Sylvania 6620LCT Bedienungsanleitung

Sylvania Fernsehen 6620LCT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sylvania 6620LCT (8 Seiten) in der Kategorie Fernsehen. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

FEATURES

●MTS/SAP Tuner

●181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.

●PLL Frequency Synthesized Tuning- Provides free and easy channel selection and lets

you tune directly to any channel using the channel number buttons on the remote control.

●Sleep Timer

●Closed Caption Decoder

●Auto Shut Off Function- If there is no signal input from the antenna terminal and no user

operation for 15 minutes, the TV will turn itself off automatically.

●V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.

●Full-Function Remote Control

●On-Screen Function Display

●S-VIDEO Input- Allows you to get better picture detail and clarity.

●Component Input

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con-

nected to the grounding system of the building as close to the point of cable entry as practical.

FCC WARNING - This equipment may

generate or use radio frequency energy.

Changes or modifications to this equip-

ment may cause harmful interference

unless the modifications are expressly

approved in the manual. The user could

lose the authority to operate this equip-

ment if an unauthorized change or

modification is made.

IF YOU NEED ADDITIONAL ASSISTANCE WITH SET-UP OR OPERATING AFTER

READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-968-3429 OR

VISIT OUR WEB SITE AT http://www.SylvaniaConsumerElectronics.com

Owner’s Manual

1EMN21765A Printed in China

L2620UA/L2600UA * * * *

6620LCT

20 INCH LCD TELEVISION

(Tilt Stand Type)

IMPORTANT SAFEGUARDS

1. READ INSTRUCTIONS - All the safety and operat-

ing instructions should be read before the appliance is

operated.

2. RETAIN INSTRUCTIONS - The safety and operat-

ing instructions should be retained for future reference.

3. HEED WARNINGS - All warnings on the appliance

and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS - All operating and use

instructions should be followed.

5. CLEANING - Unplug TV from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupt-

ed service and, that for some specific reason, such as

the possibility of the loss of an authorization code for a

CATV converter, is not intended to be unplugged by the

user for cleaning or any other purpose, may exclude the

reference to unplugging the appliance in the cleaning

description otherwise required in item 5.

6. ATTACHMENTS - Do not use attachments not rec-

ommended by the TV manufacturer as they may cause

hazards.

7. WATER AND MOISTURE - Do not use this TV near

water, for example, near a bath tub, wash bowl, kitchen

sink, or laundry tub, in a wet basement, or near a

swimming pool, and the like.

8. ACCESSORIES - Do not place this

TV on an unstable cart, stand, tripod,

bracket, or table. The TV may fall,

causing serious injury to someone, and

serious damage to the appliance. Use

only with a cart, stand, tripod, bracket,

or table recommended by the manufac-

turer, or sold with the TV.

Any mounting of the appliance should follow the man-

ufacturer’s instructions and should use a mounting

accessory recommended by the manufacturer. An appli-

ance and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may

cause the appliance and cart combination to overturn.

AMEUBLES - Cet appareil ne doit

être placé que sur un meuble (avec

ou sans roulettes) recommandé par

le fabricant. Si vous l’installez sur

un meuble à roulettes, déplacez les

deux ensembles avec précaution.

Un arrêt brusque, l’utilisation d’une

force excessive et des surfaces irrégulières risquent de

déstabiliser l’ensemble et de le renverser.

9. VENTILATION - Slots and openings in the cabinet

and the back or bottom are provided for ventilation and

to ensure reliable operation of the TV and to protect it

from overheating, these openings must not be blocked

or covered. The openings should never be blocked by

placing the TV on a bed, sofa, rug, or other similar sur-

face. This TV should never be placed near or over a

radiator or heat register. This TV should not be placed in

a built-in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instructions have been adhered to.

10. POWER SOURCES - This TV should be operated

only from the type of power source indicated on the

marking label. If you are not sure of the type of power

supply to your home, consult your appliance dealer or

local power company. For TVs intended to operate

from battery power, or other sources, refer to the oper-

ating instructions.

