Sunding SD-576B Bedienungsanleitung

Sunding Fahrradcomputer SD-576B

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sunding SD-576B (2 Seiten) in der Kategorie Fahrradcomputer. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
tire size
circumference
tire size
circumference
tire size
circumference
12×1.75 935
12×1.95 940
14×1.50 1020
14×1.75 1055
16×1.50 1185
16×1.75 1195
16×2.00 1245
16×1-1/8 1290
16×1-3/8 1300
17×1-1/4 1340
18×1.50 1340
18×1.75 1350
20×1.25 1450
20×1.35 1460
20×1.50 1490
20×1.75 1515
20×1.95 1565
22×1-3/8 1770
22×1-1/2 1785
24×1.75 1890
24×2.00 1925
24×2.125 1965
24×1(520) 1753
24×/34Tubular 1785
24×1-1/8 1795
24×1-1/4 1905
26×1(599) 1913
26×1.25 1950
26×1.40 2005
26×1.50 2010
26×1.75 2023
26×1.95 2050
26×2.10 2068
26×2.125 2070
26×2.35 2083
26×3.00 2170
26×1-1/8 1970
26×1-3/8 2068
26×1-1/2 2100
26×7/8 1920
650×20C 1938
650×23C 1944
650×25C 1952
650×38A 2125
650×38B 2105
27×1(630) 2145
27×1-1/8 2155
27×1-1/4 2161
27×1-3/8 2169
27.5×1.50 2079
27.5×1.95 2090
27.5×2.1 2148
27.5×2.25 2182
700×18C 2070
700×19C 2080
700×20C 2086
700×23C 2096
700×25C 2105
700×28C 2136
700×30C 2146
700×32C 2155
700Tubular 2130
700×35C 2168
700×38C 2180
700×40C 2200
700×42C 2224
700×44C 2235
700×45C 2242
700×47C 2268
29×2.1 2288
29×2.2 2298
29×2.3 2326
CLK Mode(12H/24H)
Sensor Wiring
Computer Battery Installation
While the default Maintenance Alert digit
200 RIGHTkm/m is flas hing, Press the button
to choose km/m. Press the 200/400/600/800
left button to confirm and enter into Clock
mode. (when the the Maintenance ODO
Alert digit you setted, the will appear on
the screen to alert the rider, press the RIGHT
button seconds to cancel it.)3
SPD CURRENT SPEED
ODO ODOMETER (0.001~99999km/m)
DST TRIP DISTANCE
MXS MAXIMUM SPEED
AVS AVERAGE SPEED
TM ELAPSED TIME
CLK CLOCK (12H/24H)
SCAN
“-” “+” COMPARATOR
SETTING SPEED SCALE ,(km/h m/h)
SETTING TYRE CIRCUMFERENCE (0mm~9999mm)
SETTING THE LAST VALUE OF ODOMETER /ODO
MAINTENANCE ALERT
FREEZE FRAME MEMORY
DOUBLE CELL BOXES
BACK LIGHT
AUTO ON OFF /
SD-576B (17 function)
FUNCTIONS
Remove the battery cover from the bottom of
the computer by using a flat blade screwdriver,
install one CR2032 battery with the positive (+)
pole facing the battery cover and replace the
cover. Should the LCD show irregular figures,
take out the battery and reinstall it.
Speedometer Sensor
Attach the sensor transmitter to either front fork using the supplied cable
ties. Fit the magnet to a spoke using the diagram above as a guide.
Position the sensor & magnet as shown above. Take care to align the
magnet to either arrow on the sensor with 3mm gap in between.
Route the sensor wire up the fork blade,
using the cable ties to secure it. Make
sure it does not hinder the movement
of the front wheel.
Mounting Shoe
Attach the mounting shoe with the cable ties
to thehandlebars as shown in the diagram.
Attach the comprter to the mounting shoe by
slidingthe unit until it snaps firmly into bosition. To remove, press down on
therelease catch, and remove the computer.
To check for proper speed function and sensor alignment, spin the front
wheel withthe computer in speed mode. Adujst the position of sensor and
magnet if there is onor weak signal.
Computer
Wheel Size Input
‘ ’ appears on the screed when the battery has been installde, with 2060
one figure flashing enter the wheel circumerence using the formula below.
In the example above you would enter . Press the button to 2198 RIGHT
advance the digits as nedded and the button to confirm and LEFT
advance. (The circumference ranges 0mm~9999mm), press the LEFT
button to enter mode.KM/M
Setting(km/h)/(m/h)
Press the button to choose or .RIGHT km/h m/h
Press the button to enter mode.LEFT CLOCK
Setting Maintenance alert
In Mode, press the button for seconds CLOCK LEFT 5
to enter selection. Press once more to swap 12/24H
between hours. Press the button to 12/24 RIGHT
enter the Hour mode, when the figure indicating
HOUR LEFT starts to flash, press the button to adjust
it. Continue to press the button to enter the RIGHT
Minute mode, when the figureindicating MINUTE
starts to flash, press the button to adjust. Press the button LEFT RIGHT
to confirm & press the button again to switch to mode. RIGHT ODO
Instruction Manual
NOOFF
Open
Close
Coi n
Notice
Pass bicycle spokes through
the plastic hole on the bottom
of the magnet and tighten to
secure
The magnet is designed for spokes
that are less than 2mm thick
In mode, press the button for seconds to ODO LEFT 5
set the value. The initial value is . when ODO 0000.0
one figure flashes, press the button to adjust it, RIGHT
and the LEFT button to confirm and start to set the
next figure. NOTE: Before re-installing the battery,
take a note of yourmileage and then re-enter the value
once the battery is replaced.
Setting the Last value of Odometer
Accessories
Malfunctions and Problems
Button Instruction
Freeze Frame Memory
Sleep Mode
Trip Time
Average Speed
Maximum Speed (MXS)
Reset of Mileage Parameter
In mode, press and hold both the and buttons ODO RIGHT LEFT
simultaneously for seconds to clear the tyre circumference and (km/m) 5
setings. The clock settings will remain unchanged.
Speedometer
In mode, the total distance is indicated ODO
on-screen.
The mileage range is ~ km(m). The 0.001 99999
display will return to when the value exceeds its 0
maximum limit,press the button to enter mode.RIGHT DST
Speed is shown at all times on-screen, its maximum reading is
99.9 0.1km/h(m/h), and is accurate to +/- km/h (m/h).
Speed Comparator
During riding, ‘ ’ and ‘ ’ indicates the current speed + -
is higher or lower than the average speed (AVS).
Odometer
Trip Distance (DST)
In mode, the distance for one trip is indicated DST
on the bottom line. ranges from km(m).DST 0~9999
When the value exceed the range limit, it resets to 0
automatically. Both the time and the distance records
will be cleared when the time of one trip exceed the
range limits.Press the button for seconds to LEFT 5
clear the records of , ,DST MXS AVS and . TM
Press the button to enter mode.RIGHT MXS
In mode, maximum speed is indicated on the MXS
bottom line. Press the button for seconds to LEFT 5
clear the records of , , MXS DST AVS TM and .
In AVS mode, average speed is indicated on the
bottom line.Press the button for seconds to LEFT 5
clear the records of AVS DST MXS TM, , and .
Press the right button to enter mode.TM
In mode, trip time is indicated on the bottom line.TM
TM ranges from to , and will be reset 0:00:00 99:59:59
to when the value exceed the limit.0
Press the button for seconds to clear the LEFT 5
records of , , and TM DST MXS AVS.
Press the button to enter mode.RIGHT SCAN
Scan
In mode , , , SCAN DST MXS AVS TM and modes are
indicated in turn every seconds.4
Press the button to enter Mode.RIGHT CLOCK
If no signal has been received for seconds, the computer will enter 300
into Sleep Mode, the value remains stored. It will turn back to the CLK
previous mode with allthe data collected when the signal is received again
or any button is pressed.
Press the button at any time to enter into freeze frame memory LEFT
mode. Flashing data will appear on the screen. Press the TM RIGHT
button to view the records of , , DST MXS AVS TM. and
Press the button to choose any mode below : , , , RIGHT ODO DST MXS
AVS TM SCAN DST MXS AVS TM CLOCK, , ( , , & ) and . It is not necessary
to press the button except to select the Freeze frame Memory LEFT
mode.
In Freeze Frame Memory mode, press the button, data will be RIGHT
displayed, press button once more to return back to other modes.LEFT
Malfunction
Problems
No speedometer
Incorrect magnet / sensor alignment.
Inaccurate value is
indicated
Improper input, such as wheel
circumference.
Slow display response
Temperature exceeds operating limits
(0°C~55°C).
Black display
Temperature too high, or placed in direct
sunlight for too long. Let the unit cool
down.
Weak display
Poor battery contact or dead battery.
Display shows irregular
figures
Take out battery and re-install after 10
seconds.
Sensor Transmitter
Mounting Shoe
Cable Ties
Wheel Magnet
Battery (3V / CR2032)
Back Light
The back light function is switched on or off when you press any button
during 18:00~06:00.Itwill not work at any other time.

