Supermicro AOMCTGI1SM Bedienungsanleitung

Supermicro Netzwerkkarte / Adapter AOMCTGI1SM

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Supermicro AOMCTGI1SM (19 Seiten) in der Kategorie Netzwerkkarte / Adapter. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/19

User's Guide

Revision 1.0a

AOC-CTG-i1S

User's Guide Revision 1.0a

Release Date: December 24, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this User's Guide has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

and makes no commitment to update or to keep current the information in this user's guide, or to

notify any person or organization of the updates. Please Note: For the most up-to-date version

of this user's guide, please see our Website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this user's guide at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between the manufacturer and the customer shall be governed by the laws of

Santa Clara County in the State of California, USA. The State of California, County of Santa Clara

shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

About this User's Guide

This user's guide is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of the

AOC-CTG-i1S add-on card.

About this Add-on Card

The AOC-CTG-i1S 10 Gigabit Ethernet Adapter is a exible and scalable Ethernet

adapter designed for today's demanding data center environments. Based on Intel's

82599EN 10GbE network controller, the AOC-CTG-i1S addresses the demanding

needs of next-generation data centers by providing virtualization features, LAN and

SAN networking exibility, and proven reliable performance. The AOC-CTG-i1S is

designed in a small microLP form factor to t within Supermicro Twin server systems.

An Important Note to the User

All images and layouts shown in this user's guide are based upon the latest PCB

Revision available at the time of publishing. The card you have received may or

may not look exactly the same as the graphics shown in this user's guide.

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required before

any warranty service will be rendered. You can obtain service by calling your ven-

dor for a Returned Merchandise Authorization (RMA) number. When returning the

motherboard to the manufacturer, the RMA number should be prominently displayed

on the outside of the shipping carton, and the shipping package is mailed prepaid

or hand-carried. Shipping and handling charges will be applied for all orders that

must be mailed when service is complete. For faster service, You can also request

a RMA authorization online (http://www.supermicro.com/RmaForm/).

This warranty only covers normal consumer use and does not cover damages in-

curred in shipping or from failure due to the alternation, misuse, abuse or improper

maintenance of products.

During the warranty period, contact your distributor rst for any product problems.

Preface

iii

Produktspezifikationen

Marke:	Supermicro
Kategorie:	Netzwerkkarte / Adapter
Modell:	AOMCTGI1SM
WLAN:	Nein
Tiefe:	235 mm
Mitgelieferte Kabel:	SFP+
Produktfarbe:	Grün
Übertragungstechnik:	Kabelgebunden
Betriebstemperatur:	0 - 55 °C
Unterstützte Netzwerkprotokolle:	IPv4, IPv6
Eingebauter Ethernet-Anschluss:	Ja
Maximale Datenübertragungsrate:	1000 Mbit/s
Ethernet LAN Datentransferraten:	10,100,1000 Mbit/s
Eingebaut:	Ja
Ladungsausgleichsystem:	Ja
Anzahl der USB-Anschlüsse:	2
USB-Version:	2.0
Schnittstelle:	Ethernet
Ethernet Schnittstellen Typ:	10 Gigabit
LAN-Controller:	Intel® 82599EN
Nachhaltigkeitszertifikate:	RoHS
Hostschnittstelle:	PCI Express
Datenübertragungsrate:	5 GT/s
Unterstützte Server-Betriebssysteme:	Windows Server 2008 R2, Windows Server 2008 R2 x64
Optischer Kabelverbinder:	LC
Anzahl Faseranschlüsse:	1
PCI version:	2.0
Intel® Virtual Machine Device Queues (VMDq):	Ja