Suntec Wellness Transform 7000 Bedienungsanleitung
Suntec Wellness
Klimatisierung
Transform 7000
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Suntec Wellness Transform 7000 (13 Seiten) in der Kategorie Klimatisierung. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/13
Instruction Manual
2
INTRODUCTION / TECHNICAL DATA
Congratulations on purchasing your SUNTEC WELLNESS KLIMATRONIC
®
TRANSFORM unit.
Your air-conditioner has been developed and manufactured in accordance with standards of state of the art
technology.
Please read the operating instructions carefully before connecting your TRANSFORM unit to the power
supply in order to prevent damage from improper use. Pay special attention to the safety instructions. If you
pass this TRANSFORM unit on to a third party, you must also include these operating instructions. Please
keep these operating instructions in a safe place for any questions which may arise in future.
Thank you for showing confidence in our product. We hope you enjoy a pleasant room climate with your
Suntec air-conditioner.
MODEL TRANSFORM
7000 TRANSFORM
9000 TRANSFORM
10500 TRANSFORM
12000 TRANSFORM
14000
VOLT 230V 50Hz AC 230V 50Hz AC 230V 50Hz AC 230V 50Hz AC 230V 50Hz AC
POWER CONSUMPTION (W) 760 W 990 W 1150 W 1340 W 1530 W
(Wb24 /Db35)
POWER CONSUMPTION (W)
COOLING 900 W 1100 W 1280 W 1480 W 1700 W
HEATING
(EN60335)
700 W 950 W 1100 W 1300 W 1500 W
COOLING CAPACITY 2.000 W 2.600 W 3.000 W 3.500 W 4.000 W
HEATING CAPACITY 2.000 W 2.600 W 3.000 W 3.500 W 4.000 W
(Wb24 / Db35)
DEHUMIDIFICATION
CAPACITY
(30, RH80%)
30L/day 50L/day 50L/day 60L/day 70L/day
NOISE 50dB(A) 51 dB(A) 52dB(A) 53dB(A) 54dB(A)
AIR CIRCULATION [m³/h] 360 400 420 450 450
COOLING AGENT R410a R410a R410a R410a R410a
REMOTE CONTROL INCLUSIVE INCLUSIVE INCLUSIVE INCLUSIVE INCLUSIVE
TIME SWITCH 0-24 STD 0-24 STD 0-24 STD 0-24 STD 0-24 STD
DIMENSIONS (mm) WXDXH 300x480x630 300x480x630 300x505x778 300x505x778 300x505x778
NET WEIGHT 24 kg 25 kg 28 kg 29.5 kg 30,5 kg
All figures are approx. data. Characteristics pursuant to current Norm EN 14511. Subject to alterations.
EASY TO OPERATE AND EASY TO MOVE AROUND
The TRANSFORM unit can be moved easily on rollers from room to room.
The air quantity can be adjusted via up to three ventilation levels.
The air flow can be very strong and reach up to 5 or 6 metres.
Installation by a specialist is not required
Simply plug into a normal household socket with an operating voltage of 230V/ 50Hz.
The extract air hose can be stored in the TRANSFORM unit for transport and when not in use.
This Suntec TRANSFORM unit operates in accordance with the heat pump principle. On account of the
special, innovative construction of the TRANSFORM unit, its heating function is extremely efficient
compared to conventional heating units.
SCOPE OF DELIVERY
1 x TRANSFORM unit
1 x remote control
1 x air hose 150 cm
1 x air hose connector
1 x bracket air hose
1 x sir outlet grid
1 x coarse filter top, 1 coarse filter
bottom
1 x activated carbon filter top
1 x operating instructions
1 x drainage hose 50 cm
2 x sealing plug
3
BEFORE INITIATION
1. To avoid damage, place the TRANSFORM unit in an upright position for at least 24 hours
before initiation.
2. Release the holder air hose in the TRANSFORM unit and take out the extract air hose.
3. Fasten the air hose before initiating the TRANSFORM unit.
4. Turn the extract air hose in the direction of the arrow (1) displayed and remove it from the
TRANSFORM unit.
5. Turn the extract air hose in the direction of the arrow (2) displayed and connect it to the
TRANSFORM unit.
6. Plug the power plug into a socket. Never pull the plug out of the socket with force using the
connection line. This can damage the power cable.
7. Since the TRANSFORM unit emits hot air, please observe a sufficient minimum safety
distance to each wall. (Fig. 1)
8. Despite the splash water protection, you should not operate the TRANSFORM unit in moist
areas, such as e.g. swimming baths or similar areas.
9. The colour of the TRANSFORM unit can change slightly due to direct solar radiation.
10. The TRANSFORM unit is equipped with a special thermal deactivation. This protects the unit
from overheating in extreme ambient conditions.
11. Please place the TRANSFORM unit so that the air inlet is not impeded, e.g. by furniture or
curtains, since this can negatively effect the capacity.
12. Do not allow direct sunlight to shine on the TRANSFORM unit, since it may then overheat and
automatically deactivate on account of the thermal deactivation.
Produktspezifikationen
| Marke: | Suntec Wellness |
| Kategorie: | Klimatisierung |
| Modell: | Transform 7000 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Suntec Wellness Transform 7000 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Klimatisierung Suntec Wellness
24 August 2024
22 August 2024
19 August 2024
18 August 2024
18 August 2024
17 August 2024
17 August 2024
10 August 2024
8 August 2024
7 August 2024
Bedienungsanleitung Klimatisierung
- Klimatisierung Domo
- Klimatisierung AEG
- Klimatisierung Technoline
- Klimatisierung Inventum
- Klimatisierung Sharp
- Klimatisierung Solac
- Klimatisierung Trebs
- Klimatisierung Alpina
- Klimatisierung Eheim
- Klimatisierung Tectro
- Klimatisierung Perel
- Klimatisierung Turmix
- Klimatisierung OneConcept
- Klimatisierung Vaillant
- Klimatisierung Duux
- Klimatisierung Honeywell
- Klimatisierung Zibro
- Klimatisierung Redmond
- Klimatisierung Livington
- Klimatisierung EUFAB
- Klimatisierung Stiebel Eltron
- Klimatisierung Truma
- Klimatisierung Faber
- Klimatisierung Buderus
- Klimatisierung EWT
- Klimatisierung Magnum
- Klimatisierung Econo-heat
- Klimatisierung Eberle
- Klimatisierung Bulex
- Klimatisierung Elco
- Klimatisierung EXCELLENT Electrics
- Klimatisierung Finicompressors
- Klimatisierung Mr Safe
- Klimatisierung Nobo
- Klimatisierung Rittal
- Klimatisierung Sawo
- Klimatisierung Webasto
- Klimatisierung Simplify
Neueste Bedienungsanleitung für -Kategorien-
24 September 2024
18 September 2024
17 September 2024
16 September 2024
16 September 2024
8 September 2024
1 September 2024
28 August 2024
28 August 2024
27 August 2024