products produced by Tanita.

This Instruction Manual will guide you through the setup procedures and outline the key features.

Please keep it handy for future reference. Additional information on healthy living can be found on

our website www.tanita.com.

Tanita products incorporate the latest clinical research and technological innovations.

All data is monitored by our Tanita Medical Advisory Board to ensure accuracy.

Note : Read this Instruction Manual carefully and keep it handy for future reference.

Safety Precautions

Note that people with an electronic medical implant, such as a pacemaker, should not use a Body Composition Monitor as it pass-

es a low-level electrical signal through the body, which may interfere with its operation.

Pregnant women should use the weight function only. All other functions are not intended for pregnant women.

Do not place this monitor on slippery surfaces such as a wet floor.

Recorded data may be lost if the monitor is used incorrectly or is exposed to electrical power surges. Tanita takes no responsibility

for any kind of loss caused by the loss of recorded data. Tanita takes no responsibility for any kind of damage or loss caused by

the monitor, or any kind of claim made by a third person.

Important Notes for Users

This Body fat monitor is intended for adults and children (ages 7-17) with inactive to moderately active lifestyles and adults with

athletic body types.

Tanita defines

“

athlete” as a person involved in intense physical activity of approximately 10 hours per week and

who has a resting heart rate of approximately 60 beats per minute or less. Tanita's athlete definition includes

“

lifetime of fitness” individuals who have been fit for years but currently exercise less than 10 hours per week.

The body fat monitor function is not intended for pregnant women, professional athletes or bodybuilders.

Recorded data may be lost if the unit is used incorrectly or is exposed to electrical power surges. Tanita takes no responsibility for

any kind of loss caused by the loss of recorded data.

Tanita takes no responsibility for any kind of damage or loss caused by these units, or any kind of claim made by a third person.

Note : Body fat percentage estimates will vary with the amount of water in the body, and can be affected by dehydration or over-

hydration due to such factors as alcohol consumption, menstruation, illness, intense exercise, etc.

Getting Accurate Readings

To ensure accuracy, readings should be taken without clothing and under consistent conditions of hydration. If you do not

undress, always remove your socks or stockings,and be sure the soles of your feet are clean before stepping on the measuring

platform.Be sure that your heels are correctly aligned with the electrodes on the measuring platform. Don't worry if your feet appear

too large for the unit -accurate readings can still be obtained if your toes overhang the platform.

It is best to take readings at the same time of day. Try to wait about three hours after rising, eating, or hard exercise before taking

measurements.

While readings taken under other conditions may not have the same absolute values, they are accurate for determining the per-

centage of change as long as the readings are taken in a consistent manner. To monitor progress, compare weight and body fat

percentage taken under the same conditions over a period of time.

Note : An accurate reading will not be possible if

the soles of your feet are not clean, or if

your knees are bent or you are in a sitting

position.

Heels centered on

electrodes

Toes may overhang

measuring platform

Automatic shut-down function

The automatic shut-down function shuts off the power automatically in the following cases:

•If you interrupt the measurement process, the power will shut down automatically within 10 to 20 seconds, depending upon the

type of operation.

•If an extreme weight is applied to the platform.

•During programming, if you do not touch any of the keys or buttons within 60 seconds.*

•After you have completed the measuring process.

Note : If the power shuts off automatically, repeat the steps from “Setting and Storing Personal Data in Memory” (p.4).

You can switch the unit indication by using the switch on the back of the scale as shown in the figure.

Note : If weight mode is set to pounds or stone-pounds, the height programming mode will be automatically set to feet and inches.

Similarly, if kilograms is selected, height will be automatically set to centimetres.

Switching the weight mode Note : For use only with models containing the weight mode switch

Positioning the Monitor

Place the measuring platform on a hard, flat surface where there is minimal vibration to ensure

safe and accurate measurement.

Note : To avoid possible injury, do not step on the edge of the platform.

Handling Tips

This monitor is a precision instrument utilizing state-of-the-art technology.

To keep the unit in the best condition, follow these instructions carefully:

•Do not attempt to disassemble the measuring platform.

•Store the unit horizontally, and place it so that the buttons will not be pressed accidentally.

•Avoid excessive impact or vibration to the unit.

•Place the unit in an area free from direct sunlight, heating equipment, high humidity, or extreme temperature change.

•Never submerge in water. Use alcohol to clean the electrodes and glass cleaner (applied to a cloth first) to keep them shiny;

avoid soaps.

•Do not step on the platform when wet.

•Do not drop any objects onto the platform.

Preparations Before Use

Inserting the Batteries

Open the battery cover on the back of the measuring platform. Insert the supplied AA-batteries

as indicated.

Note : Be sure that the polarity of the batteries is set properly. If the batteries are incorrectly

positioned the fluid may leak and damage floors. If you do not intend to use this unit

for a long period of time, it is advisable to remove the batteries before storage.

Please note that the included batteries from factory may have decreased energy levels over time.

Features and Functions

6.Personal keys 7.Weight-Only Key

5.Arrow (Select) Buttons

Accessories

8.AA-Size Batteries (4)

1.Display Screen

2.Ball-of Foot Electrodes

3.Heel Electrodes

4.Set Buttons

Open as shown.

Direction of the batteries.

Produktspezifikationen

Marke:	Tanita
Kategorie:	Waage
Modell:	InnerScan BC-590BT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tanita InnerScan BC-590BT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Waage Tanita

Tanita UM-028F Bedienungsanleitung

15 Oktober 2024

Tanita 1479J Bedienungsanleitung

9 Oktober 2024

Tanita ВС-351 Bedienungsanleitung

7 Oktober 2024

Tanita InnerScan BC-570 Bedienungsanleitung

30 September 2024

Tanita BF-662W Bedienungsanleitung

19 September 2024

Tanita KP-601 Bedienungsanleitung

14 September 2024

Tanita BC-581 Bedienungsanleitung

2 September 2024

Tanita BC-532 Bedienungsanleitung

20 August 2024

Tanita HD-395 Bedienungsanleitung

16 August 2024

Tanita BC-530 Bedienungsanleitung

10 August 2024

Bedienungsanleitung Waage

Neueste Bedienungsanleitung für -Kategorien-

PCE Instruments PCE-ABT 220L Bedienungsanleitung

16 Oktober 2024

PCE Instruments PCE-BSW 3 Bedienungsanleitung

16 Oktober 2024

PCE Instruments PCE-BT 200 Bedienungsanleitung

16 Oktober 2024

PCE Instruments PCE-BS 300 Bedienungsanleitung

16 Oktober 2024

PCE Instruments MPC-3 Bedienungsanleitung

16 Oktober 2024

PCE Instruments PCE-CS 10000N Bedienungsanleitung

16 Oktober 2024

PCE Instruments PCE-CS 300 Bedienungsanleitung

16 Oktober 2024

PCE Instruments PCE-PB 75N Bedienungsanleitung

16 Oktober 2024

PCE Instruments PCE-PB 200N Bedienungsanleitung

16 Oktober 2024

PCE Instruments PCE-WS 30 Bedienungsanleitung

16 Oktober 2024