11. GROUNDING OR POLARIZATION - This TV is

equipped with a polarized alternating-current line plug

(a plug having one blade wider than the other). This

plug will fit into the power outlet only one way. This is

a safety feature. If you are unable to insert the plug fully

into the outlet, try reversing the plug. If the plug should

still fail to fit, contact your electrician to replace your

obsolete outlet. Do not defeat the safety purpose of the

polarized plug.

12. POWER-CORD PROTECTION - Power-supply

cords should be routed so that they are not likely to be

walked on or pinched by items placed upon or against

them, paying particular attention to cords at plugs, con-

venience receptacles, and the point where they exit

from the appliance.

PORTABLE CART WARN ING

S3126A

13. OUTDOOR ANTENNA GROUNDING - If an outside

antenna or cable system is connected to the TV, be sure

the antenna or cable system is grounded so as to provide

some protection against voltage surges and built-up stat-

ic charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with respect

to proper grounding of the mast and supporting struc-

ture, grounding of the lead-in wire to an antenna dis-

charge unit, size of grounding conductors, location of

antenna-discharge unit, connection to grounding elec-

trodes, and requirements for the grounding electrode.

(Fig. A)

14. LIGHTNING - For added protection for this TV receiv-

er during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from the

wall outlet and disconnect the antenna or cable system.

This will prevent damage to the TV due to lightning and

power-line surges.

15. POWER LINES - An outside antenna system should

not be located in the vicinity of overhead power lines or

other electric light of power circuits, or where it can fall

into such power lines or circuits. When installing an

outside antenna system, extreme care should be taken to

keep from touching such power lines or circuits as con-

tact with them might be fatal.

16. OVERLOADING - Do not overload wall outlets and

extension cords as this can result in a risk of fire or

electric shock.

17. OBJECT AND LIQUID ENTRY - Never push

objects of any kind into this TV through openings as

they may touch dangerous voltage points or short out

parts that could result in a fire or electric shock. Never

spill liquid of any kind on the TV.

18. SERVICING - Do not attempt to service this TV

yourself as opening or removing covers may expose

you to dangerous voltage or other hazards. Refer all

servicing to qualified service personnel.

19. DAMAGE REQUIRING SERVICE - Unplug this

TV from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

a. When the power supply cord or plug is damaged or

frayed.

b. If liquid has been spilled, or objects have fallen into

the TV.

c. If the TV has been exposed to rain or water.

d. If the TV does not operate normally by following the

operating instructions. Adjust only those controls that

are covered by the operating instructions, as improper

adjustment of other controls may result in damage and

will often require extensive work by a qualified techni-

cian to restore the TV to its normal operation.

e. If the TV has been dropped or damaged in any way.

f. When the TV exhibits a distinct change in performance,

this indicates a need for service.

20. REPLACEMENT PARTS - When replacement parts

are required, be sure the service technician uses

replacement parts specified by the manufacturer that

have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric

shock, injury to persons or other hazards.

21. SAFETY CHECK - Upon completion of any service

or repairs to this TV, ask the service technician to per-

form routine safety checks to determine that the TV is

in proper operating condition.

22. HEAT - This TV product should be situated away

from heat sources such as radiators, heat registers,

stoves, or other products (including amplifiers) that

produce heat.

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

E L E CT R IC

SE RVI C E

E Q U I PM E N T

G R OU N D

C L A M P

N EC - N ATI O N A L EL E C T RI C AL C O D E POW ER S E RVIC E G ROU N D I N G

EL EC T ROD E S YS T E M

( N E C A RT 2 5 0, PART H )

S 2 8 9 8 A

G R OU N D C L A MP S

G R OU N DIN G C O N D U CT OR S

( N E C S EC T ION 81 0 - 2 1)

A N T E N N A

DIS CH AR GE U N IT

( N E C S EC T ION 81 0 - 2 0)

A N T E N N A

L E AD IN

WIR E

SYMB OLE D'AVERTISSEMENT POUR

LES COMPOSANT ES

APPAREIL ET M EUB LE A ROULETTES

S3126A

PRECAUTIONS

●Place your TV in a room with adequate ventilation.

●Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.

●Do not place your TV on soft surfaces, such as rugs or blankets.

