Swann NHD-888MSD Bedienungsanleitung

Swann Sicherheitskamera NHD-888MSD

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Swann NHD-888MSD (2 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Swann Communications warrants this product against defects in workmanship and material for a period of

one (1) year from its original purchase date. You must present your receipt as proof of purchase for warranty

validation. Any unit which proves defective during the stated period will be repaired without charge for parts or

labour or replaced at the sole discretion of Swann. The end user is responsible for all freight charges incurred

to send the product to Swann’s repair centres. The end user is responsible for all shipping costs incurred when

shipping from and to any country other than the country of origin.

The warranty does not cover any incidental, accidental or consequential damages arising from the use of or

the inability to use this product. Any costs associated with the fitting or removal of this product by a tradesman

or other person or any other costs associated with its use are the responsibility of the end user. This warranty

applies to the original purchaser of the product only and is not transferable to any third party. Unauthorized end

user or third party modifications to any component will render all warranties void. By law some countries do not

allow limitations on certain exclusions in this warranty. Where applicable by local laws, regulations and legal

rights will take precedence.

For Australia: Our goods come with guarantees which cannot be excluded under Australian Consumer Law.

You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably

foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be

of acceptable quality.

This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) These devices may not cause harmful interference.

(2) These devices must accept any interference received, including interference that may cause undesired op-

eration.

Limited Warranty - Terms & Conditions5 FCC Verification6

4K Dome

Security Camera

With Face Recognition

Instruction Manual

Security Made Smarter

M888MSDCAMREV1E | © Swann 2019

Helpdesk & Resources

Securit y Made Smarter

Visit Swann Support Center at . You can register support.swann.com

your product for dedicated customer support, download guides, find

answers to commonly asked questions, and more.

Product Registration Customer Support

Product Manuals Frequently Asked Questions

Support Community

Introduction

Congratulations on the purchase of your Swann 4K

Dome Security Camera with Face Recognition.

• Cut the cost of crime & know what’s happening

with this robust dome camera to suit homes, of-

fices, small businesses & retail stores

• See faces, license plates, packages & capture

audio with state-of-the-art 4K Ultra HD, that’s

4x clearer than 1080p with powerful digital

zoom - ensuring you won’t miss a thing

• Swann’s True Detect heat & motion-based PIR

detection reliably captures & records activity,

with reliable push notifications & fewer false

triggers. Face recognition software lets you

identify specific people, such as children, to

alert you they are home safe

Important instructions

1. Make sure the camera is fixed correctly and stable

if fastened in place.

2. Never place strain of any kind on the network ca-

ble connection. It’s designed to clip into the Ethernet

port, but it won’t support weight and can be broken.

3. Do not operate if wires and terminals are exposed.

Important Note: All jurisdictions have specific laws

and regulations relating to the use of cameras. Be-

fore using any camera for any purpose, it is the buy-

er’s responsibility to be aware of all applicable laws

and regulations that limit the use of cameras.

About this Manual: The content in this manual is for

information purposes only and is subject to change

without notice. While every effort is made to ensure

that this manual is accurate at the time of printing, no

liability is assumed for any errors occurred.

1. Take into consideration what you want to monitor

and where you’ll get the best view of it.

2. How you’re going to connect the camera to your

monitoring system; remember that cables and

connections should be kept out of the weather.

3. How to keep the camera out of harm’s way. It’s

recommended to mount your camera at an elevated

position.

4. Place your camera as close to the area of interest

as practicable. The best position is from about

13ft/4m above looking slightly down, keeping in mind

the details you are looking for.

5. Although the sky looks nice when you look at the

live view from your camera, it is an unlikely direction

for an offender to approach. Make sure your camera

has minimal sky in it as the light in daylight can make

the foreground of the image darker.

6. Think about the most likely way a potential offender

may approach your home, use your camera to give

you the best coverage of these areas.

7. The camera’s casing is resistant to different

weather conditions and tampering. It would take an

overwhelming event to damage the housing.

8. Even though the camera is weather and water-

resistant, prolonged exposure to adverse weather

conditions such as sunlight or excessive moisture,

may eventually damage the internal components of

the camera and adversely affect its performance.

9. Run cables inside a wall cavity or other protected

enclosure, and ensure that all wiring and connectors

are insulated and protected from moisture.

10. Don’t put your cable near live electrical wiring. AC

electricity generates radio “noise” which can interfere

with the signal from your camera.

1 Connecting the Camera2 Camera Location Tips4

To connect the camera to your NVR, simply connect the supplied Ethernet cable to the LAN connection on the

camera then plug the other end of the cable into one of the camera inputs on the back of your NVR.

Please note: The power connector is provided as an alternative power option if required. Your NVR will

provide power over the Ethernet cable when connected and a separate power adapter is not required.

CAM7CAM7 C AM5CAM5

CAM8CAM8 C AM6CAM6

CAM3CAM3

CAM4CAM4

CAM1CAM1

CAM2CAM2WANWANAUDIO OUTAUDIO OUT VGAVGA

48V48V

Power

Ethernet Cable

LAN

The camera can be mounted onto a flat vertical or horizontal surface

and must be of sufficient strength to hold the camera.

→ Hold the dome enclosure and the dome ring then rotate (1) (2)

the mounting bracket clockwise to remove it from the (3)

camera.

→ Position the camera bracket in the location you want to (4)

mount it, and mark the mounting holes on the surface to

position the screws (a mounting template has been included).

→ Using the appropriate screws for the surface you are mounting

to, secure the bracket in place.

→ Run the cable then place the camera into the dome enclosure

and dome ring and aim the camera to the desired position. The

camera can be rotated left or right or up and down. Check the

image on your NVR and make adjustments as necessary.

→ After you’ve finished adjusting the viewing position, rotate the

dome ring to the mounting bracket counter clockwise to lock

the position in place.

Mounting the Camera3

Produktspezifikationen

Marke:	Swann
Kategorie:	Sicherheitskamera
Modell:	NHD-888MSD
Eingebautes Mikrofon:	Ja
Breite:	100 mm
Tiefe:	100 mm
Mitgelieferte Kabel:	LAN (RJ-45)
Produktfarbe:	Weiß
Internationale Schutzart (IP-Code):	IP66
Übertragungstechnik:	Kabelgebunden
Befestigungstyp:	Zimmerdecke
Betriebstemperatur:	-30 - 55 °C
Warentarifnummer (HS):	85258900
Typ:	IP-Sicherheitskamera
Betriebsanleitung:	Ja
Gehäusematerial:	Aluminium
Formfaktor:	Kuppel
Maximale Auflösung:	3840 x 2160 Pixel
Megapixel insgesamt:	8 MP
Anzahl der Kameras:	1
Mindestbeleuchtung:	- Lux
Nachtsichtdistanz:	60 m
Wetterfest:	Ja
Schrauben enthalten:	Ja
Nachtsicht:	Ja
Intelligent Video Surveillance-(IVS)-System-Eigenschaften:	Gesichtserkennung
Bewegungssensor:	Ja
Bewegungssensortechnologie:	Passiver Infrarot-Sensor (PIR)
Unterstützte Positionierung:	Innen & Außen