Sunstech FRD16 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sunstech FRD16 (17 Seiten) in der Kategorie Radiowecker. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/17
FRD16
Instruction Manual
FRD16
Safety Precautions
Read the following recommended safety precautions carefully.
Power Source
Before plugging in for the first time, read the following section carefully.
This device should be operated on 240V AC, 50 Hz outlet.ly from a 220-
Be sure that the power supply voltage of the area be used meets the required
voltage and you select the correct voltage setting for your device.
Power Cord
Do not place the set, a piece of furniture, etc. on the power cord or pinch the cord.
Handle the power cord by the plug. Do not unplug the appliance by pulling from
the power cord and never touch the power cord with wet hands as this could cause
a short circuit or electric shock.
Never make a knot in the cord or tie it with other cords. The power cord should be
placed in such a way that they are not likely to be stepped on. A damaged power
cord can cause fire or give you an electric shock. When it is damaged and needs to
be replaced, it should be done by qualified personnel.
Moisture and Water
Do not use this device in a humid and damp place (avoid the
bathroom, the sink in the kitchen, etc). Do not expose this
device to rain or water, as this may be dangerous and do not
place objects filled with liquids, such as flower vases, on top.
If any solid object or liquid falls into the cabinet, unplug the
connected device(s)immediately and have it checked by qualified personnel
before operating it any further.
Cleaning
Before cleaning, unplug this device from the wall outlet. Do
not use an aggressive liquid or aerosol cleaners. Use a soft and
dry cloth.
Ventilation
The slots and openings on the device are intended for ventilation and to ensure
reliable operation. To prevent overheating, these opening must not be blocked or
covered in anyway. When installing this unit make sure to leave space sufficient
around the unit to ensure the ventilation to improve heat radiation.
Do not expose the unit to extreme conditions of heat, cold or moisture
Heat and Flames
The device should not be placed near to open flames or sources of intense heat
such as an electric heater. Ensure that no open flame sources,
such as candles, are placed on top of the device. Batteries
should not be exposed to excessive heat such as sunshine, fire
or the like.
Lightning
In case of storm and lightning or when going on holiday,
disconnect the power cord from the wall outlet.
Replacement Parts
When replacement parts are required, make sure that the service technician has
used replacement parts, which are specified by the manufacturer or have the same
specifications as the original one. Unauthorized substitutions may result in fire,
electrical shock or other hazards. Please contact the brand or manufacturer that will
redirect you to the nearest technical service which will supply or change the
replacement parts
Servicing
Please refer all servicing to qualified personnel of the brand. Do
not remove the cover yourself as this may result in an electric
shock.
Risk of electric shock
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of not insulate, “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock of persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Waste Disposal
Instructions for waste disposal:
- Packaging and packaging aids are recyclable and should principally be recycled.
Packaging materials, such as a plastic bag, must be kept away from children.
EN-1
EN-2
- -Batteries, including those which are heavy metal free, should not be disposed of
with household waste. Please dispose of used batteries in an environmentally
friendly manner. Find out about the legal regulations which apply in your area.
- Do not try to recharge batteries, can have a danger of explosion. Replace batteries
only with the same or equivalent type.
This symbol on the product or on its packaging means that your electrical device
should be disposed at the end of its service life, separately from your household
wastes. There are separate collection systems for recycling in the EU. For more
information, please contact the local authority or the dealer where you purchased
the product.
Symbol for equipment
Symbol for
batteries Symbol for batteries
Disconnecting the Device
The mains plug is used to disconnect the device from the mains and therefore it
must remain readily operable.
Headphone Volume
In your device has headphones jack, please note that excessive sound
pressure from earphones and headphones can cause hearing loss.
Installation
To prevent injury, this device must be securely attached to the wall in accordance
with the installation instructions when mounted to the wall (if the option is
available).
Warning:
Do not leave your device in standby or operating mode when you leave your
house.
The Standby / On button does not fully switch off this product.
Moreover the device continues to consume power in standby
mode. In order to separate the device completely from mains, the
mains plug has to be pulled from the mains socket. Because of that the device
should be set up in a way, that an unobstructed access to the mains socket is
guaranteed, so that in case of emergency the mains plug can be pulled
immediately. During periods of prolonged non use, the device should be -
disconnected from the mains power supply.
Electrical device not in the hands of children
Never let children use electrical devices unsupervised. Children cannot always
recognize any possible dangers. Batteries / accumulators can be life threatening
when swallowed. Store batteries out of the reach of children. In case of swallowing
a battery, medical aid has to be sought immediately. Also keep the packaging away
from children as there is danger of suffocation.
DESCRIPTION
1. HOUR/TU-
2. MIN/TU+
3. ON/OFF/AM/FM
4. SNOOZE / SLEEP
5. SET/PRE/M+
6. AL1/VOL -
7. AL2/VOL+
8. BATTERY COMPARTMENT
9. SPEAKER
10. LENS DISPLAY
CONNECTING THE RADIO
PLUG THE AC CORD INTO THE POWER OUTLET. WHEN ELECTRICAL POWER HAS
BEEN INTERRUPTED AND RESTORED, THE CLOCK DISPLAY WILL SHOW THE TIME.
MAKE SURE TO RESET BOTH THE CORRECT TIME AND ALARM TIME FOR PROPER
OPERATION.
TIME SETTING
PRESS AND HOLD THE TIME SET/PRE/M+ (5), THEN THE CLOCK DISPLAY WILL BLINK.
PRESS THE MIN/TU+ (2) OR HOUR/TU- (1) TO SET THE CLOCK DISPLAY TO THE
CORRECT TIME. PRESS SET /PRE/M+ (5) AGAIN WHEN FINISHED THE SETTING, THE
TIME DISPLAY WILL NOT BLINK.
RADIO OPERATION
PRESS ON/OFF/AM/FM (3) ONCE, IT WILL TURN ON THE RADIO, PRESS
ON/OFF/AM/FM (3) AGAIN TO SELECT AM BAND OR FM BAND. PRESS MIN/TU+ (2)
OR HOUR / TU-(1) TO ADJUST YOUR DESIRED FREQUENCY. PRESS AL 2/VOL + (7) TO
INCREASE THE VOLUME, THE MAXIMUM LEVEL UP TO LEVEL 16. PRESS AL 1/VOL-(6)
TO DECREASE THE VOLUME, THE MINIMUM LEVEL OF VOLUME IS LEVEL 0.
MEMORY OPERATION
THE CLOCK RADIO CAN STORE 10AM AND 10FM PRESETS.
ON RADIO PLAYING MODE, SELECT YOUR DESIRED BAND , PRESS UP (FM/AM)
MIN/TU+ (2) OR HOUR / TU-(1) TO CHOOSE YOUR DESIRED FREQUENCY, LONG
PRESS SET/PRE/M+ (5) TO ENTER INTO PRESET MODE, THE PRESET
EN-3
EN-4


Produktspezifikationen

Marke: Sunstech
Kategorie: Radiowecker
Modell: FRD16

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sunstech FRD16 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Radiowecker Sunstech

Bedienungsanleitung Radiowecker

Neueste Bedienungsanleitung für -Kategorien-