●Leave enough room for air to circulate around the bottom, top and back of the set.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

The serial number of this product may be found on the back of the TV. No others have the same

serial number as yours. You should record the number and other vital information here and retain

this book as a permanent record of your purchase to aid identification in case of theft.

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from

the date of original retail purchase. Certain parts and LCD image burn-in are not covered under

this warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date

of original retail purchase.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT

OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE

PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or

if service was attempted by an unauthorized service center. This limited warranty does not apply to any product not

purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does

not cover damage which occurs in shipment, failures which are caused by repairs, alterations or product not supplied

by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alteration,

faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or damage

which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE

CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY

GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE

USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF

FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN

THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE

CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SER-

VICE CENTER.

THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT.

IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS

COSTS WILL BE CHARGED.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS

THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE

UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI

CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR

NOTICE.

WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:

To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original

packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI

CORP. will not reimburse you for any service done by unauthorized service providers without prior written approval.

To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please contact us at :

FUNAI CORPORATION

Customer Service

Tel :1-800-968-3429

http://www.SylvaniaConsumerElectronics.com

19900 Van Ness Avenue, Torrance, CA 90501

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI-

ANCE TO RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK) NO

USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT

DANGEROUS VOLTAGE CONSTITUT-

ING A RISK OF ELECTRIC SHOCK IS

PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT

THERE ARE IMPORTANT OPERAT-

ING AND MAINTENANCE INSTRUC-

TIONS IN THE LITERATURE

ACCOMPANYING THE APPLIANCE.

The important note is located on the rear of the cabinet.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

INSTALLING THE BATTERIES

Install two AAA batteries (supplied)

matching the polarity indicated inside

battery compartment of the remote

control.

[BATTERY PRECAUTIONS]

• Be sure to follow the correct polarity as indicated in the battery compartment.

Reversed batteries may cause damage to the device.

• Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries

with fresh ones.

• If the device is not to be used for a long period of time, remove the batteries to prevent

damage or injury from possible battery leakage.

• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.

PREPARATION FOR USE

CONNECTIONS

VIDE O2

AUDIO

VI DEO1

S-V

ID EO

VIDEO

HEAD PHO N

ANT

AUD IO

COMP ONENT

S-V I D E

V I D E O

ANT

H E A D P H O N E

V ID E O 1

AUD

I O

OPERATIONS

VIDEO2 input

PONEN

ID E

AUDIO

Note:

●If some digits appear in the corner of the screen when the unit is turned on at the first time,

press [POWER] without unplugging the power cord.

Audio Cable

Video Cassette

Recorder

Notes:

●The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for

connecting monaural audio equipment.

●The S-VIDEO jack is given priority over the VIDEO jack.

Component

Video Cable

Audio Cable

Video Game

Video Camera

Rear of this TV

Notes:

●This TV can accept 480p / 480i / simplified 1080i video signal.

●Simplified 1080 video signal differs to the original 1080i video signal because it is displayed

after converted into 480p signal.

REMOTE CONTROL AND TOP PANEL FUNCTION

123

4 5 6

7 8 9

0 +100

MUTE SLEEP

DISPLAY

CH RET

INPUT

SELECT

POWER

VOL

POWER button

To turn TV on/off

Channel number buttons

Press two digits to directly access the

desired channel. Remember to press

a "0" before a single digit channel.

CH K

K/L

Lbuttons

To select channels and move

up/down through menu items

MENU button

To view on-screen menu SLEEP button

To set Sleep Timer

DISPLAY button

To display CH No./Audio Status

CH RET button

To return to previous channel

INPUT SELECT button

To select TV or external input

MUTE button

To mute sound

VOL X

X/Y

Ybuttons

To adjust volume

To decide the command of settings

SELECT

POWER

VOLUME

CHANNEL

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO

WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA

PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET

POUSSER JUSQU’AU FOND.

[EXTERNAL CONNECTION]

ex.

VIDE O2

AUDI O

VIDE O1

S-VI DE

VI DE O

HEAD P

HONE

ANT

AU DIO

COMP ONEN T

ANT

OUT

(OUT)

(IN)

(OUT)

(IN)

Note:

•For your safety and to avoid damages to the unit, unplug the antenna cable from the

ANT jack before moving the unit.

