Syscom KDP-602GD Bedienungsanleitung

Syscom Türsprechanlage KDP-602GD

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Syscom KDP-602GD (2 Seiten) in der Kategorie Türsprechanlage. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Button

Internal call and

communication

Power Lamp

To check power and operating status:

ON : Power ON /

Communication Connected

OFF : Power OFF

Flicker : Call ringing

■

Name of Each Part

EXPANSION DOOR PHONE(KDP-602GD)

As this device consists of precise electronic components, and high

voltage is generated internally, do not attempt to disassemble.

Do not drop lndoor or outdoor station, and avoid strong impact.

When cleaning, never use wet hands, volatile benzene or paint thinner.

Keep away from humidifier and stove. High temperature and humidity

can cause malfunction

Maintain the product clear by frequently cleaning doorstation with

soft cloths

6. This product is doorphone which works with Lobbyphone model

KLP-C420 / C420R and Repeater KVS-A4P/A8P.

7. Recommed to use an external DC adaptor provided by kocom,

if not, this may cause bad quality of audio.

Precautions for Operation

Button

D s w soor open hen thi

button i pre eds ss .

A evailable only for th

door equipped itw h

door opener.

Volume

control



To control calling

s .ignal volume

Description KDP-602GD

Electric source DC 13±1V only (External DC 15V adadptor)

Power Consumption In Load 2.5W

Sound Electronic chime

Wiring 4 Wired in polarity

Vcc / GND / Audio / +13V

From KVS-A4P/A8P to the last KDP-602GD,

max. 80M using CAT5 single cable, and

150M using CAT5 pair cables.

"From KLP-C420 / C420R to the last KDP-602GD,"

max. 150M using CAT5 single cable,

and max. 300M using CAT5 pair cables.

Cable Specs.

and max. distance

■

Specifications

■

How to operation

DOORPHONE

KDP-602GD USER S MANUAL’

1. Communcation with lobbyphone (KLP-C420 / C420R)

2. Internal call and communication

(1) A visitor makes a call to the house.

(2) The doorphone rings.

(3) Pick up the handset to start communication with visitor.

(4) When communicacation ends, hang up the handset.

(1) Pick up the handset and press button on the doorphone.

(2) The extended monitor or doorphone is ringing.

(3) Then, when the handset of the extended doorphone is picked up,

the internal communication starts.

(4) When communicacation ends, hang up the handset.

3. Door open

When the door open button is pressed during the communication

between the lobbyphone and the doorphone, door opens.

A- Choose a place on the wall where you want to hang the

DOOR PHONE.

B- Fasten the wall hanger on the wall.

C- DOOR PHONE can be hung on the wall hanger easily now.

■

Installation

N0530KDP-602GD

·Doorphone ·Wall hanger Pannel

■

Component

·Install wire ·Screw

3×12mm (2ea)

LOB_

HOUSE1

HOUSE2

KDP-602GD

Warranty Card

MODEL

DATE PURCHASED

WARRANTY PERIOD

AGENCY

AGENCY ADDRESS

◉KOCOM Warranties the original purchaser of this product as follows.

1) This product is produced under strict quality control and inspection procedures.

2) If this product breaks down during proper use as a result of product defect, KOCOM will repair it within one year

from date of purchase as free of charge.

3) The following cases will be subject to charge, even during warranty period:

a. Breakdown during transport, or through careless treatment,by consumer.

b. Breakdown caused by unauthorized repair, or system modification.

c. Breakdown caused by natural disaster or power disorder.

Wiring Diagram

■

OUT

4 4 4

1. VCC

2. GND

3. AUDIO

4. +13V

※ How to connect +15V DC adaptor

① On EX_POWER PORT of KVS-A4P/A8P, connect a DC 15V adaptor and connect them to +13V and GND of the doorphone in parallel.

② Connect pin no. 1(+13V) and no. 2(GND) of On LOB_IN or LOB_OUT PORT of KVS-A4P/A8P to +13V and GND of the doorphone in parallel.

VCC

GND

AUDIO

+13V

Polarity

EX_POWER LOB_OUT LOB_IN CN1

HOUSE1

HOUSE2

HOUSE3

HOUSE4

HOUSE5

HOUSE6

HOUSE7

HOUSE8

1. VCC

2. GND

3. AUDIO

4. +13V

KDP-602GD

BOT VIEW

4 wire polarity

ADAPTER

DC 15V/2A

KVS-A4P

KVS-A8P

KVS-A4P

KVS-A8P

ADAPTER

DC 15V/2A

+15V

GND

EX_POWER

1. VCC

2. GND

3. AUDIO

4. +13V

KDP-602GD

BOT VIEW

4 wire polarity

1. VCC

2. GND

3. AUDIO

4. +13V

+15V

GND

LOB_OUT

EX_POWER

HOUSE1

HOUSE2

HOUSE

KVS-A4P

KVS-A8P

KVS-A4P

KVS-A8P

Produktspezifikationen

Marke:	Syscom
Kategorie:	Türsprechanlage
Modell:	KDP-602GD
Produkttyp:	Telefon
Produktfarbe:	Weiß
Befestigungstyp:	Wand
Kompatibilität:	KLPC420
Markenkompatibilität:	Kocom