Tacklife SC-L01 Bedienungsanleitung
Tacklife
Laserpointer
SC-L01
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tacklife SC-L01 (2 Seiten) in der Kategorie Laserpointer. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
- EN - - EN - - EN - - EN - - EN - - EN - - EN - - EN - - EN -
Shenzhen Temie Technology Co. Ltd.
Web:www.tacklife.net
E-mail:support@tacklife.net
ADD:No.31, Qing Linxi Road, Longgang
District,Shenzhen, Guangdong, China 518172 CN
Mini Cross Line Laser
Model: SC-L01
User Manual
Contents
Congratulations!
You have chosen one of our laser tools that’s guaranteed reliable and
tough for professional tool users at various job sites.
• Safety
• Product Overview
• Operation Modes
• Applications
• User Guide, Maintenance and Care
• Specifications
• Warranty
Product Overview
1. Laser Windows
2. Power/Lock
3. Battery Compartment
4. 1/4-20 Mounting Thread
1
2
Safety
WARNING:
Read the Safety Instructions and User Manual thoroughly before using this
product. All users must fully understand and adhere to these instructions.
CAUTION:
While the product is in operation, be careful not to expose your eyes to the
emitting laser beam (red or green light source). Exposure to a laser beam
for an extended time may be hazardous to your eyes.
CAUTION:
Glasses may be supplied in some of the laser tool kits. These are NOT
certified safety glasses. These glasses are ONLY used to enhance visibility of
beam in brighter environments or at greater distances from laser source.
WARNING:
The following label/print samples are placed on the product to inform of
the laser class for your convenience and safety.
• Do not stare directly into the beam or view directly with optical instruments
or set up the laser at eye level.
• Do not disassemble the laser tool. There are no user serviceable parts inside.
• Do not modify the laser in any way. Modifying the tool may result in
hazardous Laser Radiation Exposure.
• Do not operate the laser around children or allow children to operate
the laser. Serious eye injury may result.
• An exposure to the beam of a Class 2 laser is considered safe for a
maximum of 0.25 seconds. Eyelid reflexes will normally provide adequate
protection.
Applications
User Guide, Maintenance and Care
• The laser tool is sealed and calibrated at the plant to the accuracies
specified.
• It’s recommended to carry out an accuracy check before its first use
and periodic checks during future use especially for precise layouts.
• When not in use please power OFF the tool and place the pendulum
lock in its locked position.
• In Manual Mode, self leveling is OFF. The accuracy of the beam is not
ensured to be level.
• Do not short any battery terminals or charge alkaline batteries or dispose
of batteries in fire.
• Do not mix old and new batteries. Replace all of them at the same time
with new batteries of the same brand and type.
• Keep batteries out of reach of children.
• Remove batteries if the tool will not be used for several months.
• Do not store the laser tool in direct sunlight or expose it to high temperatures.
The housing and some internal parts are made of plastics and may
become deformed at high temperatures.
• Exterior plastic parts may be cleaned with a damp cloth. Although
these parts are solvent resistant, NEVER use solvents. Use a soft, dry cloth
to remove moisture from the tool before storage.
• Store the tool in its case when not in use. If storing for extended time,
remove batteries before storage to prevent possible damage.
3
4
Warranty
We are confident of the quality of our products and offer outstanding
guarantee for professional users of the products. This statement is in addition
to and in no way prejudices your contractual rights as a professional user
Laser Class
Laser Wavelength
Leveling Accuracy
Horizontal/Vertical Accuracy
Leveling/Compensation Range
Working Distance (Line)
Working Distance
(Line with Detector)
Power Source
IP Rating
Operation Temperature Range
Storage Temperature Range
Class 2 (IEC/EN60825-1/2007)
635±5nm
±4.5mm/15m
±4.5mm/15m
4°±1°
15m
approximately 12Hours
( )10 mw diode used to split beams
2×˝AA˝ (LR6)
IP54
-10 – 50℃ ＋ ℃
-20 – 70℃ ＋ ℃
or your statutory rights as a private non-professional user. We warrant our
laser level(s) against faults in materials and/or workmanship for one year
from date of purchase provided that:
• Proof of purchase is produced.