(OUT)

Video Cable

S-Video Cable

(IN)

SELECTING AUDIO/VIDEO INPUT

When you use the AUDIO/VIDEO input jacks, select “VIDEO1” or “VIDEO2” mode by

pressing [INPUT SELECT] on the remote control or [SELECT] on the main unit. The input

mode changes by pressing the button as following:

TV channel VIDEO1VIDEO2

INPUT

SELECT

VIDEO1 input

You can bracket this product as wall mounting TV using the arm adapted for 100mm (commercially available).

POWER button

To turn TV on/off

VOLUME X

X/Y

Ybuttons

To adjust volume

SELECT button

To select TV or external input

CHANNEL K

K/L

Lbuttons

To select channels

MENU button

To view on-screen menu

Infrared Sensor Window

Plug the incoming cable into the ANT jack on the rear of the TV.

NOTE (DO NOT DISCONNECT FROM BOX)

Some cable TV systems use scrambled signals

and require a special converter to receive these

channels. Consult your local cable company.

Rear of this TV

Incoming cable from home Antenna /

Cable Company (No Cable Box)

Incoming cable from Cable

Company or Satellite Antenna

Cable Box or

Satellite Box*

Cable

TV signal Antenna

IR transmitter

To send infrared ray (IR) signal

Note:

●You can test if the remote control sends out the infrared signal with an AM radio.

(Refer to “TROUBLESHOOTING GUIDE”.)

Tilt Stand

Adjust the stand to change the angle of TV (-5 ~ 10° °).

-5°10°

TILT STAND

UNPACKING

Do not bend from this side.

The stand of this TV is folded when you pur-

chased. Place this TV face-down on a flat

surface covered with the soft cloth. Bend the

stand slowly to forward until it clicks.

If you want to fold the stand again, insert a

thin rod into the hole in the right side of the

stand as illustrated, bend the stand backward

while you keep pushing the hole.

+100 button

Press to select cable channels

higher than 99.

Notes:

●In case no channel can be received by the channel scanning, “NO TV SIGNALS” is displayed on

the screen. Turn off the unit and check the antenna connection, then follow step 1 again.

●

If those settings do not work properly, please call our help line on the front page of this owner's manual.

2If the TV screen shows

snow noise and there is

no operation for more

than 5 seconds,

“HELPFUL HINTS”

appears. Follow the

instructions listed on-

screen.

Select the desired

language according to

the screen indication.

After that, the TV

performs “AUTO

PRESET CH” to scan

channels available for

the broadcasting in

your area.

When the scanning is completed, or [MENU] is pressed during channel scanning to cancel it, the

tuner stops on the lowest memorized channel.

SELECT LANGUAGE

ENGLISH NEXT:PRESS CHK

ESPAÑOL DESPUÉS:PRESIONE CH L

FRANÇAIS APRÈS:PRESSEZ VOLX

– INITIAL SETUP –

PLEASE CONNECT ANTENNA OR CABLE

OR SATELLITE TO THIS UNIT.

THEN PRESS CH K,

IN ORDER TO PERFORM

“AUTO PRESET CH ”.

INITIAL SETUP

When you turn on the power for the first time, the “SELECT LANGUAGE” menu is displayed.

The “INITIAL SETUP” menu is displayed every time you turn on the unit unless the scanning is completed.

1- HELPFUL HINTS -

1. PLEASE CHECK TO SEE IF THE

ANTENNA/CABLE/SATELLITE IS

PROPERLY CONNECTED.

2. DID YOU PERFORM “AUTO PRESET CH” ?

3. PLEASE REFER TO FRONT PAGE OF THE

OWNER’S MANUAL OR REAR PANEL FOR

SUPPORT LINE INFORMATION.

Cables not included

[TEXT MODE (TEXT1, TEXT2)]

●TEXT1 and TEXT2

display half-screen text

by scrolling (such as a

channel guide, schedule

or announcement).