Produktspezifikationen

Marke: Sunding
Kategorie: Fahrradcomputer
Modell: SD-576B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sunding SD-576B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Fahrradcomputer Sunding

Sunding

Sunding SD-563A Bedienungsanleitung

10 Oktober 2024
Sunding

Sunding SD-558A Bedienungsanleitung

21 August 2024
Sunding

Sunding JOY-583BT Bedienungsanleitung

21 August 2024
Sunding

Sunding SD-576B Bedienungsanleitung

21 August 2024
Sunding

Sunding SD-568A Bedienungsanleitung

20 August 2024
Sunding

Sunding SD-536 Bedienungsanleitung

20 August 2024
Sunding

Sunding SD-576C Bedienungsanleitung

20 August 2024
Sunding

Sunding SD-571 Bedienungsanleitung

20 August 2024
Sunding

Sunding SD-570 Bedienungsanleitung

19 August 2024
Sunding

Sunding SD-558C Bedienungsanleitung

19 August 2024

Bedienungsanleitung Fahrradcomputer

Neueste Bedienungsanleitung für -Kategorien-

Cateye

Cateye CC-ED400 Enduro Bedienungsanleitung

14 Oktober 2024
Blackburn

Blackburn Delphi 5.0 Bedienungsanleitung

14 Oktober 2024
Prophete

Prophete 0512 Bedienungsanleitung

13 Oktober 2024
CicloSport

CicloSport CicloMaster CM 408 Bedienungsanleitung

13 Oktober 2024
Vetta

Vetta RT255L Bedienungsanleitung

12 Oktober 2024
Filzer

Filzer dZ4LW3 Bedienungsanleitung

12 Oktober 2024
Falk

Falk Pantera Bedienungsanleitung

12 Oktober 2024
Trek

Trek Incite 11i Bedienungsanleitung

12 Oktober 2024
Blackburn

Blackburn Delphi 4.0 Bedienungsanleitung

9 Oktober 2024
CicloSport

CicloSport CicloMaster CM 2.11 Bedienungsanleitung

9 Oktober 2024