• Service/repairs have not been attempted by unauthorized persons;
• The product has been subject to fair wear and tear;
• The product has not been misused;
Defective products will be repaired or replaced, free of charge or at our
discretion, if sent together with proof of purchase to our authorized
distributor(s).
This Warranty does not cover faults caused by accidental damage, unfair
wear and tear, and use other than in accordance with the manufacturers’
instructions or repair or alteration of this product not authorized by us.
Repair or replacement under this Warranty does not affect the expiry date
of the Warranty.
To the extent permitted by law, we shall not be liable under this Warranty
for indirect or consequential loss resulting from faults in this product. This
Warranty may not be varied without our authorization. Calibration and
care are not covered by warranty.
NOTE:
The customer is responsible for the correct use and care of the tool. Moreover,
the customer is completely responsible for periodically checking the
accuracy of the laser, and therefore for the calibration of the tool
35m
Operating Time
Operation Modes
• Do not dispose of this product with household waste.
• Always dispose of batteries per local code.
• Please recycle in line with local provisions for the collection and disposal
of electrical and electronic waste under the WEEE Directive.
Specifications – Red Beams
1. Unlock the laser tool by switching to the Unlocked Position to turn the
laser tool ON and project the cross line.
2. Lock the laser tool by switching to the Locked Position to turn the laser
tool OFF and shut off the cross line.
3. Short press the key on the keypad while the laser tool is powered On in
the Unlocked Position to deactivate or activate out-of-self-leveling alert.
4. Laser beams will flash once every 5 seconds when out of self-leveling
range alert in the Unlocked Position is deactivated.
5. Laser beams will flash twice a second when the laser tool is out of its
self leveling range in the Unlocked Position with its self-leveling range
alert activated.
Produktspezifikationen
| Marke: | Tacklife |
| Kategorie: | Laserpointer |
| Modell: | SC-L01 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Tacklife SC-L01 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Laserpointer Tacklife
22 August 2024
Bedienungsanleitung Laserpointer
- Laserpointer Da-Lite
- Laserpointer Connect IT
- Laserpointer Hama
- Laserpointer Kensington
- Laserpointer Nedis
- Laserpointer SilverCrest
- Laserpointer Makita
- Laserpointer Bosch
- Laserpointer Laserliner
- Laserpointer Parkside
- Laserpointer Velleman
- Laserpointer Black And Decker
- Laserpointer Cocraft
- Laserpointer Ryobi
- Laserpointer Skil
- Laserpointer Hilti
- Laserpointer DeWalt
- Laserpointer Kaiser
- Laserpointer BeamZ
- Laserpointer Stairville
- Laserpointer Stanley
- Laserpointer Bushnell
- Laserpointer United Office
- Laserpointer Led Lenser
- Laserpointer Nikon
- Laserpointer Carson
- Laserpointer Leica
- Laserpointer Eurolite
- Laserpointer Milwaukee
- Laserpointer Toolcraft
- Laserpointer Melinera
- Laserpointer GPO
- Laserpointer Powerplus
- Laserpointer Vortex
- Laserpointer Cameo
- Laserpointer Speed-Link
- Laserpointer Stabila
- Laserpointer ADA
- Laserpointer Sola
- Laserpointer Steren
- Laserpointer Uni-T
- Laserpointer Laserworld
- Laserpointer Kreator
- Laserpointer Perfect Choice
- Laserpointer Klip Xtreme
- Laserpointer Meopta
- Laserpointer Prexiso
- Laserpointer Picotronic
Neueste Bedienungsanleitung für -Kategorien-
4 Oktober 2024
30 September 2024
24 September 2024
15 September 2024
12 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024