Swann PRO-754 Bedienungsanleitung

Swann Sicherheitskamera PRO-754

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Swann PRO-754 (12 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

PRO-754

Pan, Tilt and Zoom Dome Camera

INSTRUCTION MANUAL

Limited Warranty Terms & Conditions

Swann Communications warrants this product against defects in workmanship and material for a period of one

(1) year from its original purchase date. You must present your receipt as proof of date of purchase for warranty

validation. Any unit which proves defective during the stated period will be repaired without charge for parts or

labour or replaced at the sole discretion of Swann. The end user is responsible for all freight charges incurred

to send the product to Swann’s repair centres. The end user is responsible for all shipping costs incurred when

shipping from and to any country other than the country of origin.

The warranty does not cover any incidental, accidental or consequential damages arising from the use of or the

inability to use this product. Any costs associated with the fitting or removal of this product by a tradesman or other

person or any other costs associated with its use are the responsibility of the end user. This warranty applies to the

original purchaser of the product only and is not transferable to any third party. Unauthorized end user or third

party modifications to any component or evidence of misuse or abuse of the device will render all warranties void.

By law some countries do not allow limitations on certain exclusions in this warranty. Where applicable by local

laws, regulations and legal rights will take precedence.

For Australia: Our goods come with guarantees which cannot be excluded under Australian Consumer Law. You are

entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable

quality and the failure does not amount to major failure.

FCC Verification

NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• These devices may not cause harmful interference, and

• These devices must accept any interference received, including interference that may cause undesired

operation.

Important Note:

All jurisdictions have specific laws and regulations relating to the use of cameras. Before using any camera for any

purpose, it is the buyer’s responsibility to be aware of all applicable laws and regulations that prohibit or limit the use

of cameras and to comply with the applicable laws and regulations.

WARNING

Modifications not approved by the party responsible for compliance could void user’s authority to

operate the equipment.

IMPORTANT SAFETY INSTRUCTIONS

• Make sure product is fixed correctly and stable if fastened in place.

• Do not operate if wires and terminals are exposed.

Before You Begin

Contents

Quick Reference

Power Supply

Before You Begin 1

Contents 2

Quick Reference 2

Power Supply 2

Introduction 3

Layout of the Camera 3

Layout of the OSD Controller 4

Notice about this Manual 4

Camera Installation

Choosing the Location 5

Attaching the Mount 6

Mounting the Camera 6

Connection Guide 7

DVR Configuration

Configuring the PTZ Settings 8

Changing the Camera’s Command Address 8

Camera Operations 9

Advanced Feature: On-Screen Display 9

Troubleshooting 10

Helpdesk / Technical Support Details Rear Cover

Default PTZ Configuration

Command Address: 1

Protocol: Pelco-D

Baud Rate: 9600bps

RS485 Polarity: +A Red Wire

-B Black Wire

• Be sure to use only the 15V power adapter that is supplied with the PRO-754. Basically,

it’s got a little extra juice to power the infrared LED arrays in the dome at the same

time as the camera.

• Don’t use the 15V power supply for other cameras. Likewise, don’t use other camera’s

power supplies with the PRO-754. Doing so may cause unintended damage to the

camera.

Produktspezifikationen

Marke:	Swann
Kategorie:	Sicherheitskamera
Modell:	PRO-754
Schutzfunktion:	Staubresistent
WLAN:	Nein
Breite:	76 mm
Tiefe:	120 mm
Mitgelieferte Kabel:	BNC
Produktfarbe:	Weiß
Internationale Schutzart (IP-Code):	IP66
Übertragungstechnik:	Kabelgebunden
Höhe:	210 mm
Befestigungstyp:	Decke/Wand
Betriebstemperatur:	-10 - 50 °C
Eingebauter Ethernet-Anschluss:	Nein
Power over Ethernet (PoE):	Nein
Typ:	CCTV Sicherheitskamera
Kabellänge:	18 m
Betriebsanleitung:	Ja
Gehäusematerial:	Aluminium
Analoges Signalformatsystem:	NTSC,PAL
Full-HD:	Nein
Zoom-Fähigkeit:	Ja
Größe des Bildsensors:	1/3 Zoll
Blickwinkel (FOV):	50 °
PTZ Kontrolle:	Ja
Formfaktor:	Kuppel
Brennweitenbereich:	5 - 50 mm
Anzahl der Kameras:	1
Tag/ Nachtmodus:	Ja
Mindestbeleuchtung:	0.1 Lux
Eingebaute HDD:	Nein
Nachtsichtdistanz:	30 m
Sensor-Typ:	CCD
Optischer Zoom:	10 x
Schrauben enthalten:	Ja
Nachtsicht:	Ja
BNC Ausgänge:	1
Anzahl der TV-Linien:	700
NTSC Auflösung:	976 x 494 Pixel
PAL Auflösung:	976 x 582 Pixel