SVS SoundPath Tri-Band Bedienungsanleitung

SVS Netzwerkkarte / Adapter SoundPath Tri-Band

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr SVS SoundPath Tri-Band (8 Seiten) in der Kategorie Netzwerkkarte / Adapter. Dieser Bedienungsanleitung war fĂŒr 35 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/8
TRI-BAND WIRELESS AUDIO
ADAPTER
Owner’s Manual
Thank you for choosing SVS!
Congratulations on bringing home the , the SVS SoundPath Tri-Band Wireless Audio Adapter
best solution available for eliminating subwoofer cable clutter without sacriïŹcing performance.
Because it passes a full-range Left/Right stereo signal, you can also wirelessly connect stereo
speakers, powered surround sound speakers, ampliïŹers, and any stereo audio component.
The SoundPath Tri-Band Wireless Audio Adapter operates in the 2.4 GHz, 5.2 GHz and 5.8 GHz
bands and is highly resistant to all forms of wireless interference from common household
devices. Seamless switching between channels ensures your subwoofer, speakers or other audio
components will remain connected in even the most congested wireless environments so you can
always enjoy uninterrupted listening experiences.
Installation requires only a few simple steps. If you have questions about subwoofer or speaker
placement, system optimization or installing the SVS SoundPath Tri-Band Wireless Audio Adapter,
please contact the SVS Sound Experts tech support 7-days-a-week.
custservice@svsound.com | 877.626.5623 | www.svsound.com
SpeciïŹcations & Features
Adapter Includes
» Tri-Band Wireless Audio Transmitter
» Tri-Band Wireless Audio Receiver
» Mono RCA to RCA interconnect cable (x2)
» USB A to micro B power cable for power adaptor (x2)
» 5V DC power adapter with USB A Connector (x2)
» Velcro for securing devices (x2)
What You Will Need
» Output device (subwoofer, powered speakers or ampliïŹer)
» Source device (AV receiver, surround processor, or 2-channel pre-amp with a subwoofer pre-out
or L/R line level pre-out)
SpeciïŹcations
Operating Voltage
RF Frequency Band
Sample Rate
Working Distance
Transmitter analog input level
Receiver analog output level
Frequency Response
Latency
THD+N (dB)
SNR (dB)
Receiver
Minimum power requirement:
4.75V @0.3ARF
Tri-Band (auto switching)
2.4/5.2/5.8 GHz
48kHz
Up to 130 feet; line of sight
N/A
Maximum 1Vrms
6Hz – 20 kHz +/- 0.5 dB
< 19 milliseconds
-70 dB (10Hz – 20kHz)
+ 105 dB 10Hz – 20kHz
Transmitter
Minimum power requirement:
5V @0.5A
Tri-Band (auto switching)
2.4/5.2/5.8 GHz
48kHz
Up to 130 feet; line of sight
Maximum 2Vrms
N/A
6Hz – 20 kHz +/- 0.5 dB
< 19 milliseconds
-70 dB (10Hz – 20kHz)
+ 105 dB 10Hz – 20kHz
General Placement and Set-up Tips
» Place the subwoofer, powered speaker or ampliïŹer at its intended location.
» Try to maintain line-of-sight (no walls or solid barriers) between the transmitter
and receiver for best results.
» Receiver should be within 130 feet of transmitter for best results.
» Avoid placing the transmitter next to devices that could create signal interference, such as mobile
phones, baby monitors, RF wireless phones and Wi-Fi routers.
Connecting the Wireless Transmitter to an AV processor
1. Connect the mono RCA cable to the subwoofer out or LFE channel of the AVR or pre-amp
processor to the R/LFE input on the wireless transmitter.
2. Connect the USB A to Micro B cable to the wireless transmitter and the included 5 VDC power
supply. You can also use an available USB charging port with an output of at least 5V @ 0.5A
3. If using the 5 VDC power supply, connect to nearby power outlet.
Connecting the Wireless Transmitter to a 2-channel stereo pre-amp
1. Connect a stereo RCA cable to the L and R line level pre-outs of the 2-channel stereo
pre-amp and to L and R input on the wireless transmitter. – CABLE NOT SUPPLIED
2. Connect the USB A to Micro B cable to the wireless transmitter and the included 5 VDC
power supply. You can also use an available USB charging port with an output of at
least 5V @0.5A
3. If using the 5 VDC power supply, connect to nearby power outlet.
CENTER
REAR FR
SUBWOOFER
(SUB1)
LINE LEVEL OUTPUTS
dio In
RECEIVER/PREAMP
Audio In
(Transmitter)
L
P Power air
R
LINE LEVEL OUTPUTS REAR FRONT
R
L
RECEIVER/PREAMP
Audio In
(Transmitter)
L
P Power air
R

Produktspezifikationen

Marke: SVS
Kategorie: Netzwerkkarte / Adapter
Modell: SoundPath Tri-Band

Brauchst du Hilfe?

Wenn Sie Hilfe mit SVS SoundPath Tri-Band benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Netzwerkkarte / Adapter SVS

SVS

SVS SoundPath Bedienungsanleitung

11 April 2024
SVS

SVS SoundPath Tri-Band Bedienungsanleitung

20 Januar 2024

Bedienungsanleitung Netzwerkkarte / Adapter

Neueste Bedienungsanleitung fĂŒr -Kategorien-

Moxa

Moxa EPM-DK02 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa EPM-3032 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa EPM-DK01 Bedienungsanleitung

27 Juni 2024
TRENDnet

TRENDnet TEW-805UBH Bedienungsanleitung

26 Juni 2024
TRENDnet

TRENDnet TEW-907ECH Bedienungsanleitung

26 Juni 2024
TRENDnet

TRENDnet TEW-648UBM Bedienungsanleitung

26 Juni 2024
TRENDnet

TRENDnet TEW-809UB Bedienungsanleitung

26 Juni 2024
CLUB3D

CLUB3D CSV-2303H Bedienungsanleitung

23 Juni 2024
CLUB3D

CLUB3D SenseVision USB3.0 to HDMI Graphics Adapter Bedienungsanleitung

23 Juni 2024
CLUB3D

CLUB3D SenseVision USB3.0 to Displayport 1600p Graphics Adapter Bedienungsanleitung

23 Juni 2024