OPERATIONS (Continued)

OPTIONAL SETTINGS

PICTURE ADJUSTMENT

VOL

- TV SET UP -

PICTURE

CHANNEL SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

TV SOUND [MAIN]

BACK LIGHT [BRIGHT]

SLEEP [0] MINUTE

BRIGHTNESS

Adjust until the darkest parts of the picture are

as bright as you prefer.

[-] : decrease brightness

[+] : increase brightness

CONTRAST

Adjust to increase or decrease contrast.

[-] : decrease contrast

[+] : increase contrast

COLOR

Adjust to be brilliant or pale color.

[-] : be pale color [+] : be brilliant color

TINT

Adjust to obtain natural skin tones.

[-] : add red [+] : add green

SHARPNESS

Adjust the detail of the picture.

[-] : less clear [+] : more clearer

Note:

●The display will disappear automatically

after 10 seconds unless you press any but-

tons.

CHANNEL SETTING

- TV SET UP -

PICTURE

CHANNEL SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

TV SOUND [MAIN]

BACK LIGHT [BRIGHT]

SLEEP [0] MINUTE

- TV SET UP -

PICTURE

CHANNEL SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

TV SOUND [MAIN]

BACK LIGHT [BRIGHT]

SLEEP [0] MINUTE

VOL

Select the desired language

To exit the menu

VOL

- CHANNEL SET UP -

ADD/DELETE CH (TV)

AUTO PRESET CH

NO TV SIGNAL

LANGUAGE SELECTION

- TV SET UP -

PICTURE

CHANNEL SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

TV SOUND [MAIN]

BACK LIGHT [BRIGHT]

SLEEP [0] MINUTE

VOL

- CHANNEL SET UP -

ADD/DELETE CH (TV)

AUTO PRESET CH

Select the channel you wish

VOL

Notes:

●If closed captioning is not broadcasted, you

cannot receive it and nothing is displayed.

●When your TV receives a special effects

playback signal (i.e., Search, Slow and Still)

from a VCR’s video output channel (CH3 or

CH4), the TV may not display the correct

caption or text.

●Captions and texts may not match the TV

voice exactly.

●Interference may cause the closed caption

system not to function properly.

●The caption or text characters will not be

displayed while the menu display or

functions display is shown.

●If a black box appears on the screen, this

means that the TV is set to TEXT mode. To

clear screen, select [CAPTION1],

[CAPTION2] or [OFF].

Add: light blue

Delete: light red

Select “PICTURE” Select “LANGUAGE”

[ENGLISH] [ESPAÑOL]

[FRANÇAIS]

Select “CHANNEL SET UP”

Select “ADD/DELETE CH”Select “AUTO PRESET CH”

ADD/DELETE

Add or delete the channel

You may view specially labeled (cc) TV

programs, movies, news and prerecorded

tapes, etc. with either a dialogue caption or

text display added to the program.

- TV SET UP -

PICTURE

CHANNEL SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

TV SOUND [MAIN]

BACK LIGHT [BRIGHT]

SLEEP [0] MINUTE

Select “CAPTION”

[CAPTION MODE (CAPTION1, CAPTION2)]

●CAPTION1

displays standard closed captions (what a

character is saying).

●CAPTION2

displays foreign language closed captions

(foreign language words showing what a

character is saying).

●There are three ways of displaying

according to programs:

Paint-on mode: Displays input characters

on the screen immediately.

Pop-on mode : Once characters are stored

in memory, they are

displayed all at once.

Roll-up mode : Displays the characters

continuously by scrolling

(max. 4 lines).

*Second Audio Program (SAP) :

Your program can also be received in a

second language or sometimes a radio

station.

MULTI-CHANNEL TELEVISION SOUND (MTS)SYSTEM

Regular -None-

STEREO

SAP

Stereo

broadcast

Selection

Type of

broadcast

MAIN MONO SAP*

-None- -None-

MONO STEREO

SAPMAIN MAIN

Note:

●If you select [SAP] when second audio is

not available, the TV will receive normal

audio.

VOL

Select the desired sound

mode

[MAIN] [MONO] [SAP]

- TV SET UP -

PICTURE

CHANNEL SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

TV SOUND [MAIN]

BACK LIGHT [BRIGHT]

SLEEP [0] MINUTE

Select “TV SOUND”

To exit the menu

VOL

Notes:

●When you disconnect the unit from the AC

outlet or when you have a power failure, the

sleep time will be lost.

