Swann PRO-736 Bedienungsanleitung

Swann Sicherheitskamera PRO-736

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Swann PRO-736 (18 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war für 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/18

Dome Security Camera

with IR night vision

INSTRUCTION MANUAL

Before you begin

Limited Warranty Terms & Conditions

Swann Communications warrants this product against defects in workmanship and material for a

period of one (1) year from its original purchase date. You must present your receipt as proof of date

of purchase for warranty validation. Any unit which proves defective during the stated period will be

repaired without charge for parts or labour or replaced at the sole discretion of Swann. The end user

is responsible for all freight charges incurred to send the product to Swann’s repair centres. The end

user is responsible for all shipping costs incurred when shipping from and to any country other than

the country of origin.

The warranty does not cover any incidental, accidental or consequential damages arising from the use

of or the inability to use this product. Any costs associated with the fitting or removal of this product by

a tradesman or other person or any other costs associated with its use are the responsibility of the end

user. This warranty applies to the original purchaser of the product only and is not transferable to any

third party. Unauthorized end user or third party modifications to any component or evidence of misuse

or abuse of the device will render all warranties void.

By law some countries do not allow limitations on certain exclusions in this warranty. Where applicable

by local laws, regulations and legal rights will take precedence.

For Australia: Our goods come with guarantees which cannot be excluded under Australian Consumer

Law. You are entitled to a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if

the goods fail to be of acceptable quality and the failure does not amount to major failure.

FCC Verification

NOTE: This equipment has been tested and found to comply with the limits for Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected

• Consult the dealer or an experienced radio/TV technician for help

These devices comply with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

• These devices may not cause harmful interference, and

• These devices must accept any interference received, including interference that may cause

undesired operation.

Important Note:

All jurisdictions have specific laws and regulations relating to the use of cameras. Before using any

camera for any purpose, it is the buyer’s responsibility to be aware of all applicable laws and regulations

that prohibit or limit the use of cameras and to comply with the applicable laws and regulations.

WARNING

Modifications not approved by the party responsible for compliance could void user’s authority to

operate the equipment.

IMPORTANT SAFETY INSTRUCTIONS

• Make sure product is fixed correctly and stable if fastened in place.

• Do not operate if wires and terminals are exposed.

Congratulations on your purchase of this ! The PRO-CAM is Swann PRO Camera

very sensitive to light and therefore can make use of even the smallest amount

of light to provide an image of what it sees. In low light, this comes through as

a black and white image.

In complete or near-total darkness, the camera uses built-in infrared LEDs to

illuminate the area in front of it. This light is invisible to the human eye, although

you might notice a faint red glow coming from the front of the camera - this is

normal.

In day or well lit environments, the IR Cut Filter feature of the camera activates

to filter out wavelengths of light the camera does not need in order to provide

a clear color image.

About the Camera

Choosing a Location for the Camera

To get optimal results from your camera, where you install is important. You

should consider the distance between the camera and its subject to ensure

you obtain a good view of the areas in focus. Also think about the appropriate

mounting places (e.g., under the eaves of a roof is a good choice) where it won’t

be either an easy target for vandals or affected by constant light reflections of

moving vehicles (which can result in falsely triggered motion detection). There

are a number of factors you will need to consider when choosing where to mount

your camera - not least of which is what you will want to see.

General Guidelines

• Try to place the camera in an position that a potential security threat will find it

difficult to avoid. A strategy which is often effective is to monitor entrances and

exits - after all, a security threat has to get in somewhere.

• Install the camera in shady spot. Even though the camera is weather and water-

resistant, prolonged exposure to adverse weather conditions (direct sunlight

or excessive moisture) may eventually damage the internal components of the

camera and adversely affect its performance.

• Try to aim the camera at an area which is evenly lit, as objects or people in

shadows near brightly lit objects are very hard to see.

• Avoid having bright light sources in your image. This includes the obvious

(such as the sun or an artificial light source) but also things such as

reflections. Cars are notorious for reflected light sources, as are buildings

with a lot of windows, mirrors and so forth.

• The camera’s night vision will give well-exposed images if the area is dark.

However, if there’s a bright light source in the camera’s view (a streetlight,

car headlights or similar) then it might not engage night vision mode.

Produktspezifikationen

Marke:	Swann
Kategorie:	Sicherheitskamera
Modell:	PRO-736
Gewicht:	305 g
AC-Netzadapter:	Ja
Mitgelieferte Kabel:	BNC
Produktfarbe:	Weiß
Internationale Schutzart (IP-Code):	IP67
Übertragungstechnik:	Kabelgebunden
Höhe:	90 mm
Befestigungstyp:	Decke/Wand
Gleichstrom-Anschluss (DC):	Ja
Betriebstemperatur:	-20 - 60 °C
Typ:	CCTV Sicherheitskamera
Kabellänge:	18 m
Betriebsanleitung:	Ja
Gehäusematerial:	Aluminium
Montageset:	Ja
Schnittstelle:	BNC
Blickwinkel (FOV):	59 °
Formfaktor:	Kuppel
Durchmesser:	105 mm
DC-Ausgang Volt:	12
Tag/ Nachtmodus:	Ja
Mindestbeleuchtung:	0 Lux
Nachtsichtdistanz:	25 m
LED Typ:	IR
Sensor-Typ:	CMOS
Nachtsicht:	Ja
Infrarot-Wellenlänge:	850 nm
Anzahl der Beleuchtungs-LEDs:	24
Anzahl der TV-Linien:	700
NTSC Auflösung:	720 x 480 Pixel
PAL Auflösung:	720 x 576 Pixel
Infrarot LEDs Lebensdauer:	10000 h