Syma X23W Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Syma X23W (17 Seiten) in der Kategorie Drohnen. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/17
8+
1
4-CHANNEL PRESSURE FIXED POSITION HOVERING REMOTE CONTROL DRONE
GYRO REMOTE CONTROL SERIES
USER MANUAL
MAIN FEATURES
● Utilizes the 4-axis structure, enabling the drone to be even more
flexible, speedy.It can fly indoor.
● Built-in 6-axis gyro stabilizer to ensure accurate positioning
in-flight.
● The structure uses a modular design which makes it easy to
install and repair.
● Headless function making it easy for directional control.
● 360° stunt flip.
● Pressure-fixed-position hovering function for Auto Hover Mode.
● Auto take-off and landing.
● HD real-time transmission aerial for getting the fun of
different photography.
-1-
1. Please store the smaller-sized drone accessories in places that are out
of reach of children.
2. This drone is very powerful. For all first-time flights, the left joystick
must be slowly pushed up in order to prevent the drone from ascending
too fast to avoid unnecessary collision and possible damage or injury.
3. When the flight is ended, first turn off the power of the remote control.
Then turn off the power of the drone.
4. Avoid placing the batteries in places with high temperatures and
exposure to heat.
5. Take extra precaution to ensure that the drone is at a minimum distance
of 15 feet from the pilot, other people, and animals in order to prevent
bodily injury during flight operation.A minimum separation distance of 20
cm must be maintained between the user's body and the device under
normal use condition.
6. This drone is for people ages 8+. It must be flown always within the
line of sight of the pilot (or instructor) and flown safely.
7. Non-rechargeable batteries are not to be recharged;Batteries are to be
inserted with the correct polarity;Different types of batteries or new and
used batteries are not to be mixed.
8. When the drone is not in use, please remove the batteries in the remote
control.
9. The supply terminals are not to be short-circuited.
10.Discharge the battery to 40%-50% On a full charge, fly for half of the （
total flight time if it will not be used for 10 days or more this can ） ，
greatly extend the battery life.
11.Please keep a safe distance from the spinning propellers to avoid injury.
12.To ensure the electromagnetic environment requirement of the aviation radio
(station), using remote controls in the zone, which is in a radius of about
5000m zone from the circle center of the airport runway, is forbidden. All
users also should abide by the regulation of the radio set forth by government
and regulatory agencies including the duration and area.
13.Only uses the recommended transformer for the model, and the transformer
is not a model. Disconnect the transformer from the model which is available
cleaning with liquids before cleaning. Check the cord, plug, enclosure and
other parts of the transformer regularly. If any damages have been discov
ered, please immediately stop using it, until it was completely repaired.
14.Never look steadily at the laser beam since the laser radiation.
15.Attention Drone assembly under adult supervision.：
16.The pilot is responsible for the safe operation and safe distance from
uninvolved persons and property on the ground and from other airspace
users and shall never fly the drone above crowds (> 12 persons).
17.The packing has to be kept since it contains important information.
1. Use dry and soft cloth to clean this product.
2. Avoid exposing this product to heat.
3. Do not immerse this product in water, otherwise, the electronic parts will be damaged.
4.Transformers used with the toy are to be regularly examined for damage to the cord,
plug,enclosure and other parts,and that,in the event of such damage,the toys must be
used with this transformer until the damage has been repaired.
Safety Guide
Repair and maintenance
-2-
2. Press the flexible
accessory latch on
the battery and pull
it backwards
3. Align the charging head
of the USB charging
cable with the charging
port of the battery
The following items can be found in this product package:
Package Description
• Drone
• Remote Control
• Instruction Manual
• Main Blades
• USB Charging Cable
• Mobile Phone
Retaining Clip
Phone Clip Attachment/Removal Method
Phone clip holder
installation:
1.Insert the phone clip holder
into the connector at the
top of the remote control.
Phone clip holder
removal:
3.Hold the elastic
accessory lock on the
back of the phone clip
and pull it out.
Battery Changing And
Charging Methods For Drone
Battery changing methods for drone
1.Press the power button on
the top of the drone to 1-2S
make sure the drone is
turned “OFF”.
Battery charging methods for drone
Connect the battery cord to the USB then ,
connect the USB interface to the computer.
(The indicator light of the drone will turn on
while charging,and turn off when charging
completed.It takes about 130 minutes to
completely charge the battery. )
2. Press the handles to
adjust the jaws.
Produktspezifikationen
| Marke: | Syma |
| Kategorie: | Drohnen |
| Modell: | X23W |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Syma X23W benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Drohnen Syma
13 Oktober 2024
12 Juli 2024
10 Juli 2024
9 Juli 2024
Bedienungsanleitung Drohnen
Neueste Bedienungsanleitung für -Kategorien-
12 Oktober 2024
10 Oktober 2024
10 Oktober 2024
2 August 2024
10 Juli 2024
7 Juli 2024
8 Oktober 2022