●

To cancel the sleep timer,

press repeatedly[SLEEP]

until “SLEEP 0 MINUTE”

is displayed.

●

The Sleep Timer Setting

display will disappear

automatically after 10 seconds of the operation.

●You can also set the Sleep Timer by press-

ing repeatedly.[SLEEP]

SLEEP TIMER SETTING

- TV SET UP -

PICTURE

CHANNEL SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

TV SOUND [MAIN]

BACK LIGHT [BRIGHT]

SLEEP [0] MINUTE

SLEEP 10 MINUTE

• The time increases by 10

minutes up to 90.

VOL

Select the desired caption mode

To exit the menu

[OFF]

[CAPTION1] [CAPTION2]

[TEXT2] [TEXT1]

CLOSED CAPTION

BACK LIGHT SETTING

- TV SET UP -

PICTURE

CHANNEL SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

TV SOUND [MAIN]

BACK LIGHT [BRIGHT]

SLEEP [0] MINUTE

Select “BACK LIGHT”

2Select the desired brightness mode

VOL

[BRIGHT]

[NORMAL]

[DARK]

To exit the menu

2Select an item to adjust

VOL

BRIGHTNESS

- +

[BRIGHTNESS] [CONTRAST]

[SHARPNESS] [TINT]

[COLOR]

Adjust the setting

... +

... –

VOL

Select “SLEEP”

[AUTO PRESET CHANNELS]

Channel presetting is necessary at the start or

in case you moved the TV to a different area.

This feature automatically scans and memo-

rizes all available channels in your area and

lets you easily select with [CH ▲ ▼/ ].

[ADDING/DELETING CHANNELS]

You can add channels that was not memorized

by AUTO PRESET CH due to the bad recep-

tion status and also delete channels you no

longer receive or seldom watch.

The tuner starts scanning automatically.

(completed)

The lowest memo-

rized channel appears.

(in failure)

Check antenna con-

nection and try again.

After scanning

Note:

●The TV may recognize TV channels as

CATV channels if reception condition is

poor. If this happens, check the antenna

connections and try scanning again when

reception conditions are better.

123

456

789

0 +100

Produktspezifikationen

Marke:	Sylvania
Kategorie:	Fernsehen
Modell:	6620LCT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sylvania 6620LCT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Fernsehen Sylvania

Sylvania 6509DD Bedienungsanleitung

18 August 2024

Sylvania 3819LC Bedienungsanleitung

17 August 2024

Sylvania LV448HG Bedienungsanleitung

17 August 2024

Sylvania 6419TD Bedienungsanleitung

16 August 2024

Sylvania 6419CTA Bedienungsanleitung

16 August 2024

Sylvania 6427CTF Bedienungsanleitung

16 August 2024

Sylvania LC260SS8 Bedienungsanleitung

15 August 2024

Sylvania KVS600A Bedienungsanleitung

15 August 2024

Sylvania 6432TE Bedienungsanleitung

15 August 2024

Sylvania 6719DC Bedienungsanleitung

15 August 2024

Bedienungsanleitung Fernsehen

Neueste Bedienungsanleitung für -Kategorien-

Sony KE-65A8 Bedienungsanleitung

16 Oktober 2024

Samsung QN85QN800AF Bedienungsanleitung

16 Oktober 2024

Thomson 24TM2490 Bedienungsanleitung

16 Oktober 2024

Daewoo DSJ-5520 Bedienungsanleitung

15 Oktober 2024

Sharp LC-52D65U Bedienungsanleitung

15 Oktober 2024

Hisense 50A7100FTUK Bedienungsanleitung

15 Oktober 2024

Salora LCD 1941 DVX Bedienungsanleitung

15 Oktober 2024

Grundig 65 CUA 7390 Mailand Bedienungsanleitung

15 Oktober 2024

Grundig 50 GUB 6300 Bedienungsanleitung

15 Oktober 2024

Grundig 40 CFA 6490 Venedig Bedienungsanleitung

15 Oktober 2024